Photoinduced Self-Gating of Perovskite Photovoltaic Cells in Ionic Liquid.

We demonstrate that the power conversion efficiency (PCE), photocurrent, and fill factor (FF) of perovskite solar cells (PSC) can be significantly improved by the photoinduced self-gating in ionic liquids (ILs) via n-doping of the carbon nanotube (CNT) top electrode on the fullerene electron transport layer (ETL). CNTs, graphene, and other carbon electrodes have been proven to be stable electrodes for PSC, but efficiency was not high. We have previously shown that the performance of PSCs with CNT electrodes can be improved by IL gating with gate voltage () applied from an external power source.

More Powerful Twistron Carbon Nanotube Yarn Mechanical Energy Harvesters.

Stretching a coiled carbon nanotube (CNT) yarn can provide large, reversible electrochemical capacitance changes, which convert mechanical energy to electricity. Here, it is shown that the performance of these "twistron" harvesters can be increased by optimizing the alignment of precursor CNT forests, plastically stretching the precursor twisted yarn, applying much higher tensile loads during precoiling twist than for coiling, using electrothermal pulse annealing under tension, and incorporating reduced graphene oxide nanoplates. The peak output power for a 1 and a 30 Hz sinusoidal deformation are 0.

Ionically Gated Small-Molecule OPV: Interfacial Doping of Charge Collector and Transport Layer.

We demonstrate an improvement in the performance of organic photovoltaic (OPV) systems based on small molecules by ionic gating via controlled reversible n-doping of multi-wall carbon nanotubes (MWCNTs) coated on fullerene electron transport layers (ETLs): C and C. Such electric double-layer charging (EDLC) doping, achieved by ionic liquid (IL) charging, allows tuning of the electronic concentration in MWCNTs and the fullerene planar acceptor layers, increasing it by orders of magnitude. This leads to the decrease of the series and increase of the shunt resistances of OPVs and allows use of thick (up to 200 nm) ETLs, increasing the durability of OPVs.

Suppression of Electric Field-Induced Segregation in Sky-Blue Perovskite Light-Emitting Electrochemical Cells.

Inexpensive perovskite light-emitting devices fabricated by a simple wet chemical approach have recently demonstrated very prospective characteristics such as narrowband emission, low turn-on bias, high brightness, and high external quantum efficiency of electroluminescence, and have presented a good alternative to well-established technology of epitaxially grown III-V semiconducting alloys. Engineering of highly efficient perovskite light-emitting devices emitting green, red, and near-infrared light has been demonstrated in numerous reports and has faced no major fundamental limitations. On the contrary, the devices emitting blue light, in particular, based on 3D mixed-halide perovskites, suffer from electric field-induced phase separation (segregation).

Room-Temperature Lasing from Mie-Resonant Nonplasmonic Nanoparticles.

Subwavelength particles supporting Mie resonances underpin a strategy in nanophotonics for efficient control and manipulation of light by employing both an electric and a magnetic optically induced multipolar resonant response. Here, we demonstrate that monolithic dielectric nanoparticles made of CsPbBr halide perovskites can exhibit both efficient Mie-resonant lasing and structural coloring in the visible and near-IR frequency ranges. We employ a simple chemical synthesis with nearly epitaxial quality for fabricating subwavelength cubes with high optical gain and demonstrate single-mode lasing governed by the Mie resonances from nanocubes as small as 310 nm by the side length.

Electronic structure of CsPbBrCl perovskites: synthesis, experimental characterization, and DFT simulations.

All-inorganic lead halide perovskites of various compositions have emerged as a prospective family of materials for light-emitting devices and photonic applications. However, a comprehensive study of their structural and electronic properties is still missing. Moreover, thin film fabrication of these perovskites comprising heterohalide anions by wet chemistry approaches also remains challenging.

Silver Nanowires on Carbon Nanotube Aerogel Sheets for Flexible, Transparent Electrodes.

