Voltammetric methodology for the quality control and monitoring of sulfamethoxazole removal from water.

Sulfamethoxazole is an antibiotic that is among the drugs most frequently found in waters around the world because of its habitual consumption and its high chemical stability that prevents it from being eliminated from the environment. In this study, an electroanalytical methodology based on differential pulse voltammetry is developed for the analysis of sulfamethoxazole at trace levels in water. After the optimization of the instrumental parameters a linear range from 6.

Iron metal-organic framework nanofiber membrane for the integration of electro-Fenton and effective continuous treatment of pharmaceuticals in water.

In this study, an iron metal-organic framework (Fe-MOF) was synthesized and immobilized by electrospinning technique with the objective of obtaining a membrane composed of nanofibers of this material (Fe-MOF nanofiber membrane). The characterization performed by XRD, TEM, SEM, EDS mapping and FTIR confirmed the correct synthesis of Fe-MOF as well as its correct retention in the elaborated membranes. The usefulness and effectiveness of the Fe-MOF nanofiber membrane as a catalyst for the electro-Fenton process was evaluated by performing sulfamethoxazole degradation tests.

Antidepressants and COVID-19: Increased use, occurrence in water and effects and consequences on aquatic environment. A review.

The COVID-19 pandemic changed the consumption of many drugs, among which antidepressants stand out. This review evaluated the frequency of antidepressant use before and after COVID-19. Once the most consumed antidepressants were identified, detecting a variation in the frequency of consumption on the different continents, an overview of their life cycle was carried out, specifying which antidepressants are mostly detected and the places where there is a greater concentration.

One-pot synthesis of bimetallic Fe-Cu metal-organic frameworks composite for the elimination of organic pollutants via peroxymonosulphate activation.

A series of bimetallic of FeCu metal-organic frameworks (MOFs) have been synthesised using a solvothermal process by varying the ratio between the two metals. Further, the bimetallic MOF catalysts were characterised by X-ray powder diffraction, scanning electron microscopy, and infrared spectroscopy techniques. Their catalytic properties for activation of peroxymonosulphate (PMS) have been tested by the removal of a model dye, rhodamine B.

From Waste to Resource: Valorization of Lignocellulosic Agri-Food Residues through Engineered Hydrochar and Biochar for Environmental and Clean Energy Applications-A Comprehensive Review.

Agri-food residues or by-products have increased their contribution to the global tally of unsustainably generated waste. These residues, characterized by their inherent physicochemical properties and rich in lignocellulosic composition, are progressively being recognized as valuable products that align with the principles of zero waste and circular economy advocated for by different government entities. Consequently, they are utilized as raw materials in other industrial sectors, such as the notable case of environmental remediation.

Nanostructured copper-organic frameworks for the generation of sulphate radicals: application in wastewater disinfection.

In recent years, the presence of pathogens in the environment has become an issue of widespread concern in society. Thus, new research lines have been developed regarding the removal of pathogens and persistent pollutants in water. In this research, the efficacy of nanostructure copper-organic framework, HKUST-1, has been evaluated for its ability to eliminate Escherichia coli and generate sulphate radicals as catalyst for the treatment of effluents with a high microbiological load via peroxymonosulphate (PMS) activation.

Heterogeneous electro-Fenton system using Fe-MOF as catalyst and electrocatalyst for degradation of pharmaceuticals.

In recent years, heterogeneous electro-Fenton processes have gained considerable attention as an alternative to homogeneous processes. In this context, the aim of this study is the use of a commercial iron metal-organic framework (Fe-MOF), Basolite® F-300, as a base material for the design of a heterogeneous electro-Fenton treatment system for the removal of antipyrine. Initially, the catalyst was applied as powder in aqueous solution and three key parameters of the electro-Fenton process (pH, Fe-MOF concentration and current density) were evaluated and optimized by a Central Composite Design Face Centred (CCD-FC) using antipyrine removal and energy consumption as response functions.

Laccase multi-point covalent immobilization: characterization, kinetics, and its hydrophobicity applications.

Laccase from Myceliophthora thermophila was immobilized using one-point and multi-point covalent attachment on both a native and a modified new commercial epoxy carrier (Immobead 150P). After 10 cycles of operation at pH 3.0 and temperature 70 °C, the multi-point covalently immobilized laccase on the modified Immobead 150P performed best in terms of immobilization characteristics, retaining 95% of its initial activity.

Photocatalytic solid-phase degradation of polyethylene with fluoride-doped titania under low consumption ultraviolet radiation.

Photodegradation of plastic in solid-phase requires the polymer to be composited with an efficient photocatalyst. We report herein the successful synthesis and characterization of fluoride-doped-TiO and its applicability, for the first time, on solid-phase photodegradation of polyethylene films. Nearly half weight loss of polyethylene, containing only 2% of the photocatalyst, is eliminated after three weeks of ultraviolet A radiation using a low consumption light emitting diode lamp, defeating previously reported data.

GO-TiO as a Highly Performant Photocatalyst Maximized by Proper Parameters Selection.

The synthesis and characterization of novel graphene oxide coupled to TiO (GO-TiO) was carried out in order to better understand the performance of this photocatalyst, when compared to well-known TiO (P25) from Degussa. Thus, its physical-chemical characterization (FTIR, XRD, N isotherms and electrochemical measurements) describes high porosity, suitable charge and high electron mobility, which enhance pollutant degradation. In addition, the importance of the reactor set up was highlighted, testing the effect of both the irradiated area and distance between lamp and bulb solution.

Disinfection through Advance Oxidation Processes: Optimization and Application on Real Wastewater Matrices.

Disinfection is an essential and significant process for water treatment to protect the environment and human beings from pathogenic infections. In this study, disinfection through the generation of hydroxyl (Fenton process (FP)) and sulfate (Fenton-like process (FLP)) radicals was validated and optimized. The optimization was carried out in synthetic water through an experimental design methodology using the bacteria as a model microorganism.

Peroxymonosulphate Activation by Basolite F-300 for Disinfection and Antipyrine Degradation.

In this study, the removal of persistent emerging and dangerous pollutants (pharmaceuticals and pathogens) in synthetic wastewater was evaluated by the application of heterogeneous Advanced Oxidation Processes. To do that, a Metal-Organic Framework (MOF), Basolite F-300 was selected as a catalyst and combined with peroxymonosulfate (PMS) as oxidants in order to generate sulphate radicals. Several key parameters such as the PMS and Basolite F-300 concentration were evaluated and optimized using a Central Composite Experimental Design for response surface methodology for the inactivation of .

Electro-reversible adsorption as a versatile tool for the removal of diclofenac from wastewater.

In this study, adsorption of a non-steroidal anti-inflammatory drug such as Diclofenac (DCF) on a commercial carbonaceous aerogel honeycomb monolith (NANOLIT®-NQ40) was ascertained. Based on, the overall design of an adsorption treatment should include a feasible regeneration process for the spent adsorbent. In this work, the adsorption/desorption process was ameliorated by coupling of electrochemical technology (anodic/cathodic polarisation).

ZnFeO-chitosan magnetic beads for the removal of chlordimeform by photo-Fenton process under UVC irradiation.

A simple protocol was proposed for the preparation of magnetic chitosan beads ZnFeO-CS via a co-precipitation method. The use of synthesized magnetic ZnFeO-CS beads as catalyst for the heterogeneous photo-Fenton treatment of chlordimeform insecticide (CDM) was evaluated. The photo-Fenton experiments were carried out with different synthesized catalysts by varying the molar ratio Zn/Fe in chitosan beads, the catalyst concentration and pH.

An approach towards Zero-Waste wastewater technology: Fluoxetine adsorption on biochar and removal by the sulfate radical.

The appearance of pharmaceuticals in the aquatic environments has become a serious problem because of their hazardous effect on the biota. Therefore, great efforts are focussed in the removal to these pollutants from wastewaters. In this study, an innovative technology based on the principles of Zero-Waste for the management of wastewater streams is presented.

Setting the Foundations of Aqueous Three-Phase Systems (A3PS) in the Quest for a Rational Design.

This work presents the first in-depth study of Aqueous Three-Phase Systems (A3PS) with the main purpose of unveiling their behaviour, hence contributing to the development of this new field. Thus, a complete definition of a quaternary system was carried through by describing all the regions in detail to represent them later on in a regular-tetrahedral diagram. The three aqueous faces of the tetrahedron demonstrated an undeviating influence in the segregation capacity.

Green Binder Based on Enzymatically Polymerized Eucalypt Kraft Lignin for Fiberboard Manufacturing: A Preliminary Study.

