Post-Modification of Copolymers Obtained by ATRP for an Application in Heterogeneous Asymmetric Salen Catalysis.

Copolymers are valuable supports for obtaining heterogeneous catalysts that allow their recycling and therefore substantial savings, particularly in the field of asymmetric catalysis. This contribution reports the use of two comonomers: Azido-3-propylmethacrylate (AZMA) bearing a reactive azide function was associated with 2-methoxyethyl methacrylate (MEMA), used as a spacer, for the ATRP synthesis of copolymers, and then post-functionalized with a propargyl chromium salen complex. The controlled homopolymerization of MEMA by ATRP was firstly described and proved to be more controlled in molar mass than that of AZMA for conversions up to 63%.

SERS characterization of aggregated and isolated bacteria deposited on silver-based substrates.

Surface-enhanced Raman scattering (SERS), based on the enhancement of the Raman signal of molecules positioned within a few nanometres from a structured metal surface, is ideally suited to provide bacterial-specific molecular fingerprints which can be used for analytical purposes. However, for some complex structures such as bacteria, the generation of reproducible SERS spectra is still a challenging task. Among the various factors influencing the SERS variability (such as the nature of SERS-active substrate, Raman parameters and bacterial specificity), we demonstrate in this study that the environment of Gram-positive and Gram-negative bacteria deposited on ultra-thin silver films also impacts the origin of the SERS spectra.

Insights into the Ochratoxin A/Aptamer Interactions on a Functionalized Silicon Surface by Fourier Transform Infrared and UV-Vis Studies.

The association of a mycotoxin-ochratoxin A (OTA)-with a high-affinity DNA aptamer (anti-OTA) immobilized on a functionalized surface has been investigated at the molecular level. Anti-OTA aptamers are coupled by aminolysis in several steps on an acid-terminated alkyl monolayer grafted on a silicon substrate, and Fourier transform infrared spectroscopy in attenuated total reflection geometry is used to assess the immobilization of anti-OTA (in its unfolded single-strand form) and determine its areal density (ca. 1.

Rapid and sensitive identification of uropathogenic Escherichia coli using a surface-enhanced-Raman-scattering-based biochip.

Rapid, selective and sensitive sensing of bacteria remains challenging. We report on a highly sensitive and reproducible surface-enhanced Raman spectroscopy (SERS)-based sensing approach for the detection of uropathogenic Escherichia coli (E. coli) bacteria in urine.

Etching and Chemical Control of the Silicon Nitride Surface.

Silicon nitride is used for many technological applications, but a quantitative knowledge of its surface chemistry is still lacking. Native oxynitride at the surface is generally removed using fluorinated etchants, but the chemical composition of surfaces still needs to be determined. In this work, the thinning (etching efficiency) of the layers after treatments in HF and NHF solutions has been followed by using spectroscopic ellipsometry.

A quantitative method to discriminate between non-specific and specific lectin-glycan interactions on silicon-modified surfaces.

Essential to the success of any surface-based carbohydrate biochip technology is that interactions of the particular interface with the target protein be reliable and reproducible and not susceptible to unwanted nonspecific adsorption events. This condition is particularly important when the technology is intended for the evaluation of low-affinity interactions such as those typically encountered between lectins and their monomeric glycan ligands. In this paper, we describe the fabrication of glycan (mannoside and lactoside) monolayers immobilized on hydrogenated crystalline silicon (111) surfaces.

Carbohydrate microarray for the detection of glycan-protein interactions using metal-enhanced fluorescence.

Carbohydrate arrays are potentially one of the most attractive tools to study carbohydrate-based interactions. This paper describes a new analytical platform that exploits metal-enhanced fluorescence for the sensitive and selective screening of carbohydrate-lectin interactions. The chip consists of a glass slide covered with gold nanostructures, postcoated with a thin layer of amorphous silicon-carbon alloy (a-Si0.

Quantitative assessment of the multivalent protein-carbohydrate interactions on silicon.

A key challenge in the development of glycan arrays is that the sensing interface be fabricated reliably so as to ensure the sensitive and accurate analysis of the protein-carbohydrate interaction of interest, reproducibly. These goals are complicated in the case of glycan arrays as surface sugar density can influence dramatically the strength and mode of interaction of the sugar ligand at any interface with lectin partners. In this Article, we describe the preparation of carboxydecyl-terminated crystalline silicon (111) surfaces onto which are grafted either mannosyl moieties or a mixture of mannose and spacer alcohol molecules to provide "diluted" surfaces.

