Exploiting Acetal Moieties for the Synthesis of Degradable-On-Demand Polymeric Architectures.

Developing polymers with labile bonds has attracted increasing attention since it can favor the chemical recycling into oligomers or even the starting monomers that could be recovered and re-used. Different chemical bonds can break upon exposure to external stimuli, such as thermal, UV, or chemical triggers. Among these, the acetal bond can degrade under mild acidic conditions.

Triggering of Polymer-Degrading Enzymes from Layered Double Hydroxides for Recycling Strategies.

The use of degrading enzymes in polymer formulation is a very attractive strategy to manage the end-of-life of plastics. However, high temperatures cause the denaturation of enzymes and the loss of their catalytic activity; therefore, protection strategies are necessary. Once protected, the enzyme needs to be released in appropriate media to exert its catalytic activity.

Valorization of Ferulic Acid from Agro-Industrial by-Products for Application in Agriculture.

The use of bioplastic mulch in agriculture has increased dramatically in the last years throughout the world. Nowadays, biodegradable materials for mulching films strive to constitute a reliable and more sustainable alternative to classical materials such as polyethylene (PE). The main challenge is to improve their durability in the soil to meet the required service length for crop farming by using benign and sustainable antioxidant systems.

Enzymatic Degradation of the Most Common Aliphatic Bio-Polyesters and Evaluation of the Mechanisms Involved: An Extended Study.

Commercial hydrolytic enzymes belonging to different subclasses (several lipases, proteinase k, cutinase) were investigated for their ability to degrade different aliphatic polyesters, i.e., poly(butylene succinate) (PBS), poly(butylene succinate--adipate) (PBSA), two poly(caprolactone), having two different molecular weights, poly(lactic acid) (PLA) and poly(propylene carbonate) (PPC).

Current Advances in the Sustainable Conversion of 5-Hydroxymethylfurfural into 2,5-Furandicarboxylic Acid.

2,5-Furandicarboxylic acid (FDCA) is currently considered one of the most relevant bio-sourced building blocks, representing a fully sustainable competitor for terephthalic acid as well as the main component in green polymers such as poly(ethylene 2,5-furandicarboxylate) (PEF). The oxidation of biobased 5-hydroxymethylfurfural (HMF) represents the most straightforward approach to obtain FDCA, thus attracting the attention of both academia and industries, as testified by Avantium with the creation of a new plant expected to produce 5000 tons per year. Several approaches allow the oxidation of HMF to FDCA.

End of Life of Biodegradable Plastics: Composting versus Re/Upcycling.

Nowadays the issues related to the end of life of traditional plastics are very urgent due to the important pollution problems that plastics have caused. Biodegradable plastics can help to try to mitigate these problems, but even bioplastics need much attention to carefully evaluate the different options for plastic waste disposal. In this Minireview, three different end-of-life scenarios (composting, recycling, and upcycling) were evaluated in terms of literature review.

Recent advances in the production of biomedical systems based on polyhydroxyalkanoates and exopolysaccharides.

In recent years, growing attention has been devoted to naturally occurring biological macromolecules and their ensuing application in agriculture, cosmetics, food and pharmaceutical industries. They inherently have antigenicity, low immunogenicity, excellent biocompatibility and cytocompatibility, which are ideal properties for the design of biomedical devices, especially for the controlled delivery of active ingredients in the most diverse contexts. Furthermore, these properties can be modulated by chemical modification via the incorporation of other (macro)molecules in a random or controlled way, aiming at improving their functionality for each specific application.

Bio-Based Furan-Polyesters/Graphene Nanocomposites Prepared by In Situ Polymerization.

In situ intercalative polymerization has been investigated as a strategic way to obtain poly(propylene 2,5-furandicarboxylate) (PPF) and poly(hexamethylene 2,5-furandicarboxylate) (PHF) nanocomposites with different graphene types and amounts. Graphene (G) has been dispersed in surfactant stabilized water suspensions. The loading range in composites was 0.

Integrated Efforts for the Valorization of Sweet Potato By-Products within a Circular Economy Concept: Biocomposites for Packaging Applications Close the Loop.

With the aim to fully exploit the by-products obtained after the industrial extraction of starch from sweet potatoes, a cascading approach was developed to extract high-value molecules, such as proteins and pectins, and to valorize the solid fraction, rich in starch and fibrous components. This fraction was used to prepare new biocomposites designed for food packaging applications. The sweet potato residue was added to poly(3-hydroxybutyrate--3-hydroxyvalerate) in various amounts up to 40 wt % by melt mixing, without any previous treatment.

Water Vapor Sorption and Diffusivity in Bio-Based Poly(Ethylene Vanillate)-PEV.

The dynamic and equilibrium water vapor sorption properties of amorphous and highly crystalline poly(ethylene vanillate) (PEV) films were determined via gravimetric analysis, at 20 °C, over a wide range of relative humidity (0-95% RH). At low RH%, the dynamic of the sorption process obeys Fick's law while at higher relative humidity it is characterized by a drift ascribable to non-Fickian relaxations. The non-Fickian relaxations, which are responsible for the incorporation of additional water, are correlated with the upturn of the sorption isotherms and simultaneously the hysteresis recorded between sorption and desorption cycles.

