3D oxygen vacancy distribution and defect-property relations in an oxide heterostructure.

Oxide heterostructures exhibit a vast variety of unique physical properties. Examples are unconventional superconductivity in layered nickelates and topological polar order in (PbTiO)/(SrTiO) superlattices. Although it is clear that variations in oxygen content are crucial for the electronic correlation phenomena in oxides, it remains a major challenge to quantify their impact.

Quantitative Mapping of Chemical Defects at Charged Grain Boundaries in a Ferroelectric Oxide.

Polar discontinuities, as well as compositional and structural changes at oxide interfaces can give rise to a large variety of electronic and ionic phenomena. In contrast to earlier work focused on domain walls and epitaxial systems, this work investigates the relation between polar discontinuities and the local chemistry at grain boundaries in polycrystalline ferroelectric ErMnO . Using orientation mapping and scanning probe microscopy (SPM) techniques, the polycrystalline material is demonstrated to develop charged grain boundaries with enhanced electronic conductance.

The Third Dimension of Ferroelectric Domain Walls.

Ferroelectric domain walls are quasi-2D systems that show great promise for the development of nonvolatile memory, memristor technology, and electronic components with ultrasmall feature size. Electric fields, for example, can change the domain wall orientation relative to the spontaneous polarization and switch between resistive and conductive states, controlling the electrical current. Being embedded in a 3D material, however, the domain walls are not perfectly flat and can form networks, which leads to complex physical structures.

Composition Analysis by STEM-EDX of Ternary Semiconductors by Internal References.

A practical method to determine the composition within ternary heterostructured semiconductor compounds using energy-dispersive X-ray spectroscopy in scanning transmission electron microscopy is presented. The method requires minimal external input factors such as user-determined or calculated sensitivity factors by incorporating a known compositional relationship, here a fixed stoichiometric ratio in III–V compound semiconductors. The method is demonstrated for three different systems; AlGaAs/GaAs, GaAsSb/GaAs, and InGaN/GaN with three different specimen geometries and compared to conventional quantification approaches.

Observation of Electric-Field-Induced Structural Dislocations in a Ferroelectric Oxide.

Dislocations are 1D topological defects with emergent electronic properties. Their low dimensionality and unique properties make them excellent candidates for innovative device concepts, ranging from dislocation-based neuromorphic memory to light emission from diodes. To date, dislocations are created in materials during synthesis via strain fields or flash sintering or retrospectively via deformation, for example, (nano)-indentation, limiting the technological possibilities.

Publisher Correction: Conductivity control via minimally invasive anti-Frenkel defects in a functional oxide.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Conductivity control via minimally invasive anti-Frenkel defects in a functional oxide.

Utilizing quantum effects in complex oxides, such as magnetism, multiferroicity and superconductivity, requires atomic-level control of the material's structure and composition. In contrast, the continuous conductivity changes that enable artificial oxide-based synapses and multiconfigurational devices are driven by redox reactions and domain reconfigurations, which entail long-range ionic migration and changes in stoichiometry or structure. Although both concepts hold great technological potential, combined applications seem difficult due to the mutually exclusive requirements.

Epitaxially grown III-arsenide-antimonide nanowires for optoelectronic applications.

Epitaxially grown ternary III-arsenide-antimonide (III-As-Sb) nanowires (NWs) are increasingly attracting attention due to their feasibility as a platform for the integration of largely lattice-mismatched antimonide-based heterostructures while preserving the high crystal quality. This and the inherent bandgap tuning flexibility of III-As-Sb in the near- and mid-infrared wavelength regions are important and auspicious premises for a variety of optoelectronic applications. In this review, we summarize the current understanding of the nucleation, morphology-change and crystal phase evolution of GaAsSb and InAsSb NWs and their characterization, especially in relation to Sb incorporation during growth.

Stabilisation of amorphous calcium phosphate in polyethylene glycol hydrogels.

