Waning success: a 2013-2022 spatial and temporal trend analysis of malaria in Ethiopia.

Background: Despite consecutive decades of success in reducing malaria transmission, Ethiopia went off track towards its goal of malaria elimination by 2030, as outlined in the NMCP malaria strategy. Recent malaria outbreaks in Ethiopia are attributed to the emergence and spread of diagnostic and drug-resistant Plasmodium falciparum, increased insecticide resistance in major vectors and the spread of invasive Anopheles stephensi. The effects of the COVID-19 pandemic, environmental anomalies and internal conflicts have also potentially played a role in increasing malaria transmission.

Larval source management in Ethiopia: modelling to assess its effectiveness in curbing malaria surge in dire Dawa and Batu Towns.

Background: Ethiopia faces several severe challenges in terms of malaria elimination, including drug resistance and diagnostic evasion in the Plasmodium falciparum parasite, insecticide resistance in the primary Anopheles malaria vector, and, most recently, the invasion of the Asian malaria vector Anopheles stephensi. Novel malaria control methods are therefore needed, and in this paper, we describe the evaluation of a larval source management (LSM) strategy implemented in response to An. stephensi.

Field surveys in rural Tanzania reveal key opportunities for targeted larval source management and species sanitation to control malaria in areas dominated by Anopheles funestus.

Background: Larval source management (LSM) is re-emerging as a critical malaria intervention to address challenges associated with core vector control tools, such as insecticide-treated nets (ITNs), and to accelerate progress towards elimination. Presently, LSM is not widely used in rural settings and is instead more commonly applied in urban and arid settings. A systematic entomological assessment was conducted in rural communities of southeastern Tanzania, where insecticide-treated nets (ITNs) are widely used, to explore opportunities for deploying LSM to improve malaria control.

Investigating the association between household exposure to Anopheles stephensi and malaria in Sudan and Ethiopia: A case-control study protocol.

Background: Endemic African malaria vectors are poorly adapted to typical urban ecologies. However, Anopheles stephensi, an urban malaria vector formerly confined to South Asia and the Persian Gulf, was recently detected in Africa and may change the epidemiology of malaria across the continent. Little is known about the public health implications of An.

Spatiotemporal distribution and bionomics of Anopheles stephensi in different eco-epidemiological settings in Ethiopia.

Background: Malaria is a major public health concern in Ethiopia, and its incidence could worsen with the spread of the invasive mosquito species Anopheles stephensi in the country. This study aimed to provide updates on the distribution of An. stephensi and likely household exposure in Ethiopia.

Influence of larval growth and habitat shading on retreatment frequencies of biolarvicides against malaria vectors.

Effective larviciding for malaria control requires detailed studies of larvicide efficacies, aquatic habitat characteristics, and life history traits of target vectors. Mosquitoes with brief larval phases present narrower timeframes for biolarvicidal effects than mosquitoes with extended periods. We evaluated two biolarvicides, VectoBac (Bacillus thuringiensis israelensis (Bti)) and VectoMax (Bti and Bacillus sphaericus) against Anopheles funestus and Anopheles arabiensis in shaded and unshaded habitats; and explored how larval development might influence retreatment intervals.

Changes in contributions of different Anopheles vector species to malaria transmission in east and southern Africa from 2000 to 2022.

Background: Malaria transmission in Africa is facilitated by multiple species of Anopheles mosquitoes. These vectors have different behaviors and vectorial capacities and are affected differently by vector control interventions, such as insecticide-treated nets and indoor residual spraying. This review aimed to assess changes in the contribution of different vector species to malaria transmission in east and southern Africa over 20 years of widespread insecticide-based vector control.

Integrating vector control within an emerging agricultural system in a region of climate vulnerability in southern Malawi: A focus on malaria, schistosomiasis, and arboviral diseases.

Infectious diseases are emerging at an unprecedented rate while food production intensifies to keep pace with population growth. Large-scale irrigation schemes have the potential to permanently transform the landscape with health, nutritional and socio-economic benefits; yet, this also leads to a shift in land-use patterns that can promote endemic and invasive insect vectors and pathogens. The balance between ensuring food security and preventing emerging infectious disease is a necessity; yet the impact of irrigation on vector-borne diseases at the epidemiological, entomological and economic level is uncertain and depends on the geographical and climatological context.

Effect of passive and active ventilation on malaria mosquito house entry and human comfort: an experimental study in rural Gambia.

Rural houses in sub-Saharan Africa are typically hot and allow malaria mosquitoes inside. We assessed whether passive or active ventilation can reduce house entry of malaria mosquitoes and cool a bedroom at night in rural Gambia. Two identical experimental houses were used: one ventilated and one unventilated (control).

Review of the ecology and behaviour of and in Western Africa and implications for vector control.

Western Africa is vulnerable to arboviral disease transmission, having recently experienced major outbreaks of chikungunya, dengue, yellow fever and Zika. However, there have been relatively few studies on the natural history of the two major human arbovirus vectors in this region, and , potentially limiting the implementation of effective vector control. We systematically searched for and reviewed relevant studies on the behaviour and ecology of and in Western Africa, published over the last 40 years.

Correction: Integrated Aedes management for the control of Aedes-borne diseases.

[This corrects the article DOI: 10.1371/journal.pntd.

Risk of Plasmodium falciparum infection in south-west Burkina Faso: potential impact of expanding eligibility for seasonal malaria chemoprevention.

Burkina Faso has one of the highest malaria burdens in sub-Saharan Africa despite the mass deployment of insecticide-treated nets (ITNs) and use of seasonal malaria chemoprevention (SMC) in children aged up to 5 years. Identification of risk factors for Plasmodium falciparum infection in rural Burkina Faso could help to identify and target malaria control measures. A cross-sectional survey of 1,199 children and adults was conducted during the peak malaria transmission season in the Cascades Region of south-west Burkina Faso in 2017.

