Electrochemical DNA Sensor for Valrubicin Detection Based on Poly(Azure C) Films Deposited from Deep Eutectic Solvent.

A novel electrochemical DNA sensor was developed for the detection of the anthracycline drug, valrubicin, on the base of poly(Azure C) electropolymerized from the deep eutectic solvent reline and covered with adsorbed DNA from calf thymus. Biosensor assembling was performed by multiple scanning of the potential in one drop (100 µL) of the dye dissolved in reline and placed on the surface of a screen-printed carbon electrode. Stabilization of the coating was achieved by its polarization in the phosphate buffer.

Impedimetric DNA Sensors for Epirubicin Detection Based on Polythionine Films Electropolymerized from Deep Eutectic Solvent.

An electrochemically active polymer, polythionine (PTN), was synthesized in natural deep eutectic solvent (NADES) via multiple potential scans and characterized using cyclic voltammetry and electrochemical impedance spectroscopy (EIS). NADES consists of citric acid monohydrate, glucose, and water mixed in the molar ratio of 1:1:6. Electrodeposited PTN film was then applied for the electrostatic accumulation of DNA from salmon sperm and used for the sensitive detection of the anticancer drug epirubicin.

Impedimetric DNA Sensor Based on Electropolymerized N-Phenylaminophenothiazine and Thiacalix[4]arene Tetraacids for Doxorubicin Determination.

Electrochemical DNA sensors are highly demanded for fast and reliable determination of antitumor drugs and chemotherapy monitoring. In this work, an impedimetric DNA sensor has been developed on the base of a phenylamino derivative of phenothiazine (PhTz). A glassy carbon electrode was covered with electrodeposited product of PhTz oxidation obtained through multiple scans of the potential.

Electrochemical Aptasensors for Antibiotics Detection: Recent Achievements and Applications for Monitoring Food Safety.

Antibiotics are often used in human and veterinary medicine for the treatment of bacterial diseases. However, extensive use of antibiotics in agriculture can result in the contamination of common food staples such as milk. Consumption of contaminated products can cause serious illness and a rise in antibiotic resistance.

Electrochemical DNA Sensor Based on Acridine Yellow Adsorbed on Glassy Carbon Electrode.

Electrochemical DNA sensors offer unique opportunities for the sensitive detection of specific DNA interactions. In this work, a voltametric DNA sensor is proposed on the base of glassy carbon electrode modified with carbon black, adsorbed acridine yellow and DNA for highly sensitive determination of doxorubicin antitumor drug. The signal recorded by cyclic voltammetry was attributed to irreversible oxidation of the dye.

Electrochemical DNA Sensor Based on Poly(Azure A) Obtained from the Buffer Saturated with Chloroform.

Electropolymerized redox polymers offer broad opportunities in detection of biospecific interactions of DNA. In this work, Azure A was electrochemically polymerized by multiple cycling of the potential in phosphate buffer saturated with chloroform and applied for discrimination of the DNA damage. The influence of organic solvent on electrochemical properties of the coating was quantified and conditions for implementation of DNA in the growing polymer film were assessed using cyclic voltammetry, quartz crystal microbalance, and electrochemical impedance spectroscopy.

Electrochemical Aptasensors Based on Hybrid Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) offer a unique variety of properties and morphology of the structure that make it possible to extend the performance of existing and design new electrochemical biosensors. High porosity, variable size and morphology, compatibility with common components of electrochemical sensors, and easy combination with bioreceptors make MOFs very attractive for application in the assembly of electrochemical aptasensors. In this review, the progress in the synthesis and application of the MOFs in electrochemical aptasensors are considered with an emphasis on the role of the MOF materials in aptamer immobilization and signal generation.

Electrochemical DNA Sensor Based on the Copolymer of Proflavine and Azure B for Doxorubicin Determination.

A DNA sensor has been developed for the determination of doxorubicin by consecutive electropolymerization of an equimolar mixture of Azure B and proflavine and adsorption of native DNA from salmon sperm on a polymer film. Electrochemical investigation showed a difference in the behavior of individual drugs polymerized and their mixture. The use of the copolymer offered some advantages, i.

Electrochemical Sensor Based on Poly(Azure B)-DNA Composite for Doxorubicin Determination.

A new voltammetric DNA sensor has been developed for doxorubicin determination on the platform of a glassy carbon electrode (GCE) covered with electropolymerized Azure B film and physically adsorbed native DNA. The redox properties of polymeric Azure B were monitored at various pH and scan rates. DNA application decreased the peak currents related to polymeric and monomeric forms of the dye, whereas incubation in doxorubicin solution partially restored the peaks in accordance with the drug and DNA concentration.

Electrochemical DNA Sensors with Layered Polyaniline-DNA Coating for Detection of Specific DNA Interactions.

