Evaluation of the bonding strength of conventional, anatomized, adjustable, and CAD/CAM milled fiberglass posts in weakened endodontically treated roots.

This study evaluated the bond strength (BS) of conventional, anatomized, adjustable, and CAD/CAM fiberglass post systems. Forty maxillary canine roots were weakened, endodontically treated, and divided into four groups (n=10). A slice from each of the three sections (cervical, middle, apical) of the root canal was subjected to the push-out test and the failure pattern was subsequently analyzed.

Cone-beam computed tomographic evaluation of the root canal anatomy of the lower premolars and molars in a Brazilian sub-population.

Purpose: This study evaluated anatomical variations in the root canals of the lower premolars and molars in a Brazilian sub-population using cone-beam computed tomography (CBCT).

Materials And Methods: In total, 121 CBCT images of patients were selected from a database. All images contained lower first and second premolars and molars on both sides of the arch, fully developed roots, and no treatment, resorption, or calcifications.

Analysis of the mandibular molars root canals morphology. Study by computed tomography.

This study aimed to analyze the root and root canal morphology of mandibular first and second molars using CBCT images. A total of 2,400 mandibular molars exams were selected from 600 patients aged between 18 and 75 years. The number of roots, number of root canals, and root canal configuration according to the Vertucci classification were verified.

Guided endodontics of calcified canals: The drilling path of rotary systems and intracanal dentin wear.

This study evaluated the drilling path (mm) and the dentin wear (mm ) of two instruments used during guided endodontic access. Twenty mandibular incisors with calcified canals were selected using cone-beam computed tomography (CBCT) and fixed in articulated models. Preoperative CBCT scans were performed in combination with intraoral scanning, and the images were reconstructed in the Blue Sky Bio software for access planning and printing the guides.

An ultrasonic-based experimental model to evaluate the setting time of endodontic sealers.

Aim: To evaluate an ultrasonic-based experimental model (US), to assess the setting time of AH Plus , Bio-C Sealer and MTA Fillapex , and compare the results obtained with ANSI/ADA specifications (2012).

Methods: To determine the setting time according to the ANSI/ADA specification, moulds measuring 10 mm (diameter) × 2 mm (thickness) were used, and for the US tests a transducer (1 MHz) and an oscilloscope were used. Fourier-transform infrared spectroscopy (FTIR) was used to evaluate the changes on chemical structure at the different setting times found by the US and ANSI/ADA methods.

Detection of the internal anatomy of lower anterior teeth using cone-beam computed tomography.

Morphology study of root canal systems is essential for a correct diagnosis, therapy and prognosis of root canal treatment. This study aimed to analyse the dental anatomy of the lower anterior teeth, using cone-beam computed tomography (CBCT). Lower anterior teeth were classified in terms of type, number and location of root canals, evaluating the bilaterality of anatomical occurrences and determining whether the gender and age influence the findings.

Influence of endodontic sealers with different chemical compositions on bond strength of the resin cement/glass fiber post junction to root dentin.

Objective: This study evaluated the influence of endodontic sealers with different chemical compositions on bond strength of resin cement/glass fiber post junction to root dentin.

Materials And Methods: Seventy-two maxillary canines roots were instrumented with Reciproc (#R50) and distributed in 6 groups (n = 12) according to endodontic sealers: G1-control (no sealer); G2-Endofill; G3-Sealapex; G4-AH Plus; G5-Sealer Plus; G6-EndoSequence BC. The glass fiber post was cemented with Panavia F in 10 of the specimens.

Comparative effects of final canal irrigation with chitosan and EDTA.

Other: Chitosan is a natural, biocompatible chelating substance with potential for dental use. This study compared the effects of final canal irrigation with chitosan and EDTA on dentin microhardness, sealer dentin tubules penetration capacity, and push-out strength.

Methodology: Fifty canine roots were distributed according to the final irrigation protocol (n=10): G1- 15% EDTA with conventional irrigation; G2- 15% EDTA with Endovac; G3- 0.

Effect of a chitosan final rinse on the bond strength of root canal fillings.

