Surface-Enriched Boron-Doped TiO Nanoparticles as Photocatalysts for Propene Oxidation.

A series of nanostructured boron-TiO photocatalysts (B--TiO-) were prepared by sol-gel synthesis using titanium tetraisopropoxide and boric acid. The effects of the synthesis variables, boric acid amount () and crystallization temperature (), on structural and electronic properties and on the photocatalytic performance for propene oxidation, are studied. This reaction accounts for the remediation of pollution caused by volatile organic compounds, and it is carried out at low concentrations, a case in which efficient removal techniques are difficult and costly to implement.

Intrinsic and selective activity of functionalized carbon nanotube/nanocellulose platforms against colon cancer cells.

Given their large surface area and versatile chemical reactivity, single-walled carbon nanotubes (SWCNTs) are regarded as the basis of new pharmacological complexes. In this study, SWCNTs are chemically functionalized with fluorescein, folic acid, and capecitabine, a drug that is commonly used against colorectal cancer. These functionalized SWCNTs are dispersed in water by taking advantage of their synergistic interaction with type-II nanocrystalline cellulose (II-NCC), and the resulting colloidal system is tested in vitro on both normal (differentiated) and cancerous (proliferative) human colon cells (Caco-2).

Waterborne Graphene- and Nanocellulose-Based Inks for Functional Conductive Films and 3D Structures.

In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario.

Carbon Nanotube Film Electrodes with Acrylic Additives: Blocking Electrochemical Charge Transfer Reactions.

Carbon nanotubes (CNTs) processed into conductive films by liquid phase deposition technologies reveal increasing interest as electrode components in electrochemical device platforms for sensing and energy storage applications. In this work we show that the addition of acrylic latex to water-based CNT inks not only favors the fabrication of stable and robust flexible electrodes on plastic substrates but, moreover, sensitively enables the control of their electrical and electrochemical transport properties. Importantly, within a given concentration range, the acrylic additive in the films, being used as working electrodes, effectively blocks undesired faradaic transfer reactions across the electrode-electrolyte interface while maintaining their capacitance response as probed in a three-electrode electrochemical device configuration.

The viscosity of dilute carbon nanotube (1D) and graphene oxide (2D) nanofluids.

Controlling the physicochemical properties of nanoparticles in fluids directly impacts on their liquid phase processing and applications in nanofluidics, thermal engineering, biomedicine and printed electronics. In this work, the temperature dependent viscosity of various aqueous nanofluids containing carbon nanotubes (CNTs) or graphene oxide (GO), i.e.

Differential properties and effects of fluorescent carbon nanoparticles towards intestinal theranostics.

Given the potential applications of fluorescent carbon nanoparticles in biomedicine, the relationship between their chemical structure, optical properties and biocompatibility has to be investigated in detail. In this work, different types of fluorescent carbon nanoparticles are synthesized by acid treatment, sonochemical treatment, electrochemical cleavage and polycondensation. The particle size ranges from 1 to 6 nm, depending on the synthesis method.

Chemical Postdeposition Treatments To Improve the Adhesion of Carbon Nanotube Films on Plastic Substrates.

The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO) and -methyl pyrrolidone.

Unique Properties and Behavior of Nonmercerized Type-II Cellulose Nanocrystals as Carbon Nanotube Biocompatible Dispersants.

Nanocellulose is increasingly being investigated as a paradigm of a sustainable nanomaterial because of its extraordinary physical and chemical properties, together with its renewable nature and worldwide abundance. The rich structural diversity of cellulose materials is represented by different crystalline allomorphs, from which types I and II stand out. While type I is naturally and ubiquitously present, type II is man-made and requires harsh and caustic synthesis conditions such as the so-called mercerization process.

Capacitive and Charge Transfer Effects of Single-Walled Carbon Nanotubes in TiO Electrodes.

The transfer of nanoscale properties from single-walled carbon nanotubes (SWCNTs) to macroscopic systems is a topic of intense research. In particular, inorganic composites of SWCNTs and metal oxide semiconductors are being investigated for applications in electronics, energy devices, photocatalysis, and electroanalysis. In this work, a commercial SWCNT material is separated into fractions containing different conformations.

A tool box to ascertain the nature of doping and photoresponse in single-walled carbon nanotubes.

The effect of doping on the electronic properties in bulk single-walled carbon nanotube (SWCNT) samples is studied for the first time using a new in situ Raman spectroelectrochemical method, and further verified by DFT calculations and photoresponse. We use p-/n-doped SWCNTs prepared by diazonium reactions as a versatile chemical strategy to control the SWCNT behavior. The measured and calculated data testify an acceptor effect of 4-aminobenzenesulfonic acid (p-doping), and a donor effect (n-doping) in the case of benzyl alcohol.

In-vitro toxicity of carbon nanotube/polylysine colloids to colon cancer cells.

Single-walled carbon nanotubes (SWCNTs) are thoroughly purified and dispersed in an aqueous solution of high molecular weight poly-L-lysine (pLlys). Human intestinal epithelial Caco-2/TC7 cells are incubated with the SWCNT dispersions in pLlys, and their effects on cell viability are studied by image flow cytometry. No significant changes are observed in the cell culture wells up to pLlys concentrations of 10 μg ml.

