Microstructure characterization and mechanistic insight into polyether polyols and their associated polyurethanes.

This article reviews the analytical tool chest used for characterizing alkoxylates and their associated copolymer mixtures. Specific emphasis will be placed upon the use of mass spectrometry-based techniques as rapid characterization tools for optimizing reaction processes in an industrial R&D setting. An initial tutorial will cover the use of matrix-assisted laser desorption/ionization-mass spectrometry and tandem mass spectrometry fragmentation for detailed component analysis (e.

Dual Polymerization Pathway for Polyolefin-Polar Block Copolymer Synthesis via MILRad: Mechanism and Scope.

This work explores the mechanism whereby a cationic diimine Pd(II) complex combines coordination insertion and radical polymerization to form polyolefin-polar block copolymers. The initial requirement involves the insertion of a single acrylate monomer into the Pd(II)-polyolefin intermediates, which generate a stable polymeric chelate through a chain-walking mechanism. This thermodynamically stable chelate was also found to be photochemically inactive, and a unique mechanism was discovered which allows for radical polymerization.

Polyolefin Analyses with a 10 mm Multinuclear NMR Cryoprobe.

Polyolefins are important and broadly used materials. Their molecular microstructures have direct impact on macroscopic properties and dictate end-use applications. C NMR is a powerful analytical technique used to characterize polyolefin microstructures, such as long-chain branching (LCB), but it suffers from low sensitivity.

Characterization of microstructures and reaction mechanisms of Tröger's base polymers of intrinsic microporosity.

Rationale: Tröger's base polymers of intrinsic microporosity (PIMs) are receiving increasing attention for applications such as polymer molecular sieve membranes. Development of novel membrane materials requires microstructure analysis in order to overcome processing and applications challenges. This study aims to address these challenges and overcome some of the solubility/aggregation issues that hinder the analysis of these materials.

MALDI-TOF/TOF CID Study of Poly(1,4-dihydroxybenzene terephthalate) Fragmentation Reactions.

MALDI-TOF/TOF collision-induced dissociation (CID) experiments were conducted on model aromatic polyester oligomers. CID fragmentation studies identified initial fracture of the ester bond and subsequent CO loss as a major pathway, consistent with the general fragmentation mechanism used to explain the origin of poly(p-phenylenediamine terephthalamide) (PPD-T) fragment ions. Specifically, both charge-remote and charge-site fragmentation were observed.

Collision induced dissociation study of ester-based polyurethane fragmentation reactions.

A combination of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) collision induced dissociation (CID) and ion mobility separations (IMS) was used to study a complex mixture composed of unreacted polyester starting material (polybutylene adipate) and polyurethane (PUR) end products. Collision induced dissociation fragmentation identified two primary fragmentation mechanisms of PURs, which were used to generate a general fragmentation model. Predicted fragment ions were used to distinguish: (1) linear and cyclic PURs, (2) hard-block and soft-block PURS, (3) the degree of "blockiness" within hard- and soft-block PURs, (4) the location of the MDI linkages within each PUR chain, and (5) the relative intensities of various isobars intermingled within a precursor mass peak.

Matrix-assisted laser desorption/ionization-time-of-flight/time-of-flight collision-induced dissociation study of poly(p-phenylenediamine terephthalamide) fragmentation reactions.

MALDI-TOF/TOF collision-induced dissociation (CID) experiments are reported on model poly(p-phenylenediamine terephthalamide) (PPD-T) polymers, revealing a variety of synthesis reaction products. Diamine-terminated oligomers were the major product of synthesis using excess amine, and di-carboxylic acid oligomers were the major product for excess acid. Structures of major reaction products were confirmed by CID fragmentation studies, along with detailed studies of MS/MS decomposition pathways.

MALDI-TOF MS stability study of model poly(p-phenylene terephthalamide)s.

In the present study, we address the possibility of matrix-assisted laser desorption/ionization (MALDI)-time-of-flight MS analysis-induced chain fragmentation in poly(p-phenylene terephthalamide) (PPD-T) by considering two possible sources: (1) grinding-induced fragmentation resulting from the evaporation-grinding MALDI sample preparation method (E-G method) and (2) in-source/metastable fragmentation induced by the MALDI laser. An analysis of variance (ANOVA) statistical study found, with a high probability, that obtaining MALDI spectra with the effective laser area as large as possible (the "fanned-out" setting) did not cause any chain fragmentation due to the E-G MALDI sample preparation method, even when three additional grinding steps were used. However, the effect of laser fluence was less clear.

