Correction: Bond breaking of furan-maleimide adducts a diradical sequential mechanism under an external mechanical force.

[This corrects the article DOI: 10.1039/D2SC05051J.].

Bond breaking of furan-maleimide adducts a diradical sequential mechanism under an external mechanical force.

Substituted furan-maleimide Diels-Alder adducts are bound by dynamic covalent bonds that make them particularly attractive mechanophores. Thermally activated [4 + 2] retro-Diels-Alder (DA) reactions predominantly proceed a concerted mechanism in the ground electronic state. We show that an asymmetric mechanical force along the anchoring bonds in both the and isomers of proximal dimethyl furan-maleimide adducts favors a sequential pathway.

Radical-Pairing Interactions in a Molecular Switch Evidenced by Ion Mobility Spectrometry and Infrared Ion Spectroscopy.

The digital revolution sets a milestone in the progressive miniaturization of working devices and in the underlying advent of molecular machines. Foldamers involving mechanically entangled components with modular secondary structures are among the most promising designs for molecular switch-based applications. Characterizing the nature and dynamics of their intramolecular network following the application of a stimulus is the key to their performance.

Real-Time Fluctuations in Single-Molecule Rotaxane Experiments Reveal an Intermediate Weak Binding State during Shuttling.

We report on the use of atomic force microscopy (AFM) to identify and characterize an intermediate state in macrocycle shuttling in a hydrogen bonded amide-based molecular shuttle. The [2]rotaxane consists of a benzylic amide macrocycle mechanically locked onto a thread that bears both fumaramide and succinic amide-ester sites, each of which can bind to the macrocycle through up to four intercomponent hydrogen bonds. Using AFM-based single-molecule force spectroscopy, we mechanically triggered the translocation of the ring between the two principal binding sites ("stations") on the axle.

Viologen Tweezers to Probe the Force of Individual Donor-Acceptor π-Interactions.

Donor-acceptor (DA) π-interactions are weak attractive forces that are exploited widely in molecular and supramolecular chemistry. They have been characterized extensively by ensemble techniques, providing values for their energies that are useful for the design of soft materials. For implementation of motions or operations based on these DA π-interactions in wholly synthetic molecular machines, the mechanical strength and force associated with their out-of-equilibrium performance are the key parameters, in addition to their energies obtained at thermodynamic equilibrium.

How to Increase Adhesion Strength of Catechol Polymers to Wet Inorganic Surfaces.

Mussel wet adhesion is known for its outstanding strength on a variety of surfaces. On the basis of the hypothesis that 3,4-dihydroxyphenylalanine, a catecholic amino acid, governs mussel adhesion, chemists have put much effort into the design of adhesive synthetic polymers containing catechols. However, the exceptional properties exhibited by the native proteins were hardly captured.

Single-molecule mechanical unfolding experiments reveal a critical length for the formation of α-helices in peptides.

α-Helix is the most predominant secondary structure in proteins and supports many functions in biological machineries. The conformation of the helix is dictated by many factors such as its primary sequence, intramolecular interactions, or the effect of the close environment. Several computational studies have proposed that there is a critical maximum length for the formation of intact compact helical structures, supporting the fact that most intact α-helices in proteins are constituted of a small number of amino acids.

Single-molecule force spectroscopy to decipher the early signalling step in membrane-bound penicillin receptors embedded into a lipid bilayer.

Understanding the molecular mechanism by which the signal of the presence of an antibiotic is transduced from outside to inside the bacterial cell is of fundamental interest for the β-lactam antibiotic resistance problem, but remains difficult to accomplish. No approach has ever addressed entire penicillin receptors in a membrane environment. Here we describe a method to investigate the purified Bacillus licheniformis BlaR1 receptor -a membrane-bound penicillin receptor involved in β-lactam resistance- embedded into a lipid bilayer in absence or presence of penicillin.

Synthetic oligorotaxanes exert high forces when folding under mechanical load.

Folding is a ubiquitous process that nature uses to control the conformations of its molecular machines, allowing them to perform chemical and mechanical tasks. Over the years, chemists have synthesized foldamers that adopt well-defined and stable folded architectures, mimicking the control expressed by natural systems . Mechanically interlocked molecules, such as rotaxanes and catenanes, are prototypical molecular machines that enable the controlled movement and positioning of their component parts .