Covalent functionalization of single-walled carbon nanotubes with polytyrosine: Characterization and analytical applications for the sensitive quantification of polyphenols.

This work reports the synthesis and characterization of single-walled carbon nanotubes (SWCNT) covalently functionalized with polytyrosine (Polytyr); the critical analysis of the experimental conditions to obtain the efficient dispersion of the modified carbon nanotubes; and the analytical performance of glassy carbon electrodes (GCE) modified with the dispersion (GCE/SWCNT-Polytyr) for the highly sensitive quantification of polyphenols. Under the optimal conditions, the calibration plot for the amperometric response of gallic acid (GA) shows a linear range between 5.0 × 10(-7) and 1.

Peptide-based biomaterials. Linking l-tyrosine and poly l-tyrosine to graphene oxide nanoribbons.

Peptide-based biomaterials are being studied actively in a variety of applications in materials science and biointerface engineering. Likewise, there has been ongoing exploration over the last few decades into the potential biological applications of carbon nanomaterials, motivated by their size, shape, structure and their unique physical and chemical properties. In recent years, the functionalization of carbon nanotubes and graphene has led to the preparation of bioactive carbon nanomaterials that are being used in biomedicine as structural elements and in gene therapy and biosensing.

Single-walled carbon nanotubes (SWCNTs) enhance KCl-, acetylcholine-, and serotonin-induced contractions and evoke oxidative stress on rabbit ileum.

We examined the effects of intravenous administration of purified arc-discharge single-walled carbon nanotubes (SWCNTs) on rabbit ileum to establish the possibility of using these SWCNTs as cell markers or drug carriers for the treatment of intestinal diseases. The SWCNT purification process eliminated carbonaceous impurities and decreased the amount of metals. SWCNTs increased the contractile responses induced by KCl, acetylcholine (ACh), and serotonin (5-HT) in rabbit ileum.

Study of neuron survival on polypyrrole-embedded single-walled carbon nanotube substrates for long-term growth conditions.

Cultures of primary embryonic rat brain hippocampus neurons with supporting glia cells were carried out on different substrates containing polypyrrole (PPy) and/or single-walled carbon nanotubes (SWCNTs). Neuron adhesion, neurites and dendrites branching elongation, and development of neuron networks on substrates were followed by phase-contrast optical microscopy and quantified to state cell survival and proliferation. Suspensions of as-grown and purified SWCNTs were sprayed on a glass coverslips and PPy/SWCNTs were deposited by potentiodynamic electrochemical deposition.

A chemically reactive spinning dope for significant improvements in wet spun carbon nanotube fibres.

Single-walled carbon nanotubes can be spun in a polyvinyl alcohol stream to produce nanocomposite fibres. We use a facile ester linking between both elements to create improved fibres which exhibit outstanding enhancements in the absence of post-processing stages, providing a promising alternative based on a chemical method.

Reactive fillers based on SWCNTs functionalized with matrix-based moieties for the production of epoxy composites with superior and tunable properties.

Composite materials based on epoxy matrix and single-walled carbon nanotubes (SWCNTs) are able to exhibit outstanding improvements in physical properties when using a tailored covalent functionalization with matrix-based moieties containing terminal amines or epoxide rings. The proper choice of grafted moiety and integration protocol makes it feasible to tune the composite physical properties. At 0.

Tailored SWCNT functionalization optimized for compatibility with epoxy matrices.

We have modified single walled carbon nanotubes (SWCNTs) with well defined matrix-based architectures to improve interface interaction in SWCNT/epoxy composites. The hardener and two pre-synthesized oligomers containing epoxy and hardener moieties were covalently attached to the SWCNT walls by in situ diazonium or carboxylic coupling reactions. In this way, SWCNTs bearing amine or epoxide-terminated fragments of different molecular weights, which resemble the chemical structure of the cured resin, were synthesized.

High NIR-purity index single-walled carbon nanotubes for electrochemical sensing in microfluidic chips.

Single-walled carbon nanotubes (SWCNTs) should constitute an important natural step towards the improvement of the analytical performance of microfluidic electrochemical sensing. SWCNTs inherently offer lower detection potentials, higher surfaces and better stability than the existing carbon electrodes. However, pristine SWCNTs contain some carbonaceous and metallic impurities that influence their electrochemical performance.

Influence of air oxidation on the surfactant-assisted purification of single-walled carbon nanotubes.

Arc discharge single-walled carbon nanotube (SWCNT) soot was treated under different experimental conditions including gas- and liquid-phase oxidation, heat treatment in an inert gas, and hydrogen gasification. Afterward, the samples were dispersed in a surfactant and centrifuged at a moderately high speed. Near-infrared spectra of all the dispersions were compared with that of raw SWCNT soot.

Solvent-free preparation of high-toughness epoxy--SWNT composite materials.

Multicomponent nanocomposite materials based on a high-performance epoxy system and single-walled carbon nanotubes (SWNTs) have been prepared. The noncovalent wrapping of nitric acid-treated SWNTs with a PEO-based amphiphilic block copolymer leads to a highly disaggregated filler with a boosted miscibility in the epoxy matrix, allowing its dispersion without organic solvents. Although direct dispersion of acid-treated SWNTs results in modestly improved epoxy matrix mechanical properties, the incorporation of wrapped SWNTs produces a huge increase in toughness (276% improvement at 0.