MALDI-TOF/TOF CID study of poly(alpha-methylstyrene) fragmentation reactions.

MALDI-TOF/TOF CID experiments are reported for hydroxylated poly(alpha-methylstyrene) precursor ions (PAMS: m/z 1,445.9 (n = 10), 2,036.3 (n = 15), 2,626.

MALDI-TOF/TOF CID study of 4-alkyl-substituted polystyrene fragmentation reactions.

MALDI-TOF/TOF CID experiments were conducted on a variety of hydrogen-terminated poly(4-methylstyrene), hydroxylated poly(t-butylstyrene), and polystyrene precursor ions: n = 10, 15, 20, 25, and 30, where the number of repeat units n corresponds to the oligomer mass number. The influences of structure, molecular weight, and effective collision kinetic energy on degradation mechanisms were examined to test the generality of our multi-chain fragmentation model developed for polystyrene. Each depolymerization mechanism is presented in detail with experimental and computational data to justify/rationalize its occurrence and effective kinetic energy dependence.

Electrospray mass spectrometry study of tiopronin monolayer-protected gold nanoclusters.

Electrospray ionization time-of-flight mass spectrometry (ESI-TOF MS) and gel permeation chromatography (GPC) were used to study the synthesis of a series of tiopronin monolayer-protected gold nanoclusters (MPCs) and to monitor their postsynthesis peptide ligand place-exchange reactions. All mass spectra identified the presence of cyclic gold(I)-thiolates with a strong preference for tetrameric species. During the synthesis of pre-monolayer-protected nanoclusters (pre-MPCs), esterified gold(I)-thiolate tetramers were initially observed in minor abundance (with respect to disulfide bridged tiopronin species) before dramatically increasing in abundance and precipitating from solution.

Universal polyethylene glycol linkers for attaching receptor ligands to quantum dots.

Biologically active small molecule derivatives that can be conjugated to quantum dots have the promise of revolutionizing fluorescent imaging in biology. In order to achieve this several technical hurdles have to be surmounted, one of which is non-specific adsorption of quantum dots to cell membranes. Pegylating quantum dots has been shown to eliminate non-specific binding.

A MALDI-TOF MS study of oligomeric poly(m-phenyleneisophthalamide).

MALDI-TOF MS was used to study the end-group distribution of a series of poly(m-phenyleneisophthalamide) oligomers which were synthesized using various mole percent ratios of diamine to diacid chloride (90:10, 80:20, 70:30, 60:40, 50:50, 40:60, 30:70, 20:80, and 10:90) to clarify results obtained in previous work published in this journal. Oligomers synthesized with excess diamine or excess diacid chloride were found to contain abundances of amine or carboxylate end groups, respectively, as expected. Oligomers synthesized with equal molar ratios of reactants produced cyclic species which were also found in a previous publication as an oligomer in commercially produced, high molecular mass Nomex.

A technique for obtaining matrix-assisted laser desorption/ionization time-of-flight mass spectra of poorly soluble and insoluble aromatic polyamides.

Wet grinding methods for obtaining matrix-assisted laser desorption/ionization time-of-flight mass spectra of poorly soluble and insoluble low molecular mass oligomers (<4600 Da) of Nomex and Kevlar are described. Optimum conditions for sample preparation are given along with a detailed analysis of the spectra obtained. Two matrix materials were employed in this analysis, 1,8-dihydroxyanthrone (dithranol) and 3-aminoquinoline with potassium trifluoroacetate used as the cationizing agent.

Characterization of an insoluble polyimide oligomer by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

In the past two years, papers have appeared in the literature which demonstrate that matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectra can be obtained from matrix-analyte preparations which have been produced by grinding the two materials together until a powder of small particle size is obtained. In the present study that methodology was modified and applied to an insoluble polyimide oligomer, poly(4,4'-oxydiphenylenepyromellitimide) (POPM). Two matrix materials were employed in this analysis, 1,8 dihydroxyanthrone (dithranol) and 3-aminoquinoline, with and without an additional cationizing agent.