Orthogonal Photoswitching in a Porous Organic Framework.

The development of photoresponsive systems with non-invasive orthogonal control by distinct wavelengths of light is still in its infancy. In particular, the design of photochemically triggered-orthogonal systems integrated into solid materials that enable multiple dynamic control over their properties remains a longstanding challenge. Here, we report the orthogonal and reversible control of two types of photoswitches in an integrated solid porous framework, that is, visible-light responsive o-fluoroazobenzene and nitro-spiropyran motifs.

Solid State Machinery of Multiple Dynamic Elements in a Metal-Organic Framework.

Engineering coordinated rotational motion in porous architectures enables the fabrication of molecular machines in solids. A flexible two-fold interpenetrated pillared Metal-Organic Framework precisely organizes fast mobile elements such as bicyclopentane (BCP) (10  Hz regime at 85 K), two distinct pyridyl rotors and E-azo group involved in pedal-like motion. Reciprocal sliding of the two sub-networks, switched by chemical stimuli, modulated the sizes of the channels and finally the overall dynamical machinery.

Scintillation Properties of CsPbBr Nanocrystals Prepared by Ligand-Assisted Reprecipitation and Dual Effect of Polyacrylate Encapsulation toward Scalable Ultrafast Radiation Detectors.

Lead halide perovskite nanocrystals (LHP-NCs) embedded in polymeric hosts are gaining attention as scalable and low-cost scintillation detectors for technologically relevant applications. Despite rapid progress, little is currently known about the scintillation properties and stability of LHP-NCs prepared by the ligand assisted reprecipitation (LARP) method, which allows mass scalability at room temperature unmatched by any other type of nanostructure, and the implications of incorporating LHP-NCs into polyacrylate hosts are still largely debated. Here, we show that LARP-synthesized CsPbBr NCs are comparable to particles from hot-injection routes and unravel the dual effect of polyacrylate incorporation, where the partial degradation of LHP-NCs luminescence is counterbalanced by the passivation of electron-poor defects by the host acrylic groups.

Ultrafast and Radiation-Hard Lead Halide Perovskite Nanocomposite Scintillators.

The use of scintillators for the detection of ionizing radiation is a critical aspect in many fields, including medicine, nuclear monitoring, and homeland security. Recently, lead halide perovskite nanocrystals (LHP-NCs) have emerged as promising scintillator materials. However, the difficulty of affordably upscaling synthesis to the multigram level and embedding NCs in optical-grade nanocomposites without compromising their optical properties still limits their widespread use.

Construction of Multi-Stimuli Responsive Highly Porous Switchable Frameworks by In Situ Solid-State Generation of Spiropyran Switches.

Stimuli-responsive molecular systems support within permanently porous materials offer the opportunity to host dynamic functions in multifunctional smart materials. However, the construction of highly porous frameworks featuring external-stimuli responsiveness, for example by light excitation, is still in its infancy. Here a general strategy is presented to construct spiropyran-functionalized highly porous switchable aromatic frameworks by modular and high-precision anchoring of molecular hooks and an innovative in situ solid-state grafting approach.

Benchmark Dynamics of Dipolar Molecular Rotors in Fluorinated Metal-Organic Frameworks.

Fluorinated Metal-Organic Frameworks (MOFs), comprising a wheel-shaped ligand with geminal rotating fluorine atoms, produced benchmark mobility of correlated dipolar rotors at 2 K, with practically null activation energy (E =17 cal mol ). H T NMR revealed multiple relaxation phenomena due to the exchange among correlated dipole-rotor configurations. Synchrotron radiation X-ray diffraction at 4 K, Density Functional Theory, Molecular Dynamics and phonon calculations showed the fluid landscape and pointed out a cascade mechanism converting dipole configurations into each other.

Phosphine Oxide Porous Organic Polymers Incorporating Cobalt(II) Ions: Synthesis, Characterization, and Investigation of H Production.

Suitably functionalized porous matrices represent versatile platforms to support well-dispersed catalytic centers. In the present study, porous organic polymers (POPs) containing phosphine oxide groups were fabricated to bind transition metals and to be investigated for potential electrocatalytic applications. Cross-linking of mono- and di-phosphine monomers with multiple phenyl substituents was subject to the Friedel-Crafts (F-C) reaction and the oxidation process, which generated phosphine oxide porous polymers with pore capacity up to 0.

Collective dynamics of molecular rotors in periodic mesoporous organosilica: a combined solid-state H-NMR and molecular dynamics simulation study.

Molecular rotors offer a platform to realize controlled dynamics and modulate the functions of solids. The motional mechanisms in arrays of rotors have not been explored in depth. Crystal-like porous organosilicas, comprising -phenylene rotators pivoted onto a siloxane scaffold, were modelled using molecular dynamics (MD) simulations.