Influence of the molecular design on the antifouling performance of poly(ethylene glycol) monolayers grafted on (111) Si.

Various poly(ethylene glycol) monomethyl ether moieties were grafted onto hydrogenated silicon surfaces in order to investigate the influence of the molecular design on the antifouling performance of such coatings. The grafted chains were either oligo(ethylene oxide) chains (EG)(n)OMe bound to silicon via Si-O-C covalent bonds, or hybrid alkyl/oligo(ethylene oxide) chains C(p)(EG)(n)OMe bound via Si-C covalent bonds (from home-synthesized precursors). Quantitative IR spectroscopy gave the molecular coverage of the grafted layers, and AFM imaging demonstrated that a proper surfactinated rinse yields C(p)(EG)(n)OMe layers free of unwanted residues.

Development of a metal-chelated plasmonic interface for the linking of His-peptides with a droplet-based surface plasmon resonance read-off scheme.

Monolayers of metal complexes were covalently attached to the surface of lamellar SPR interfaces (Ti/Ag/a-Si(0.63)C(0.37)) for binding histidine-tagged peptides with a controlled molecular orientation.

Plasmonic properties of silver nanostructures coated with an amorphous silicon-carbon alloy and their applications for sensitive sensing of DNA hybridization.

The use of an amorphous silicon-carbon alloy overcoating on silver nanostructures in a localized surface plasmon resonance (LSPR) sensing platform allows for decreasing the detection limit by an order of magnitude as compared to sensors based on gold nanostructures deposited on glass. In addition, silver based multilayer structures show a distinct plasmonic behaviour as compared to gold based nanostructures, which provides the sensor with an increased short-range sensitivity and a decreased long-range sensitivity.

Localized surface plasmon-enhanced fluorescence spectroscopy for highly-sensitive real-time detection of DNA hybridization.

Versatile and highly-sensitive detection of DNA hybridization is described using metal nanostructures-enhanced fluorescence (MEF) emission intensity when fluorescently-labeled DNA oligomers are covalently immobilized on a nanometer-thin amorphous silicon-carbon layer capping the metal nanostructures. The MEF structures are formed by thermal deposition of silver, gold or silver/gold thin films on glass surfaces and post-annealing at 500 degrees C. The choice of the metal film allows for tuning the optical properties of the interface.

Surface plasmon resonance on gold and silver films coated with thin layers of amorphous silicon-carbon alloys.

The paper reports on a novel surface plasmon resonance (SPR) substrate architecture based on the coating of a gold (Au) or silver (Ag) substrate with 5 nm thin amorphous silicon-carbon alloy films. Ag/a-Si(1-x)C(x):H and Au/a-Si(1-x)C(x):H multilayers are found to provide a significant advantage in terms of sensitivity over both Ag and Au for SPR refractive index sensing. The possibility for the subsequent linking of stable organic monolayers through Si-C bonds is demonstrated.

Amorphous silicon-carbon alloys for efficient localized surface plasmon resonance sensing.

This paper describes a novel platform for preparing localized surface plasmon resonance (LSPR) sensing surfaces. It is based on the coating of gold nanostructures deposited on glass with an amorphous silicon-carbon alloy overcoating. The interest in coating the Au NSs with an amorphous silicon-carbon alloy resides in the possibility of incorporating carboxyl functions directly onto the surface via Si-C covalent bonds.

Well-defined carboxyl-terminated alkyl monolayers grafted onto H-Si(111): packing density from a combined AFM and quantitative IR study.

This work demonstrates that well-defined mixed carboxyl-terminated/methyl-terminated alkyl monolayers can be prepared in one step on H-terminated Si(111) via direct photochemical hydrosilylation of undecylenic acid and 1-decene mixtures. As evidenced by AFM imaging and IR spectroscopy, a final rinse in hot acetic acid leaves the functionalized surface atomically smooth and perfectly free of physisorbed contaminants while unwanted material remains atop the monolayer with most other common solvents. The compositional surface chemistry was determined from a truly quantitative IR (ATR geometry) study in the range of 900-4000 cm(-)(1).