Cascade strategies for the full valorisation of Garganega white grape pomace towards bioactive extracts and bio-based materials.

Agro-waste reduction and reuse are among the current main social challenges. In this perspective, the present research was aimed at the complete valorisation of Garganega grape pomace by recovering bioactive phenol extracts and by testing the solid fibre extract residues in composite formulation for packaging applications. The pomace was derived from white wine production, therefore, respect to red pomace, it was promptly removed from must after pressing, and its exploitation can be particularly interesting and valuable as still rich in active compounds.

Eco-Conversion of Two Winery Lignocellulosic Wastes into Fillers for Biocomposites: Vine Shoots and Wine Pomaces.

Two winery residues, namely vine shoots (ViSh) and wine pomace (WiPo), were up-cycled as fillers in PHBV-based biocomposites. Answering a biorefinery approach, the impact of a preliminary polyphenols extraction step using an acetone/water mixture on the reinforcing effect of fillers was assessed. Biocomposites (filler content up to 20 wt%) were prepared by melt-mixing and compared in terms of final performance (thermal, mechanical and barrier).

Polymorphism and Multiple Melting Behavior of Bio-Based Poly(propylene 2,5-furandicarboxylate).

Furandicarboxylate-based polyesters are considered an interesting class of bio-based polymers due to their improved properties with respect to the petrol-based terephthalate homologs. An in-depth analysis of the crystal structure of poly(propylene 2,5-furandicarboxylate) (PPF), after maximum possible removal of the catalyst, was carried out. The study disclosed that purified PPF presents two different crystalline phases after crystallization from the melt.

State-of-the-Art Production Chains for Peas, Beans and Chickpeas-Valorization of Agro-Industrial Residues and Applications of Derived Extracts.

The world is confronted with the depletion of natural resources due to their unsustainable use and the increasing size of populations. In this context, the efficient use of by-products, residues and wastes generated from agro-industrial and food processing opens the perspective for a wide range of benefits. In particular, legume residues are produced yearly in very large amounts and may represent an interesting source of plant proteins that contribute to satisfying the steadily increasing global protein demand.

From winery waste to bioactive compounds and new polymeric biocomposites: A contribution to the circular economy concept.

The paper aims at optimising and validating possible routes toward the full valorisation of grape agrowaste to produce bioactive molecules and new materials. Starting from Merlot red pomace, phenol complex mixtures were successfully extracted by using two different approaches. Extracts obtained by solvent-based (SE) technique contained up to 46.

Olive Mill Wastewater Valorization in Multifunctional Biopolymer Composites for Antibacterial Packaging Application.

Olive mill wastewater (OMW) is the aqueous waste derived from the production of virgin olive oil. OMW typically contains a wide range of phenol-type molecules, which are natural antioxidants and/or antibacterials. In order to exploit the bioactive molecules and simultaneously decrease the environmental impact of such a food waste stream, OMW has been intercalated into the host structure of ZnAl layered double hydroxide (LDH) and employed as an integrative filler for the preparation of poly(butylene succinate) (PBS) composites by in situ polymerization.

Outstanding chain-extension effect and high UV resistance of polybutylene succinate containing amino-acid-modified layered double hydroxides.

Polybutylene succinate (PBS) nanocomposite materials were prepared using a melt compounding process. The MgAl-based PBS nanocomposites, dispersed with inorganic-organic hybrid materials (layered double hydroxides, LDHs), were functionalized with the amino acids L-histidine (HIS) and L-phenylalanine (PHE). The rheological and anti-ultraviolet (anti-UV) properties were investigated and compared to filler-free PBS as well as LDH MgAl/nitrate as references.

Bio-Based PA11/Graphene Nanocomposites Prepared by Polymerization.

Bio-based polyamide 11 (PA11)-graphene nanocomposites with different filler concentrations (0.25, 0.5, 0.

Dual chain extension effect and antibacterial properties of biomolecules interleaved within LDH dispersed into PBS by in situ polymerization.

Nanocomposites based on poly(butylene succinate) (PBS) and hydrotalcite-type anionic clays (HTs) organo-modified with biomolecules characterized by antibacterial and/or antioxidant activities, such as l-ascorbic acid (ASA), phloretic acid (HPP), l-tyrosine (TYR) and l-tryptophan (TRP), have been prepared by in situ polymerization. From XRD analysis and rheology experiments in a molten polymer state, intercalated HT hybrid platelets acting here as a hybrid filler are found to be well dispersed into polymers while providing a chain extension effect on PBS. Moreover, the molecules, when hosted within a HT interlayer gap, do preserve their pristine antibacterial activity, both in HT and in the resulting PBS composites.

A Sustainable Route to a Terephthalic Acid Precursor.

A new synthetic pathway for the production of p-toluic acid has been developed starting from reagents derived from renewable resources. A Diels-Alder reaction between sorbic and acrylic acids is followed by a combined dehydrogenation/ decarboxylation process, providing p-toluic acid in high yields. This route permits to use milder conditions compared to other Diels-Alder approaches reported in the literature, and therefore can contribute to a more sustainable terephthalic acid production.