Dynamic force spectroscopy of synthetic oligorotaxane foldamers.

Wholly synthetic molecules involving both mechanical bonds and a folded secondary structure are one of the most promising architectures for the design of functional molecular machines with unprecedented properties. Here, we report dynamic single-molecule force spectroscopy experiments that explore the energetic details of donor-acceptor oligorotaxane foldamers, a class of molecular switches. The mechanical breaking of the donor-acceptor interactions responsible for the folded structure shows a high constant rupture force over a broad range of loading rates, covering three orders of magnitude.

Where Ion Mobility and Molecular Dynamics Meet To Unravel the (Un)Folding Mechanisms of an Oligorotaxane Molecular Switch.

At the interface between foldamers and mechanically interlocked molecules, oligorotaxanes exhibit a spring-like folded secondary structure with remarkable mechanical and physicochemical properties. Among these properties, the ability of oligorotaxanes to act as molecular switches through controlled modulations of their spatial extension over (un)folding dynamics is of particular interest. The present study aims to assess and further characterize this remarkable feature in the gas phase using mass spectrometry tools.

Force measurements reveal how small binders perturb the dissociation mechanisms of DNA duplex sequences.

The force-driven separation of double-stranded DNA is crucial to the accomplishment of cellular processes like genome transactions. Ligands binding to short DNA sequences can have a local stabilizing or destabilizing effect and thus severely affect these processes. Although the design of ligands that bind to specific sequences is a field of intense research with promising biomedical applications, so far, their effect on the force-induced strand separation has remained elusive.

Unraveling the complexity of the interactions of DNA nucleotides with gold by single molecule force spectroscopy.

Addressing the effect of different environmental factors on the adsorption of DNA to solid supports is critical for the development of robust miniaturized devices for applications ranging from biosensors to next generation molecular technology. Most of the time, thiol-based chemistry is used to anchor DNA on gold - a substrate commonly used in nanotechnology - and little is known about the direct interaction between DNA and gold. So far there have been no systematic studies on the direct adsorption behavior of the deoxyribonucleotides (i.

Influence of the protein context on the polyglutamine length-dependent elongation of amyloid fibrils.

Polyglutamine (polyQ) diseases, including Huntington's disease, are neurodegenerative disorders associated with the abnormal expansion of a polyQ tract within nine proteins. The polyQ expansion is thought to be a major determinant in the development of neurotoxicity, triggering protein aggregation into amyloid fibrils, although non-polyQ regions play a modulating role. In this work, we investigate the relative importance of the polyQ length, its location within a host protein, and the conformational state of the latter in the amyloid fibril elongation.

Robust bio-inspired antibacterial surfaces based on the covalent binding of peptides on functional atmospheric plasma thin films.

Here, we describe a robust process aiming at conferring antibacterial properties on stainless steel through the covalent grafting of nisin, a natural antimicrobial peptide, onto a functional plasma thin film deposited by an atmospheric pressure dielectric barrier discharge process. The three different steps of the procedure, namely the deposition of a carboxyl rich thin layer, the surface activation by using a zero-length crosslinking agent and the nisin immobilisation, are reported and thoroughly characterised. A correlation between the carboxylic group surface concentration and the surface roughness onto the antibacterial properties of the layers is evidenced.

Biointerface multiparametric study of intraocular lens acrylic materials.

Purpose: To compare hydrophilic and hydrophobic acrylic materials designed for intraocular lenses in a multiparametric investigation in a liquid environment to highlight their properties in terms of adhesion forces, lens epithelial cell (LEC) adhesion, and tissue response as indicators of the risk for posterior capsule opacification (PCO) development.

Setting: University of Liège, Liège, Belgium.

Design: Experimental study.

Collapsing and reswelling kinetics of thermoresponsive polymers on surfaces: a matter of confinement and constraints.

We report on the collapsing and reswelling ability of grafted poly(methyl vinyl ether) chains of different molecular architectures. In order to study the influence of constraints and confinement of the chains, the polymer was grafted onto AFM tips, as a model of a curved nano-sized surface, and onto macroscopic silicon substrates for comparison purposes. AFM-based force spectroscopy experiments were performed to characterise at the nanoscale the temperature-dependent collapsing process and the reversibility to the swollen state on both substrates.