This study was designed to evaluate the effect of a final rinse with 0.2% chitosan solution on the adhesion in roots filled with gutta percha and an epoxy resin based sealer. Thirty extracted human maxillary canines selected to ensure specimen standardization were used in the study.

Evaluation of the chelating effect of chitosan solubilized in different acids.

Aim: This study aimed to compare, through dentin microhardness and colorimetric analysis, the chelating effect of 0.2% chitosan solubilized in different acids.

Materials And Methods: The second and third cuts of the cervical region of maxillary central incisors were divided into four quadrants, resulting in eight specimens, which were treated with 50 μL of solution for 5 min according to their group ( = 10): GI - 0.

Analysis of the shelf life of chitosan stored in different types of packaging, using colorimetry and dentin microhardness.

Objectives: Chitosan has been widely investigated and used. However, the literature does not refer to the shelf life of this solution. This study evaluated, through the colorimetric titration technique and an analysis of dentin micro-hardness, the shelf life of 0.

Idiopathic external apical root resorption: clinical report of 2 cases.

External root resorptions are characterized by progressive destruction of hard tissue due to clastic activity. This article reports 2 cases that involved the nonsurgical treatment of mandibular molars with idiopathic external root resorption. In the first case, clinical and radiographic examination showed irreversible inflammation of the pulp tissue and resorption of the distal root.

Geminated Maxillary Lateral Incisor with Two Root Canals.

This paper reports a case of gemination in a maxillary lateral incisor with two root canals and crown-root dilaceration. A 16-year-old male patient was referred for endodontic treatment of the maxillary left lateral incisor and evaluation of esthetic and functional complaints in the anterior region. The patient reported trauma to the anterior primary teeth.

Morphological Study and Analysis of Microhardness and Permeability of the Furcation of Maxillary Premolars.

The morphology, microhardness and dentin permeability of the furcation region of maxillary premolars were evaluated. Ten premolars were cut lengthwise and the furcation region was delimited. In one group (n=10) microhardness was measured in the buccal, central and palatal regions, in the outer middle and inner layers of the furcation, and in the buccal and palatal regions adjacent to the furcation.

Drying protocol influence on the bond strength and apical sealing of three different endodontic sealers.

The aim of this study was to evaluate the influence of drying protocols (DP) on the apical sealing (AS) and on the bond strength (BS) of teeth filled with different sealers. The root canals of one hundred and fifty-six roots of maxillary canines were prepared with Reciproc rotary files (R50). The teeth were randomly divided into four groups (n = 39), according to the DP: GI-paper points; GII-70% isopropyl alcohol + aspiration with NaviTip points; GIII-95% ethanol + paper points; GIV-EndoVac + paper points.

Root filling bond strength using reciprocating file-matched single-cones with different sealers.

The aim of the present study was to evaluate the bond strength (BS) of root canal fillings to root dentin using the reciprocating file-matched single-cone or lateral compaction techniques with resin-based and calcium-silicate-based sealers. Maxillary canine roots were prepared and filled using one of the following approaches: Reciproc R40 file and R40 single cone, WaveOne Large file and Large single cone, or ProTaper up to F4 file with lateral compaction. The root filling was performed using AH Plus, Epiphany SE or MTA Fillapex (n = 10).

Volume of sealer in the apical region of teeth filled by different techniques: a micro-CT analysis.

The volume of sealer in the apical 1 mm of teeth filled using different techniques was evaluated by micro-commuted tomography (micro-CT). Sixty-four maxillary central incisors were prepared using NiTi rotary instruments. Teeth were randomly distributed into four groups according to root canal sealers (AH Plus, Endofill, Sealapex, and Sealer 26) and subdivided into two subgroups according to the filling techniques (active and passive lateral condensation; n = 8 each).

The radix entomolaris and paramolaris: a micro-computed tomographic study of 3-rooted mandibular first molars.

Introduction: The morphology of the supernumerary third root (radix) in mandibular first molars was examined by micro-computed tomography (μCT) scanning.