Flexible, free-standing transparent conducting electrodes (TCEs) with simultaneously tunable transmittances up to 98% and sheet resistances down to 11 Ω/sq were prepared by a facile spray-coating method of silver nanowires (AgNWs) onto dry-spun multiwall carbon nanotube (MWNT) aerogels. Counterintuitively, the transmittance of the hybrid electrodes can be increased as the mass density of AgNWs within the MWNT aerogels increases; however, the final achievable transmittance depends on the initial transparency of the MWNT aerogels. Simultaneously, a strong decrease in sheet resistance is obtained when AgNWs form a percolated network along the MWNT aerogel.

A Few-Minute Synthesis of CsPbBr Nanolasers with a High Quality Factor by Spraying at Ambient Conditions.

Inorganic cesium lead halide perovskite nanowires, generating laser emission in the broad spectral range at room temperature and low threshold, have become powerful tools for the cutting-edge applications in the optoelectronics and nanophotonics. However, to achieve high-quality nanowires with the outstanding optical properties, it was necessary to employ long-lasting and costly methods of their synthesis, as well as postsynthetic separation and transfer procedures that are not convenient for large-scale production. Here we report a novel approach to fabricate high-quality CsPbBr nanolasers obtained by rapid precipitation from dimethyl sulfoxide solution sprayed onto hydrophobic substrates at ambient conditions.

Tunable Hybrid Fano Resonances in Halide Perovskite Nanoparticles.

Halide perovskites are known to support excitons at room temperatures with high quantum yield of luminescence that make them attractive for all-dielectric resonant nanophotonics and meta-optics. Here we report the observation of broadly tunable Fano resonances in halide perovskite nanoparticles originating from the coupling of excitons to the Mie resonances excited in the nanoparticles. Signatures of the photon-exciton (" hybrid") Fano resonances are observed in dark-field spectra of isolated nanoparticles, and also in the extinction spectra of aperiodic lattices of such nanoparticles.

Polar-Electrode-Bridged Electroluminescent Displays: 2D Sensors Remotely Communicating Optically.

A novel geometry for electroluminescent devices, which does not require transparent electrodes for electrical input, is demonstrated, theoretically analyzed, and experimentally characterized. Instead of emitting light through a conventional electrode, light emission occurs through a polar liquid or solid and input electrical electrodes are coplanar, rather than stacked in a sandwich configuration. This new device concept is scalable and easily deployed for a range of modular alternating-current-powered electroluminescent light sources and light-emitting sensing devices.

Woven-Yarn Thermoelectric Textiles.

The fabrication and characterization of highly flexible textiles are reported. These textiles can harvest thermal energy from temperature gradients in the desirable through-thickness direction. The tiger yarns containing n- and p-type segments are woven to provide textiles containing n-p junctions.

Optical, electrical, and electromechanical properties of hybrid graphene/carbon nanotube films.

By combining a graphene layer and aligned multiwalled carbon nanotube (MWNT) sheets in two different configurations, i) graphene on the top of MWNTs and ii) MWNTs on the top of the graphene, it is demonstrated that optical, electrical, and electromechanical properties of the resulting hybrid films depend on configurations.

Flexible, ultralight, porous superconducting yarns containing shell-core magnesium diboride-carbon nanotube nanofibers.

Magnesium-diboride-coated carbon nanotube arrays are synthesized by templating carbon-nanotube aerogel sheets with boron and then converting the boron to MgB2. The resultant MgB2-CNT sheets are twisted into flexible, light-weight yarns that have a superconducting transition around 37.8 K and critical current and critical field comparable with those of existing MgB2 wires, but have about 20 times lower density than bulk MgB2.

Nonlinear optical properties of boron doped single-walled carbon nanotubes.

Single-walled carbon nanotubes (SWCNTs) exhibit excellent nonlinear optical (NLO) properties due to the delocalized π electron states present along their tube axis. Using the open aperture Z-scan method in tandem with X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy, we demonstrate the simultaneous tailoring of both electronic and NLO properties of SWCNTs, from ultrafast (femtosecond) to relatively slow (nanosecond) timescales, by doping with a single substituent, viz., boron.

Structure and process-dependent properties of solid-state spun carbon nanotube yarns.