The dynamics of complex formation between amylose brushes on gold and fatty acids by QCM-D.

Amylose brushes were synthesized by enzymatic polymerization with glucose-1-phosphate as monomer and rabbit muscle phosphorylase b as catalyst on gold-covered surfaces of a quartz crystal microbalance. Fourier transform infrared (FT-IR) spectra confirmed the presence of the characteristic absorption peaks of amylose between 3100 cm(-1) and 3500 cm(-1). The thickness of the amylose brushes-measured by Spectroscopic Ellipsometry--can be tailored from 4 to 20 nm, depending on the reaction time.

Ion mobility spectrometry reveals duplex DNA dissociation intermediates.

Electrospray ionization (ESI) soft desolvation is widely used to investigate fragile species such as nucleic acids. Tandem mass spectrometry (MS/MS) gives access to the gas phase energetics of the intermolecular interactions in the absence of solvent, by following the dissociation of mass-selected ions. Ion mobility mass spectrometry (IMS) provides indications on the tridimensional oligonucleotide structure by attributing a collision cross section (CCS) to the studied ion.

Biomolecule-based antibacterial coating on a stainless steel surface: multilayer film build-up optimization and stability study.

The goal of this paper was to establish the durability profile of antibacterial multilayer thin films under storage and usage conditions. Thin films were built on stainless steel (SS) by means of a layer-by-layer process alternating a negatively charged polyelectrolyte, polyacrylic acid, with a cationic antibacterial peptide, nisin. SS coupons coated with the antibacterial film were challenged under environmental and usage conditions likely to be encountered in real-world applications.

Antibacterial polyelectrolyte micelles for coating stainless steel.

In this study, we report on the original synthesis and characterization of novel antimicrobial coatings for stainless steel by alternating the deposition of aqueous solutions of positively charged polyelectrolyte micelles doped with silver-based nanoparticles with a polyanion. The micelles are formed by electrostatic interaction between two oppositely charged polymers: a polycation bearing 3,4-dihydroxyphenylalanine units (DOPA, a major component of natural adhesives) and a polyanion (poly(styrene sulfonate), PSS) without using any block copolymer. DOPA units are exploited for their well-known ability to anchor to stainless steel and to form and stabilize biocidal silver nanoparticles (Ag(0)).

Raman spectroscopy and laser desorption mass spectrometry for minimal destructive forensic analysis of black and color inkjet printed documents.

Inkjet ink analysis is the best way to discriminate between printed documents, or even though more difficult, to connect an inkjet printed document with a brand or model of printers. Raman spectroscopy and laser desorption mass spectrometry (LDMS) have been demonstrated as powerful tools for dyes and pigments analysis, which are ink components. The aim of this work is to evaluate the aforementioned techniques for inkjet inks analysis in terms of discriminating power, information quality, and nondestructive capability.

Clay and DOPA containing polyelectrolyte multilayer film for imparting anticorrosion properties to galvanized steel.

A facile and green approach is developed to impart remarkable protection against corrosion to galvanized steel. A protecting multilayer film is formed by alternating the deposition of a polycation bearing catechol groups, used as corrosion inhibitors, with clay that induces barrier properties. This coating does not affect the esthetical aspect of the surface and does not release any toxic molecules in the environment.

A single synthetic small molecule that generates force against a load.

Some biomolecules are able to generate directional forces by rectifying random thermal motions. This allows these molecular machines to perform mechanical tasks such as intracellular cargo transport or muscle contraction in plants and animals. Although some artificial molecular machines have been synthesized and used collectively to perform mechanical tasks, so far there have been no direct measurements of mechanical processes at the single-molecule level.

Controlled deposition of highly oriented type I collagen mimicking in vivo collagen structures.

The structural arrangement of type I collagen in vivo is critical for the normal functioning of tissues, such as bone, cornea, and blood vessels. At present, there are no low-cost techniques for fabricating aligned collagen structures for applications in regenerative medicine. Here, we report a straightforward approach to fabricate collagen films, with defined orientation of collagen fibrillar aggregates within a matrix of oriented collagen molecules.