A supervised machine learning tool to predict the bactericidal efficiency of nanostructured surface.

The emergence and rapid spread of multidrug-resistant bacterial strains is a growing concern of public health. Inspired by the natural bactericidal surfaces of lotus leaves and shark skin, increasing attention has been focused on the use of mechano-bactericidal methods to create surfaces with antibacterial and/or bactericidal effects. There have been several studies exploring the bactericidal effect of nanostructured surfaces under various combinations of parameters.

Cleaner and Sustainable Production of Core-Sheath Polymer Fibres.

The amalgamation of sustainable practises throughout the fabrication process with advanced material engineering holds promise not only for eco-conscious manufacturing but also for promoting technological advancements in versatile material design and application. Moreover, technological innovation serves as a catalyst for sustainability initiatives, driving innovation and enabling the adoption of greener practises across industries. This study investigates redefining the production protocol of pressure spinning to produce core-sheath polymer fibres, deepening sustainable practises.

Generating Lifetime-Enhanced Microbubbles by Decorating Shells with Silicon Quantum Nano-Dots Using a 3-Series T-Junction Microfluidic Device.

Long-term stability of microbubbles is crucial to their effectiveness. Using a new microfluidic device connecting three T-junction channels of 100 μm in series, stable monodisperse SiQD-loaded bovine serum albumin (BSA) protein microbubbles down to 22.8 ± 1.

Metformin-Loaded Polymer-Based Microbubbles/Nanoparticles Generated for the Treatment of Type 2 Diabetes Mellitus.

Type 2 diabetes mellitus (T2DM) is a chronic metabolic disease that is increasingly common all over the world with a high risk of progressive hyperglycemia and high microvascular and macrovascular complications. The currently used drugs in the treatment of T2DM have insufficient glucose control and can carry detrimental side effects. Several drug delivery systems have been investigated to decrease the side effects and frequency of dosage, and also to increase the effect of oral antidiabetic drugs.

Videographic Analysis of Blink Dynamics following Upper Eyelid Blepharoplasty and Its Association with Dry Eye.

Unlabelled: This study was undertaken to characterize the effects of upper eyelid blepharoplasty on blink dynamics and to evaluate the hypothesis that changes in blink dynamics following blepharoplasty are associated with postoperative dry eye.

Methods: The voluntary blink of 14 eyes of 7 patients with dermatochalasis undergoing upper eyelid blepharoplasty was recorded with a high-speed camera preoperatively and 6-8 months postoperatively, alongside a group of 11 controls. The images were analyzed for palpebral aperture, blink duration, and maximum velocity during opening and closing phases.

Copolymer Composition and Nanoparticle Configuration Enhance in vitro Drug Release Behavior of Poorly Water-soluble Progesterone for Oral Formulations.

Hypothesis: Developing oral formulations to enable effective release of poorly water-soluble drugs like progesterone is a major challenge in pharmaceutics. Coaxial electrospray can generate drug-loaded nanoparticles of strategic compositions and configurations to enhance physiological dissolution and bioavailability of poorly water-soluble drug progesterone.

Experiments: Six formulations comprising nanoparticles encapsulating progesterone in different poly(lactide-co-glycolide) (PLGA) matrix configurations and compositions were fabricated and characterized in terms of morphology, molecular crystallinity, drug encapsulation efficiency and release behavior.

A Portable Device for the Generation of Drug-Loaded Three-Compartmental Fibers Containing Metronidazole and Iodine for Topical Application.

The use of combination therapies for the treatment of a range of conditions is now well established, with the component drugs usually being delivered either as distinct medicaments or combination products that contain physical mixes of the two active ingredients. There is, however, a compelling argument for the development of compartmentalised systems whereby the release, stability and incorporation environment of the different drugs may be tailored. Here we outline the development of polymeric fine fiber systems whereby two drugs used for the treatment of wounds may be separately incorporated.

Empirical modelling and optimization of pressure-coupled infusion gyration parameters for the nanofibre fabrication.

Pressure-coupled infusion gyration (PCIG) is a novel promising technique for economical and effective mass production of nanofibres with desirable geometrical characteristics. The average diameter of spun fibres significantly influences the structural, mechanical and physical properties of the produced fibre mats. Having a comprehensive understanding of the significant effects of PCIG experimental variables on the spun fibres is beneficial.

Novel Preparation of Monodisperse Microbubbles by Integrating Oscillating Electric Fields with Microfluidics.

Microbubbles generated by microfluidic techniques have gained substantial interest in various industries such as cosmetics, food engineering, and the biomedical field. The microfluidic T-junction provides exquisite control over processing parameters, however, it relies on pressure driven flows only; therefore, bubble size variation is limited especially for viscous solutions. A novel set-up to superimpose an alternating current (AC) oscillation onto a direct current (DC) field is invented in this work, capitalising on the possibility to excite bubble resonance phenomenon and properties, and introducing relevant parameters such as frequency, AC voltage, and waveform to further control bubble size.

Process Modeling for the Fiber Diameter of Polymer, Spun by Pressure-Coupled Infusion Gyration.

Several new spinning methods have been developed recently to mass produce polymeric fibers. Pressure-coupled infusion gyration is one of them. Because the fiber diameter plays a pivotal role for the mechanical, electrical, and optical properties of the produced fiber mats, in this work, polyethylene oxide is used as a model polymer, and the processing parameters including polymer concentration, infusion (flow) rate, working pressure, and rotational speed are chosen as variables to control fiber diameters spanning the micro- to nanoscale.

Electrohydrodynamic fabrication of core-shell PLGA nanoparticles with controlled release of cisplatin for enhanced cancer treatment.

Increasing the clinical efficacy of toxic chemotherapy drugs such as cisplatin (CDDP), via targeted drug delivery, is a key area of research in cancer treatment. In this study, CDDP-loaded poly(lactic-co-glycolic acid) (PLGA) polymeric nanoparticles (NPs) were successfully prepared using electrohydrodynamic atomization (EHDA). The configuration was varied to control the distribution of CDDP within the particles, and high encapsulation efficiency (>70%) of the drug was achieved.

Electrosprayed nanoparticle delivery system for controlled release.

This study utilises an electrohydrodynamic technique to prepare core-shell lipid nanoparticles with a tunable size and high active ingredient loading capacity, encapsulation efficiency and controlled release. Using stearic acid and ethylvanillin as model shell and active ingredients respectively, we identify the processing conditions and ratios of lipid:ethylvanillin required to form nanoparticles. Nanoparticles with a mean size ranging from 60 to 70nm at the rate of 1.

Electrohydrodynamic encapsulation of cisplatin in poly (lactic-co-glycolic acid) nanoparticles for controlled drug delivery.

Targeted delivery of potent, toxic chemotherapy drugs, such as cisplatin, is a significant area of research in cancer treatment. In this study, cisplatin was successfully encapsulated with high efficiency (>70%) in poly (lactic-co-glycolic acid) polymeric nanoparticles by using electrohydrodynamic atomization (EHDA) where applied voltage and solution flow rate as well as the concentration of cisplatin and polymer were varied to control the size of the particles. Thus, nanoparticles were produced with three different drug:polymer ratios (2.

Analysis of blink dynamics in patients with blepharoptosis.

Owing to the rapid movements of the human upper eyelid, a high-speed camera was used to record and characterize voluntary blinking and the blink dynamics of blepharoptosis patients were compared to a control group. Twenty-six blepharoptosis patients prior to surgery and 45 control subjects were studied and the vertical height of the palpebral aperture (PA) was measured manually at 2 ms intervals during each blink cycle. The PA and blinking speed were plotted with respect to time and a predictive model was generated.

Bistable collective behavior of polymers tethered in a nanopore.

Polymer-coated pores play a crucial role in nucleo-cytoplasmic transport and in a number of biomimetic and nanotechnological applications. Here we present Monte Carlo and Density Functional Theory approaches to identify different collective phases of end-grafted polymers in a nanopore and to study their relative stability as a function of intermolecular interactions. Over a range of system parameters that is relevant for nuclear pore complexes, we observe two distinct phases: one with the bulk of the polymers condensed at the wall of the pore, and the other with the polymers condensed along its central axis.

System among the corticosteroids: specificity and molecular dynamics.

Understanding how structural features determine specific biological activities has often proved elusive. With over 161,000 steroid structures described, an algorithm able to predict activity from structural attributes would provide manifest benefits. Molecular simulations of a range of 35 corticosteroids show striking correlations between conformational mobility and biological specificity.