A DNA sensor has been proposed on the platform of glassy carbon electrode modified with native DNA implemented between two electropolymerized layers of polyaniline. The surface layer was assembled by consecutive stages of potentiodynamic electrolysis, DNA drop casting, and second electrolysis, which was required for capsulation of the DNA molecules and prevented their leaching into the solution. Surface layer assembling was controlled by cyclic voltammetry, electrochemical impedance spectroscopy, atomic force, and scanning electron microscopy.

Solid Contact Potentiometric Sensors Based on a New Class of Ionic Liquids on Thiacalixarene Platform.

New solid-contact potentiometric sensors have been developed for hydrogen phosphate recognition on the basis of ionic liquids containing tetrasubstituted derivatives of thiacalix[4]arene in and conformations with trimethyl- and triethylammonium fragments at the lower rim substituents. The recognition of selected anions including carbonate, hydrogen phosphate, perchlorate, oxalate, picrate, and EDTA was conducted using electrochemical impedance spectroscopy with ferricyanide redox probe. For the potentiometric sensor assembling, the ionic liquids were stabilized by multiwalled carbon nanotubes and carbon black deposited on the glassy carbon electrode.

Electrochemical DNA Sensor Based on Carbon Black-Poly(Neutral Red) Composite for Detection of Oxidative DNA Damage.

Voltammetric DNA sensor has been proposed on the platform of glassy carbon electrode covered with carbon black with adsorbed pillar[5]arene molecules. Electropolymerization of Neutral Red performed in the presence of native or oxidatively damaged DNA resulted in formation of hybrid material which activity depended on the DNA conditions. The assembling of the surface layer was confirmed by scanning electron microscopy and electrochemical impedance spectroscopy.

Electrochemical DNA sensors based on nanostructured organic dyes/DNA/polyelectrolyte complexes.

Polyelectrolyte complexes based on electropolymerized phenothiazine dyes (Methylene Blue and Methylene Green), poly(allylamine hydrochloride), polystyrene sulfonate and native DNA from salmon sperm have been for the first time obtained by self-assembling on the glassy carbon electrode using the layer-by-layer assembly and characterized using direct current voltammetry and electrochemical impedance spectroscopy. The changes in the charge transfer resistance and capacitance are attributed to the charge separation and the regularity of the layers depending on the number of layers and the position of DNA within the complex. Fenton reagent increases the resistance of the outer interface of the modifier with the maximal effect for the coatings including polymeric form of Methylene Green based coatings and direct contact of the DNA and polyphenothiazines.

Impedimetric aptasensor for ochratoxin A determination based on Au nanoparticles stabilized with hyper-branched polymer.

An impedimetric aptasensor for ochratoxin A (OTA) detection has been developed on the base of a gold electrode covered with a new modifier consisting of electropolymerized Neutral Red and a mixture of Au nanoparticles suspended in the dendrimeric polymer Botlorn H30®. Thiolated aptamer specific to OTA was covalently attached to Au nanoparticles via Au-S bonding. The interaction of the aptamer with OTA induced the conformational switch of the aptamer from linear to guanine quadruplex form followed by consolidation of the surface layer and an increase of the charge transfer resistance.

Label-free aptasensor for thrombin determination based on the nanostructured phenazine mediator.

New aptasensors based on DNA aptamer and polycarboxylated thiacalix[4]arenes in cone, 1,3-alternate and partial cone configurations bearing Neutral Red (NR) at substituents at the lower rim have been developed and applied for thrombin detection. The assembly of the biorecognition layer was optimized by AFM and EIS study to reach the maximal coverage and regular composition of the surface layer. The interaction of the NR groups with thrombin suppressed the electron hopping between oxidized and reduced mediator groups.

Electrochemical DNA sensors based on electropolymerized materials.

The use of electropolymerized materials in the DNA sensors is reviewed with particular emphasis on their functions and specific interactions with DNA and oligonucleotides. Polyaniline, pollypyrrole, polythiophenes and polymeric forms of phenazines play significant role in the immobilization and signal transduction of DNA sensors for the detection of hybridization events, DNA-protein and other specific interactions on the sensor surface. The mechanism of electropolymerization and the influence of oligonucleotides are also considered for various types of polymers.

Polyelectrolyte-mediated assembly of multiwalled carbon nanotubes on living yeast cells.

Here we report the three-dimensional assembly of carbon nanotubes on the polyelectrolyte-coated living Saccharomyces cerevisiae cells using the polyelectrolyte-mediated layer-by-layer approach. Synthetic polyelectrolytes poly(allylamine hydrochloride) and poly(sodium 4-styrenesulfonate) were layer-by-layer deposited on the surfaces of the yeast cells followed by the deposition of water-soluble oxidized multiwalled carbon nanotubes (MWNTs) and an additional outermost polyelectrolyte bilayer. This resulted in the fabrication of polyelectrolyte/nanotubes composite coatings on the cell walls of the yeast cells, which could be clearly seen using the conventional optical microscopy.