The effects of processing conditions and apparent nanotube length on properties are investigated for carbon nanotube yarns obtained by solid-state drawing of an aerogel from a forest of multi-walled carbon nanotubes. Investigation of twist, false twist, liquid densification and combination methods for converting the drawn aerogel into dense yarn show that permanent twist is not needed for obtaining useful mechanical properties when nanotube lengths are long compared with nanotube diameters. Average mechanical strengths of 800 MPa were obtained for polymer-free twist-spun multi-walled carbon nanotube (MWNT) yarns and average mechanical strengths of 1040 MPa were obtained for MWNT yarns infiltrated with 10 wt% polystyrene solution.

Structural model for dry-drawing of sheets and yarns from carbon nanotube forests.

A structural model is developed for describing the solid-state transformation of a vertically oriented carbon multiwall nanotube (MWNT) forest to a horizontally oriented MWNT sheet or yarn. The key element of our model is a network of individual carbon nanotubes or small bundles interconnecting the array of main large-diameter MWNT bundles of the forest. The dry-draw self-assembly mechanism for MWNT sheet formation involves two principal processes that reconfigure the interconnection network: (1) unzipping by preferentially peeling off interconnections between the bundles in the forest and (2) self-strengthening of these interconnections by densification at the top and bottom of the forest during draw-induced reorientation of the bundles.

Biscrolling nanotube sheets and functional guests into yarns.

Multifunctional applications of textiles have been limited by the inability to spin important materials into yarns. Generically applicable methods are demonstrated for producing weavable yarns comprising up to 95 weight percent of otherwise unspinnable particulate or nanofiber powders that remain highly functional. Scrolled 50-nanometer-thick carbon nanotube sheets confine these powders in the galleries of irregular scroll sacks whose observed complex structures are related to twist-dependent extension of Archimedean spirals, Fermat spirals, or spiral pairs into scrolls.

Template synthesis of ordered arrays of mesoporous titania spheres.

Three-dimensionally ordered arrays of submicron-sized mesoporous titania spheres with high surface area and high crystallinity have been prepared through triblock copolymer templating within the confinement of polymer inverse opals.

Harvesting waste thermal energy using a carbon-nanotube-based thermo-electrochemical cell.

Low efficiencies and costly electrode materials have limited harvesting of thermal energy as electrical energy using thermo-electrochemical cells (or "thermocells"). We demonstrate thermocells, in practical configurations (from coin cells to cells that can be wrapped around exhaust pipes), that harvest low-grade thermal energy using relatively inexpensive carbon multiwalled nanotube (MWNT) electrodes. These electrodes provide high electrochemically accessible surface areas and fast redox-mediated electron transfer, which significantly enhances thermocell current generation capacity and overall efficiency.

Giant-stroke, superelastic carbon nanotube aerogel muscles.

Improved electrically powered artificial muscles are needed for generating force, moving objects, and accomplishing work. Carbon nanotube aerogel sheets are the sole component of new artificial muscles that provide giant elongations and elongation rates of 220% and (3.7 x 10(4))% per second, respectively, at operating temperatures from 80 to 1900 kelvin.

Robust cell migration and neuronal growth on pristine carbon nanotube sheets and yarns.

Carbon nanotubes (CNTs) have unique chemical and physical properties anticipated to enable broad novel biomedical applications. Yet the question concerning their biocompatibility remains controversial. We recently reported a method for rapidly preparing strong, highly electrically conducting sheets and yarns from multi-walled CNTs.

Strong, transparent, multifunctional, carbon nanotube sheets.

Individual carbon nanotubes are like minute bits of string, and many trillions of these invisible strings must be assembled to make useful macroscopic articles. We demonstrated such assembly at rates above 7 meters per minute by cooperatively rotating carbon nanotubes in vertically oriented nanotube arrays (forests) and made 5-centimeter-wide, meter-long transparent sheets. These self-supporting nanotube sheets are initially formed as a highly anisotropic electronically conducting aerogel that can be densified into strong sheets that are as thin as 50 nanometers.

Carbon nanotubes--the route toward applications.

Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy.