Dual-step method to manufacture a polymeric GRIN lens with a high refractive index range.

We introduce a new method to obtain gradient index (GRIN) lenses by dual-step process based on interdiffusion of two different polymeric solutions and gelation of the final mixture. The aim of the study was investigated as a simple process to produce a gel characterized by a continuous axial concentration gradient starting from two thermoplastic polymers [poly(vinyl alcohol) and poly(acrylic acid)] having different refractive indexes. We also introduced a laser scanning system that is conveniently implemented to analyze the refractive index variation in the samples.

Sustainable, Fluorine-Free, Low Cost and Easily Processable Materials for Hydrophobic Coatings on Flexible Plastic Substrates.

Zinc oxide nanoparticles (ZnONPs) and stearic acid are herein used for the preparation of hydrophobic coatings with good moisture barrier property on flexible plastic substrates. Fast, high throughput, mild and easy-to-run processing techniques, like airbrushing and gravure printing, are applied for thin films deposition of these materials. The results of this study indicated that the best hydrophobic coating in terms of water contact angle (115°) is obtained through a two-steps printing deposition of a ZnONPs layer followed by a stearic acid layer.

LFP-Based Gravure Printed Cathodes for Lithium-Ion Printed Batteries.

Printed batteries have undergone increased investigation in recent years because of the growing daily use of small electronic devices. With this in mind, industrial gravure printing has emerged as a suitable production technology due to its high speed and quality, and its capability to produce any shape of image. The technique is one of the most appealing for the production of functional layers for many different purposes, but it has not been highly investigated.

End-of-Waste SiC-Based Flexible Substrates with Tunable Electrical Properties for Electronic Applications.

We demonstrated the suitability of polymer composites filled with silicon carbide (SiC) powders derived from a recycling process for applications in electronic devices manufacturing. SiC powders have been synthesized from the process byproducts and used as fillers in the formulation of polystyrene (PS)/SiC composites, which have been used in the preparation of substrates using the solution-casting technique. Different substrates have been prepared by changing the concentration of SiC in the composite in the range from 6.

Nonvolatile RRAM cells from polymeric composites embedding recycled SiC powders.

Silicon carbide powders have been synthesized from tires utilizing a patented recycling process. Dynamic light scattering, Raman spectroscopy, SEM microscopy, and X-ray diffraction have been carried out to gather knowledge about powders and the final composite structure. The obtained powder has been proven to induce resistive switching in a PMMA polymer-based composite device.

Modelling of organic field effect transistors with inkjet printed poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) electrodes: study of the annealing effects.

In the present work, the transport mechanism of organic transistors with bottom-gate/top-contact structure, manufactured by employing traditional and inkjet printing techniques, was studied. Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) conductive polymer was used for realizing printed source, drain and gate electrodes. The influence of the printing parameters (substrate temperature, drop overlapping degree, drop emission frequency) on the uniformity and morphology of the PEDOT:PSS layer was investigated.

Novel organic LED structures based on a highly conductive polymeric photonic crystal electrode.

In this work we demonstrate the possibility to realize a novel unconventional ITO-free organic light emitting diode (OLED) utilizing a photonic polymeric electrode. Combining electron beam lithography and a plasma etching process to partially structure the highly conductive poly(3,4 ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) it is possible to realize an embedded photonic crystal (PC) structure. The realized PC-anode drastically reduces the light trapped in the OLED, demonstrating the possibility to eliminate further process stages and making it easier to use this technology even on rollable and flexible substrates.

Fabrication of novel two-dimensional nanopatterned conductive PEDOT:PSS films for organic optoelectronic applications.

This paper presents a novel strategy to fabricate two-dimensional poly(3,4 ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) photonic crystals (PCs) combining electron beam lithography (EBL) and plasma etching (PE) processes. The surface morphology of PEDOT:PSS PCs after mild oxygen plasma treatment was investigated by scanning electron microscopy. The effects on light extraction are studied experimentally.

The effect of solvent on the morphology of ZnO nanostructure assembly by dielectrophoresis and its device applications.

Different zinc oxide nanostructured morphologies were grown on photolithographically patterned silicon/silicon dioxide substrates by dielectrophoresis technique using different solvents, such as water and ethanol, obtaining rod-like and net-like nanostructures, respectively. The formation of continuous nanostructures was confirmed by scanning electron microscopic, atomic force microscopic images, and electrical characterizations. The rod-like zinc oxide nanostructures were observed in the 10 μm gap between the fingers in the pattern, whereas net-like nanostructures were formed independently of microgap.

Study of the interference effects in an optical cavity for organic light-emitting diode applications.

The interference effects generated in a bottom-emitting electroluminescent device fabricated on a polymer underlayer introduced with the aim of improving the anode roughness have been studied. The analysis of the interference fringes at different detection angles and the spatial coherence demonstrates that this phenomenon is due to multiple internal reflections that propagate in the polymer layer. This effect can be eliminated by modifying the polymer thickness and the incidence angle of the electromagnetic radiation at the anode-polymer interface.