Risk factors associated with house entry of malaria vectors in an area of Burkina Faso with high, persistent malaria transmission and high insecticide resistance.

Background: In rural Burkina Faso, the primary malaria vector Anopheles gambiae sensu lato (s.l.) primarily feeds indoors at night.

Risk factors for Plasmodium falciparum infection in pregnant women in Burkina Faso: a community-based cross-sectional survey.

Background: Malaria in pregnancy remains a public health problem in sub-Saharan Africa. Identifying risk factors for malaria in pregnancy could assist in developing interventions to reduce the risk of malaria in Burkina Faso and other countries in the region.

Methods: Two cross-sectional surveys were carried out to measure Plasmodium falciparum infection using microscopy in pregnant women in Saponé Health District, central Burkina Faso.

Impact of increased ventilation on indoor temperature and malaria mosquito density: an experimental study in The Gambia.

In sub-Saharan Africa, cooler houses would increase the coverage of insecticide-treated bednets, the primary malaria control tool. We examined whether improved ventilation, using windows screened with netting, cools houses at night and reduces malaria mosquito house entry in The Gambia. Identical houses were constructed, with badly fitting doors the only mosquito entry points.

Recommendations for building out mosquito-transmitted diseases in sub-Saharan Africa: the DELIVER mnemonic.

In sub-Saharan Africa, most transmission of mosquito-transmitted diseases, such as malaria or dengue, occurs within or around houses. Preventing mosquito house entry and reducing mosquito production around the home would help reduce the transmission of these diseases. Based on recent research, we make key recommendations for reducing the threat of mosquito-transmitted diseases through changes to the built environment.

A cohort study to identify risk factors for Plasmodium falciparum infection in Burkinabe children: implications for other high burden high impact countries.

Background: Progress in controlling malaria has stalled in recent years. Today the malaria burden is increasingly concentrated in a few countries, including Burkina Faso, where malaria is not declining. A cohort study was conducted to identify risk factors for malaria infection in children in southwest Burkina Faso, an area with high insecticide-treated net (ITN) coverage and insecticide-resistant vectors.

A greener vision for vector control: The example of the Singapore dengue control programme.

Vector-borne diseases are a major cause of morbidity and mortality worldwide. Aedes-borne diseases, in particular, including dengue, chikungunya, yellow fever, and Zika, are increasing at an alarming rate due to urbanisation, population movement, weak vector control programmes, and climate change. The World Health Organization calls for strengthening of vector control programmes in line with the Global Vector Control Response (GVCR) strategy, and many vector control programmes are transitioning to this new approach.

Vector bionomics and vectorial capacity as emergent properties of mosquito behaviors and ecology.

Mosquitoes are important vectors for pathogens that infect humans and other vertebrate animals. Some aspects of adult mosquito behavior and mosquito ecology play an important role in determining the capacity of vector populations to transmit pathogens. Here, we re-examine factors affecting the transmission of pathogens by mosquitoes using a new approach.

The importance of vector control for the control and elimination of vector-borne diseases.

Vector-borne diseases (VBDs) such as malaria, dengue, and leishmaniasis exert a huge burden of morbidity and mortality worldwide, particularly affecting the poorest of the poor. The principal method by which these diseases are controlled is through vector control, which has a long and distinguished history. Vector control, to a greater extent than drugs or vaccines, has been responsible for shrinking the map of many VBDs.

Larviciding to prevent malaria transmission.

Background: Larviciding refers to the regular application of chemical or microbial insecticides to water bodies or water containers to kill the aquatic immature forms of the mosquito (the larvae and pupae).

Objectives: To summarize research evidence evaluating whether larviciding with chemical or microbial insecticides prevents malaria transmission.

Search Methods: We searched the Cochrane Infectious Diseases Group Specialized Register; the Cochrane Central Register of Controlled Trials (CENTRAL), published in the Cochrane Library; MEDLINE; Embase; CAB Abstracts; LILACS; the World Health Organization International Clinical Trials Registry Platform (WHO ICTRP); ClinicalTrials.

Reduced mosquito survival in metal-roof houses may contribute to a decline in malaria transmission in sub-Saharan Africa.

In The Gambia, metal-roof houses were hotter during the day than thatched-roof houses. After 24 h, the mortality of Anopheles gambiae, the principal African malaria vector, was 38% higher in metal-roof houses than thatched ones. During the day, mosquitoes in metal-roof houses moved from the hot roof to cooler places near the floor, where the temperature was still high, reaching 35 °C.

Integrated Aedes management for the control of Aedes-borne diseases.

Background: Diseases caused by Aedes-borne viruses, such as dengue, Zika, chikungunya, and yellow fever, are emerging and reemerging globally. The causes are multifactorial and include global trade, international travel, urbanisation, water storage practices, lack of resources for intervention, and an inadequate evidence base for the public health impact of Aedes control tools. National authorities need comprehensive evidence-based guidance on how and when to implement Aedes control measures tailored to local entomological and epidemiological conditions.

How house design affects malaria mosquito density, temperature, and relative humidity: an experimental study in rural Gambia.

Introduction: Unprecedented improvements in housing are occurring across much of rural sub-Saharan Africa, but the consequences of these changes on malaria transmission remain poorly explored. We examined how different typologies of rural housing affect mosquito house entry and indoor climate.

Methods: Five typologies of mud-block houses were constructed in rural Gambia: four were traditional designs with poorly fitted doors and one was a novel design with gable windows to improve ventilation.