Methods: Nineteen permanent mandibular first molars with radix were scanned in a μCT device to evaluate their morphology with respect to root length, root curvature direction, location of radix, apical foramen, accessory canals and apical deltas, and distance between canal orifices as well as 2- and 3-dimensional parameters of the canals (number, area, roundness, major/minor diameter, volume, surface area, and structure model index). Quantitative data were analyzed by 1-way analysis of variance and the Tukey test (α = 0.

Morphology and microhardness of dentin at the furcation area of mandibular molars.

Introduction: This study evaluated dentin morphology and microhardness at the furcation area of mandibular molars.

Methods: Tooth segments of mandibular molars were embedded in resin blocks and bisected longitudinally (n = 20), and the furcation area was delimited by tracing 2 orthogonal lines from the most concave point of the outer surface of the furcation toward the mesial and distal canal entrances. In half of the specimens, Knoop microhardness was measured in 2 directions in the furcation area: vertically, parallel to the orthogonal lines and the bisector of the angle formed by them; and horizontally, in the outer (close to the pulp chamber floor), inner (close to the cementum), and middle dentin layers.

Three independent mesial canals in a mandibular molar: four-year followup of a case using cone beam computed tomography.

Endodontic treatment of mandibular molars is challenging because of variable root canal morphology. The nonsurgical endodontic management of a mandibular first molar presenting an independent middle mesial canal is reported. After coronal access, additional clinical inspection of the mesial canals' orifices and their interconnecting groove using an endodontic explorer and 4.

Artefacts in Cone Beam CT Mimicking an Extrapalatal Canal of Root-Filled Maxillary Molar.

Despite the advantages of cone-beam computed tomography (CBCT), the images provided by this diagnostic tool can produce artifacts and compromise accurate diagnostic assessment. This paper describes an endodontic treatment of a maxillary molar where CBCT images suggested the presence of a nonexistent third root canal in the palatal root. An endodontic treatment was performed in a first maxillary molar with palatal canals, and the tooth was restored with a cast metal crown.

Effect of sodium hypochlorite and EDTA irrigation, individually and in alternation, on dentin microhardness at the furcation area of mandibular molars.

The aim of this study was to evaluate the effect of irrigation regimens on dentin microhardness at the furcation area of mandibular molars, using sodium hypochlorite and ethylenediaminetetraacetic acid (EDTA), individually and in alternation. The occlusal surface and the roots of 20 non-carious extracted human permanent mandibular molars were cut transversally and discarded. The tooth blocks were embedded in acrylic resin and randomly assigned to 4 groups (n=5) according to the irrigating regimens: 1% NaOCl solution, 17% EDTA solution, 1% NaOCl and 17% EDTA and distilled water (control).

Time-dependent effects of chitosan on dentin structures.

Complete debridement with smear layer removal are essential measures for achieving a successful outcome of root canal treatment. The aim of this study was to evaluate the effects of chitosan at different concentrations on the removal of the smear layer and on dentin structure after 3 and 5 min of application. Twelve recently extracted maxillary canine teeth were instrumented using the crown-down technique and irrigated with 1% sodium hypochlorite.

Chitosan: effect of a new chelating agent on the microhardness of root dentin.

The effect of solutions of 0.2% chitosan, 15% EDTA and 10% citric acid on the microhardness of root dentin was evaluated comparatively in this study. Thirteen sound human maxillary central incisors were selected and decoronated at the cementoenamel junction.

Conventional Treatment of Maxillary Incisor Type III Dens Invaginatus with Periapical Lesion: A Case Report.

Dens invaginatus is a developmental dental anomaly clinically characterized by a palatine furrow that can be limited to the coronal pulp or may extend to the radicular apex. The purpose of this paper was to present a clinical case of type III dens invaginatus, identified on the maxillary right central incisor in anterior periapical radiographs, in which the tooth was submitted to conventional endodontic treatment. The results obtained after five years of clinical and radiographic followup demonstrated that conventional endodontic treatment is a clinically viable alternative in cases of type III dens invaginatus.