Cascade Dynamics of Multiple Molecular Rotors in a MOF: Benchmark Mobility at a Few Kelvins and Dynamics Control by CO.

Achieving sophisticated juxtaposition of geared molecular rotors with negligible energy-requirements in solids enables fast yet controllable and correlated rotary motion to construct switches and motors. Our endeavor was to realize multiple rotors operating in a MOF architecture capable of supporting fast motional regimes, even at extremely cold temperatures. Two distinct ligands, 4,4'-bipyridine (bipy) and bicyclo[1.

Carbonization of single polyacrylonitrile chains in coordination nanospaces.

It has been over half a century since polyacrylonitrile (PAN)-based carbon fibers were first developed. However, the mechanism of the carbonization reaction remains largely unknown. Structural evolution of PAN during the preoxidation reaction, a stabilization reaction, is one of the most complicated stages because many chemical reactions, including cyclization, dehydration, and cross-linking reactions, simultaneously take place.

Anionic Polymerization in Porous Organic Frameworks: A Strategy to Fabricate Anchored Polymers and Copolymers.

An anionic mechanism is used to create polymers and copolymers as confined to, or anchored to, high-surface-area porous nanoparticles. Linear polymers with soft and glassy chains, such as polyisoprene and polymethylmethacrylate, were produced by confined anionic polymerization in 3D networks of porous aromatic frameworks. Alternatively, multiple anions were generated on the designed frameworks which bear removal protons at selected positions, and initiate chain propagation, resulting in chains covalently connected to the 3D network.

Molecular Rotors in a Metal-Organic Framework: Muons on a Hyper-Fast Carousel.

Using muon-spin spectroscopy, we study the exceptional dynamical properties of rotating molecular struts engineered within a Zn-based metal-organic framework at cryogenic temperatures, where the internal motions of almost any other organic substance are quenched. Muon-spin spectroscopy is particularly suited for this aim, as the experimental evidence suggests several implantation sites for the muons, among which at least one directly onto the rotating moiety. The dynamics of the molecular rotors are characterized by the exceptionally low activation energy ∼ 30 cal mol.

Fast motion of molecular rotors in metal-organic framework struts at very low temperatures.

The solid state is typically not well suited to sustaining fast molecular motion, but in recent years a variety of molecular machines, switches and rotors have been successfully engineered within porous crystals and on surfaces. Here we show a fast-rotating molecular rotor within the bicyclopentane-dicarboxylate struts of a zinc-based metal-organic framework-the carboxylate groups anchored to the metal clusters act as an axle while the bicyclic unit is free to rotate. The three-fold bipyramidal symmetry of the rotator conflicts with the four-fold symmetry of the struts within the cubic crystal cell of the zinc metal-organic framework.

Modulation of porosity in a solid material enabled by bulk photoisomerization of an overcrowded alkene.

The incorporation of photoswitchable molecules into solid-state materials holds promise for the fabrication of responsive materials, the properties of which can be controlled on-demand. However, the possible applications of these materials are limited due to the restrictions imposed by the solid-state environment on the incorporated photoswitches, which render the photoisomerization inefficient. Here we present responsive porous switchable framework materials based on a bistable chiroptical overcrowded alkene incorporated in the backbone of a rigid aromatic framework.

Visible-Light-Driven Rotation of Molecular Motors in a Dual-Function Metal-Organic Framework Enabled by Energy Transfer.

The visible-light-driven rotation of an overcrowded alkene-based molecular motor strut in a dual-function metal-organic framework (MOF) is reported. Two types of functional linkers, a palladium-porphyrin photosensitizer and a bispyridine-derived molecular motor, were used to construct the framework capable of harvesting low-energy green light to power the rotary motion. The molecular motor was introduced in the framework using the postsynthetic solvent-assisted linker exchange (SALE) method, and the structure of the material was confirmed by powder (PXRD) and single-crystal X-ray (SC-XRD) diffraction.

Engineering Porous Emitting Framework Nanoparticles with Integrated Sensitizers for Low-Power Photon Upconversion by Triplet Fusion.

The conversion of low-energy light into photons of higher energy based on sensitized triplet-triplet annihilation (sTTA) upconversion is emerging as the most promising wavelength-shifting methodology because it operates efficiently at excitation powers as low as the solar irradiance. However, the production of solid-state upconverters suited for direct integration in devices is still an ongoing challenge owing to the difficulties concerning the organization of two complementary moieties, the triplet sensitizer, and the annihilator, which must interact efficiently. This problem is solved by fabricating porous fluorescent nanoparticles wherein the emitters are integrated into robust covalent architectures.

Tight Xenon Confinement in a Crystalline Sandwich-like Hydrogen-Bonded Dimeric Capsule of a Cyclic Peptide.