Acellular polymer-calcium phosphate composites are promising bone graft materials. Hydrogels are suitable for providing a temporary matrix, while calcium phosphate minerals serve as ion depots for calcium and phosphate required for de novo bone formation. Crystalline calcium phosphates are stable under biological conditions and are commonly used in such scaffolds.

Single-Mode Near-Infrared Lasing in a GaAsSb-Based Nanowire Superlattice at Room Temperature.

Semiconductor nanowire lasers can produce guided coherent light emission with miniaturized geometry, bringing about new possibilities for a variety of applications including nanophotonic circuits, optical sensing, and on-chip and chip-to-chip optical communications. Here, we report on the realization of single-mode and room-temperature lasing from 890 to 990 nm, utilizing a novel design of single nanowires with GaAsSb-based multiple axial superlattices as a gain medium under optical pumping. The control of lasing wavelength via compositional tuning with excellent room-temperature lasing performance is shown to result from the unique nanowire structure with efficient gain material, which delivers a low lasing threshold of ∼6 kW/cm (75 μJ/cm per pulse), a lasing quality factor as high as 1250, and a high characteristic temperature of ∼129 K.

Vertically Oriented Growth of GaN Nanorods on Si Using Graphene as an Atomically Thin Buffer Layer.

The monolithic integration of wurtzite GaN on Si via metal-organic vapor phase epitaxy is strongly hampered by lattice and thermal mismatch as well as meltback etching. This study presents single-layer graphene as an atomically thin buffer layer for c-axis-oriented growth of vertically aligned GaN nanorods mediated by nanometer-sized AlGaN nucleation islands. Nanostructures of similar morphology are demonstrated on graphene-covered Si(111) as well as Si(100).

In Situ Heat-Induced Replacement of GaAs Nanowires by Au.

Here we report on the heat-induced solid-state replacement of GaAs by Au in nanowires. Such replacement of semiconductor nanowires by metals is envisioned as a method to achieve well-defined junctions within nanowires. To better understand the mechanisms and dynamics that govern the replacement reaction, we performed in situ heating studies using high-resolution scanning transmission electron microscopy.

New Insights into the Origins of Sb-Induced Effects on Self-Catalyzed GaAsSb Nanowire Arrays.

Ternary semiconductor nanowire arrays enable scalable fabrication of nano-optoelectronic devices with tunable bandgap. However, the lack of insight into the effects of the incorporation of Vy element results in lack of control on the growth of ternary III-V(1-y)Vy nanowires and hinders the development of high-performance nanowire devices based on such ternaries. Here, we report on the origins of Sb-induced effects affecting the morphology and crystal structure of self-catalyzed GaAsSb nanowire arrays.

Rectifying Single GaAsSb Nanowire Devices Based on Self-Induced Compositional Gradients.

Device configurations that enable a unidirectional propagation of carriers in a semiconductor are fundamental components for electronic and optoelectronic applications. To realize such devices, however, it is generally required to have complex processes to make p-n or Schottky junctions. Here we report on a unidirectional propagation effect due to a self-induced compositional variation in GaAsSb nanowires (NWs).

Rapid estimation of catalyst nanoparticle morphology and atomic-coordination by high-resolution Z-contrast electron microscopy.

Heterogeneous nanoparticle catalyst development relies on an understanding of their structure-property relationships, ideally at atomic resolution and in three-dimensions. Current transmission electron microscopy techniques such as discrete tomography can provide this but require multiple images of each nanoparticle and are incompatible with samples that change under electron irradiation or with surveying large numbers of particles to gain significant statistics. Here, we make use of recent advances in quantitative dark-field scanning transmission electron microscopy to count the number atoms in each atomic column of a single image from a platinum nanoparticle.

A story told by a single nanowire: optical properties of wurtzite GaAs.

The optical properties of the wurtzite (WZ) GaAs crystal phase found in nanowires (NWs) are a highly controversial topic. Here, we study high-quality pure WZ GaAs/AlGaAs core-shell NWs grown by Au-assisted molecular beam epitaxy (MBE) with microphotoluminescence spectroscopy (μ-PL) and (scanning) transmission electron microscopy on the very same single wire. We determine the room temperature (294 K) WZ GaAs bandgap to be 1.

Vertically aligned GaAs nanowires on graphite and few-layer graphene: generic model and epitaxial growth.

By utilizing the reduced contact area of nanowires, we show that epitaxial growth of a broad range of semiconductors on graphene can in principle be achieved. A generic atomic model is presented which describes the epitaxial growth configurations applicable to all conventional semiconductor materials. The model is experimentally verified by demonstrating the growth of vertically aligned GaAs nanowires on graphite and few-layer graphene by the self-catalyzed vapor-liquid-solid technique using molecular beam epitaxy.

Engineering parallel and perpendicular polarized photoluminescence from a single semiconductor nanowire by crystal phase control.

We report on a crystal phase-dependent photoluminescence (PL) polarization effect in individual wurtzite GaAs nanowires with a zinc blende GaAsSb insert grown by Au-assisted molecular beam epitaxy. The PL emission from the zinc blende GaAsSb insert is strongly polarized along the nanowire axis while the emission from the wurtzite GaAs nanowire is perpendicularly polarized. The results indicate that the crystal phases, through optical selection rules, are playing an important role in the alignment of the PL polarization in nanowires besides the linear polarization induced by the dielectric mismatch.

Easy route to superhydrophobic copper-based wire-guided droplet microfluidic systems.

Droplet-based microfluidic systems are an expansion of the lab on a chip concept toward flexible, reconfigurable setups based on the modification and analysis of individual droplets. Superhydrophobic surfaces are one suitable candidate for the realization of droplet-based microfluidic systems as the high mobility of aqueous liquids on such surfaces offers possibilities to use novel or more efficient approaches to droplet movement. Here, copper-based superhydrophobic surfaces were produced either by the etching of polycrystalline copper samples along the grain boundaries using etchants common in the microelectronics industry, by electrodeposition of copper films with subsequent nanowire decoration based on thermal oxidization, or by a combination of both.

Comparison of TEM specimen preparation of perovskite thin films by tripod polishing and conventional ion milling.

In this article, the effects of the transmission electron microscopy (TEM) specimen preparation techniques, such as ion milling and tripod polishing on perovskite oxides for high-resolution TEM investigation, are compared. Conventional and liquid nitrogen cooled ion milling induce a new domain orientation in thin films of SrRuO(3) and LaFeO(3) grown on (001)-oriented SrTiO(3) substrates. This is not observed in tripod-polished specimens.

PbTiO(3) nanorod arrays grown by self-assembly of nanocrystals.

Arrays of ferroelectric lead titanate (PbTiO(3)) nanorods have been grown on a substrate by a novel template-free method. Hydrothermal treatment of an amorphous PbTiO(3) precursor in the presence of a surfactant and PbTiO(3) or SrTiO(3) substrates resulted in the growth of PbTiO(3) nanorod arrays aligned perpendicular to the substrate surface. Two steps in the growth mechanism were demonstrated: first an epitaxial layer was formed on the substrate; this was followed by self-assembly of nanocrystals forming a mesocrystal layer which matured into arrays of PbTiO(3) nanorods.

Influence of volatile chlorides on the molten salt synthesis of ternary oxide nanorods and nanoparticles.

A molten salt synthesis route, previously reported to yield BaTiO3, PbTiO3, and Na2Ti6O13 nanorods, has been re-examined to elucidate the role of volatile chlorides. A precursor mixture containing barium (or lead) and titanium was annealed in the presence of NaCl at 760 or 820 degrees C. The main products were respectively isometric nanocrystalline BaTiO3 and PbTiO3.