The capability of laccase from to drive oxidative polymerization of Kraft lignin (KL) was studied as a previous step before applying this biotechnological approach for the manufacturing of medium-density fiberboards (MDF) at a pilot scale. This method, which improves the self-bonding capacity of wood fibers by lignin enzymatic cross-linking, mimics the natural process of lignification in living plants and trees. An interesting pathway to promote these interactions could be the addition of lignin to the system.

Current advances and trends in electro-Fenton process using heterogeneous catalysts - A review.

Over the last decades, advanced oxidation processes have often been used alone, or combined with other techniques, for remediation of ground and surface water pollutants. The application of heterogeneous catalysis to electrochemical advanced oxidation processes is especially useful due to its efficiency and environmental safety. Among those processes, electro-Fenton stands out as the one in which heterogeneous catalysis has been broadly applied.

Kaolinite adsorption-regeneration system for dyestuff treatment by Fenton based processes.

The regeneration and reuse of adsorbents is a subject of interest nowadays in order to reduce the pollution and the wastes generated in the adsorption wastewater treatment. In this work, the regeneration of the spent kaolinite by different advanced oxidation processes (Fenton, electro-Fenton and electrokinetic-Fenton) was evaluated. Initially, it was confirmed the ability of a low cost clayey material, kaolinite, for the adsorption of model dye such as Rhodamine B showing Freundlich isotherm fitting.

Immobilization of laccase of Pycnoporus sanguineus CS43.

Laccase from Pycnoporus sanguineus CS43 was successfully immobilized onto Immobead-150 and Eupergit-C by covalent binding and by entrapment in LentiKats. The highest immobilization was onto Immobead-150 (97.1±1.

Scaling-up and ionic liquid-based extraction of pectinases from Aspergillus flavipes cultures.

The viability of the scaling-up of pectinases production by Aspergillus flavipes at 5L-bioreactor scale has been demonstrated by keeping constant the power input, and a drastic increase in the endo- and exopectinolytic enzyme production was recorded (7- and 40-fold, respectively). The main process variables were modelled by means of logistic and Gompertz equations. In order to overcome the limitations of the conventional downstream strategies, a novel extraction strategy was proposed on the basis of the adequate salting-out potential of two biocompatible cholinium-based ionic liquids (NCl and NHPO) in aqueous solutions of Tergitol, reaching more than 90% of extraction.

Elimination of radiocontrast agent diatrizoic acid by photo-Fenton process and enhanced treatment by coupling with electro-Fenton process.

The removal of radiocontrast agent diatrizoic acid (DIA) from water was performed using photo-Fenton (PF) process. First, the effect of H2O2 dosage on mineralization efficiency was determined using ultraviolet (UV) irradiation. The system reached a maximum mineralization degree of 60 % total organic carbon (TOC) removal at 4 h with 20 mM initial H2O2 concentration while further concentration values led to a decrease in TOC abatement efficiency.

Electrocoagulation: Simply a Phase Separation Technology? The Case of Bronopol Compared to Its Treatment by EAOPs.

Electrocoagulation (EC) has long been considered a phase separation process, well suited for industrial wastewater treatment since it causes a quick, drastic decay of organic matter content. This research demonstrates that EC also behaves, at least for some molecules like the industrial preservative bronopol, as an effective transformation technology able to yield several breakdown products. This finding has relevant environmental implications, pointing to EC as a greener process than described in literature.

Electrokinetic-Fenton technology for the remediation of hydrocarbons historically polluted sites.

The feasibility of the electrokinetic-Fenton technology coupled with surfactants in the treatment of real historically hydrocarbons polluted soils has been studied. The characterisation of these soils from Spain and Romania was performed and identified as diesel and diesel-motor oil spillages, respectively. Moreover, the ageing of the spillages produced by the soil contamination was estimated showing the historical pollution of the sites (around 11 and 20 years for Romanian and Spanish soils, respectively).

A grey box model of glucose fermentation and syntrophic oxidation in microbial fuel cells.

In this work, the fermentative and oxidative processes taking place in a microbial fuel cell (MFC) fed with glucose were studied and modeled. The model accounting for the bioelectrochemical processes was based on ordinary, Monod-type differential equations. The model parameters were estimated using experimental results obtained from three H-type MFCs operated at open or closed circuits and fed with glucose or ethanol.