A cyclic hexapeptide with three pyridyl moieties connected to its backbone forms a hydrogen-bonded dimer, which tightly encapsulates a single xenon atom, like a pearl in its shell. The dimer imprints its shape and symmetry to the captured xenon atom, as demonstrated by Xe NMR spectroscopy, single-crystal X-ray diffraction, and computational studies. The dimers self-assemble hierarchically into tubular structures to form a porous supramolecular architecture, whose cavities are filled by small molecules and gases.

A double helix of opposite charges to form channels with unique CO selectivity and dynamics.

Porous molecular materials represent a new front in the endeavor to achieve high-performance sorptive properties and gas transport. Self-assembly of polyfunctional molecules containing multiple charges, namely, tetrahedral tetra-sulfonate anions and bifunctional linear cations, resulted in a permanently porous crystalline material exhibiting tailored sub-nanometer channels with double helices of electrostatic charges that governed the association and transport of CO molecules. The charged channels were consolidated by robust hydrogen bonds.

Ultrafast Molecular Rotors and Their CO Tuning in MOFs with Rod-Like Ligands.

A metal organic framework (MOF) engineered to contain in its scaffold rod-like struts featuring ultrafast molecular rotors showed extremely rapid 180 ° flip reorientation with rotational rates of 10  Hz at 150 K. Crystal-pore accessibility of the MOF allowed the CO molecules to enter the cavities and control the rotor spinning speed down to 10  Hz at 150 K. Rotor dynamics, as modulated by CO loading/unloading in the porous crystals, was described by proton T and H NMR spectroscopy.

Molecular tectonics: gas adsorption and chiral uptake of (l)- and (d)-tryptophan by homochiral porous coordination polymers.

Combinations of two enantiomerically pure organic tectons 1 and 3 with either Zn(ii) or Cu(ii) cations lead to the formation of four homochiral 3D networks among which two, 1-Cu and 3-Cu, are robust porous crystals displaying homochiral cavities and permanent microporosity. 3-Cu porous crystals capture 66% and 20% of l- and d-tryptophan, respectively, after 30 min of adsorption.

Recognition of 1,3-Butadiene by a Porous Coordination Polymer.

The separation of 1,3-butadiene from C hydrocarbon mixtures is imperative for the production of synthetic rubbers, and there is a need for a more economical separation method, such as a pressure swing adsorption process. With regard to adsorbents that enable C gas separation, [Zn(NO ip)(dpe)] (SD-65; NO ip=5-nitroisophthalate, dpe=1,2-di(4-pyridyl)ethylene) is a promising porous material because of its structural flexibility and restricted voids, which provide unique guest-responsive accommodation. The 1,3-butadiene-selective sorption profile of SD-65 was elucidated by adsorption isotherms, in situ PXRD, and SSNMR studies and was further investigated by multigas separation and adsorption-desorption-cycle experiments for its application to separation technology.

Molecular Rotors Built in Porous Materials.

Molecules and materials can show dynamic structures in which the dominant mechanism is rotary motion. The single mobile elements are defined as "molecular rotors" and exhibit special properties (compared with their static counterparts), being able in perspective to greatly modulate the dielectric response and form the basis for molecular motors that are designed with the idea of making molecules perform a useful mechanical function. The construction of ordered rotary elements into a solid is a necessary feature for such design, because it enables the alignment of rotors and the fine-tuning of their steric and dipolar interactions.

Confined Polymerization in Highly Ordered Mesoporous Organosilicas.

Hybrid mesoporous organosilica exhibiting crystal-like order in the walls provided an ideal channel reaction vessel for the confined polymerization of acrylonitrile (PAN). The resulting high-molecular-mass PAN fills the channels at high yield and forms an ordered nanostructure of polymer nanobundles enclosed into the hybrid matrix. The in situ thermal transformation of PAN into rigid polyconjugated and, eventually, into condensed polyaromatic carbon nanofibers, retains the periodic architecture.

Microporous Molecular Materials from Dipeptides Containing Non-proteinogenic Residues.

Dipeptides with two hydrophobic side chains have proved to be an exceptional source of microporous organic materials, but since previous structures were limited to the incorporation of only proteinogenic residues, their full potential as adsorbents has remained unexplored. Single-crystal XRD data for ten new compounds with non-proteinogenic L-2-aminobutanoic acid and/or L-2-amino-pentanoic acid are presented. The gas-phase accessibility of their crystal pores, with cross-sections of 2.

Photoinduced reversible switching of porosity in molecular crystals based on star-shaped azobenzene tetramers.

The development of solid materials that can be reversibly interconverted by light between forms with different physico-chemical properties is of great interest for separation, catalysis, optoelectronics, holography, mechanical actuation and solar energy conversion. Here, we describe a series of shape-persistent azobenzene tetramers that form porous molecular crystals in their E-configuration, the porosity of which can be tuned by changing the peripheral substituents on the molecule. Efficient E→Z photoisomerization of the azobenzene units takes place in the solid state and converts the crystals into a non-porous amorphous melt phase.