Pollution of the environment and building interiors during asbestos removal as a result of lack of negative pressure in the working areas.

The paper presents examples of the consequences of the lack of negative pressure in the work zone during asbestos removal. The asbestos fibre concentrations generated in those work zones were relatively low. This was due to the leakage in barriers restricting the work zone.

Comparison of the effects of use, protection, improper renovation and removal of asbestos products on the example of typical old office buildings in Poland.

The study focused on old, German building types "LIPSK" and "BERLIN" used in Poland, since the 1960s in Eastern Europe. The different operations on buildings were analysed: protection and maintenance of asbestos products, asbestos removal and inadvertent damage to asbestos as a result of building renovation. Measurements of respirable (countable) asbestos fibres in the air were carried out using the PCOM + PLM method and SEM-EDS.

Asbestos cement products and their impact on soil contamination in relation to various sources of anthropogenic and natural asbestos pollution.

The results of a quantitative analysis of asbestos content in the ground with varying degrees of concentration of this mineral as a result of natural phenomena such as rock weathering, contamination by the manufacture of asbestos and cement products, and the many years of use of "eternit roofs" are presented. Preliminary thermal treatment, soil grinding and sieving were used for the determinations, followed by electrostatic separation in order to obtain the concentration of asbestos in a smaller volume. It was used for microscopic preparations for the identification and planimetry of asbestos.

The natural reduction of threat in selected systems of old buildings containing asbestos.

The aim of this study was to measure changes in asbestos dust concentrations over extended use in old building systems. Buildings from different systems during their service lifetimes and after asbestos removal were tested. Asbestos dust concentrations decreased in all building systems due to air exchange and other phenomena in the absence of new active dust sources.