Performance of a Flow-Through Enzyme Reactor Prepared from a Silica Monolith and an α-Poly(D-Lysine)-Enzyme Conjugate.

Horseradish peroxidase (HRP) is covalently bound in aqueous solution to polycationic α-poly(D-lysine) chains of ≈1000 repeating units length, PDL, via a bis-aryl hydrazone bond (BAH). Under the experimental conditions used, about 15 HRP molecules are bound along the PDL chain. The purified PDL-BAH-HRP conjugate is very stable when stored at micromolar HRP concentration in a pH 7.

Controllable Enzyme Immobilization via Simple and Quantitative Adsorption of Dendronized Polymer-Enzyme Conjugates Inside a Silica Monolith for Enzymatic Flow-Through Reactor Applications.

Although many different methods are known for the immobilization of enzymes on solid supports for use in flow-through applications as enzyme reactors, the reproducible immobilization of predetermined amounts of catalytically active enzyme molecules remains challenging. This challenge was tackled using a macro- and mesoporous silica monolith as a support and dendronized polymer-enzyme conjugates. The conjugates were first prepared in an aqueous solution by covalently linking enzyme molecules and either horseradish peroxidase (HRP) or bovine carbonic anhydrase (BCA) along the chains of a water-soluble second-generation dendronized polymer using an established procedure.

Immobilization of the Highly Active UDP-Glucose Pyrophosphorylase From Provides a Highly Efficient Biocatalyst for the Production of UDP-Glucose.

Biocatalysis that produces economically interesting compounds can be carried out by using free enzymes or microbial cells. However, often the cell metabolism does not allow the overproduction or secretion of activated sugars and thus downstream processing of these sugars is complicated. Here enzyme immobilization comes into focus in order to stabilize the enzyme as well as to make the overall process economically feasible.

Leloir Glycosyltransferases in Applied Biocatalysis: A Multidisciplinary Approach.

Enzymes are nature's catalyst of choice for the highly selective and efficient coupling of carbohydrates. Enzymatic sugar coupling is a competitive technology for industrial glycosylation reactions, since chemical synthetic routes require extensive use of laborious protection group manipulations and often lack regio- and stereoselectivity. The application of Leloir glycosyltransferases has received considerable attention in recent years and offers excellent control over the reactivity and selectivity of glycosylation reactions with unprotected carbohydrates, paving the way for previously inaccessible synthetic routes.

Stable Immobilization of Enzymes in a Macro- and Mesoporous Silica Monolith.

Horseradish peroxidase isoenzyme C (HRP) and proteinase K (proK) were immobilized inside macro- and mesoporous silica monoliths. Stable immobilization was achieved through simple noncovalent adsorption of conjugates, which were prepared from a polycationic, water-soluble second generation dendronized polymer (denpol) and the enzymes. Conjugates prepared from three denpols with the same type of repeating unit (r.

Covalently immobilized lipase on aminoalkyl-, carboxy- and hydroxy-multi-wall carbon nanotubes in the enantioselective synthesis of Solketal esters.

Aiming at the preparation of efficient, stable on storage and recyclable nanobiocatalysts for enantioselective transesterification, alkaline lipase from Pseudomonas fluorescens was covalently immobilized (up to 8.5wt.%) on functionalized multi-wall carbon nanotubes (f-MWCNTs).

Rapid continuous microwave-assisted synthesis of silver nanoparticles to achieve very high productivity and full yield: from mechanistic study to optimal fabrication strategy.

Systematic studies of silver nanoparticle synthesis in a continuous-flow single-mode microwave reactor using polyol process were performed, revealing that the synthesis is exceptionally effective to give very small metal particles at full reaction yield and very high productivity. Inlet concentration of silver nitrate or silver acetate, applied as metal precursors, varied between 10 and 50 mM, and flow rates ranged from 0.635 to 2.

Screening of lipase carriers for reactions in water, biphasic and pure organic solvent systems.

In bioprocesses lipases are typically used in immobilized form, irrespective of type of reaction systems, to ensure an even distribution of catalysts in water restricted media and/or to facilitate separation and reuse. In these studies we report on the selection of appropriate enzyme-carrier preparation for hydrolysis reaction in aqueous and biphasic systems and transesterification in organic solvent. For this Candida rugosa lipase was bound by adsorption or covalent attachment onto various carriers to give 24 preparations.

Immobilization of an integral membrane protein for biotechnological phenylacetaldehyde production.

Styrene oxide isomerase (SOI) has previously been shown to be an integral membrane protein performing a highly selective, hydrolytic ring opening reaction of epoxides to yield pure aldehydes. Earlier studies had also shown a high sensitivity of SOIs toward their product phenylacetaldehyde which caused an irreversible inhibition and finally complete loss of activity at higher aldehyde concentrations. Here we report on the covalent immobilization of a styrene oxide isomerase (SOI) on SBA-15 silica carriers.

Alkaline lipase from Pseudomonas fluorescens non-covalently immobilised on pristine versus oxidised multi-wall carbon nanotubes as efficient and recyclable catalytic systems in the synthesis of Solketal esters.

In order to produce effective and recyclable catalysts for enantioselective transesterification in the industrial applications, alkaline lipase from Pseudomonas fluorescens was non-covalently immobilised (ca. 6 wt%) on pristine multi-wall carbon nanotubes (MWCNTs) and oxidised MWCNTs (O-MWCNTs) using an adsorption technique. Mesoporous silica modified with n-octyl groups was used as a reference support.

Very stable silica-gel-bound laccase biocatalysts for the selective oxidation in continuous systems.

Cerrena unicolor laccase was immobilized by adsorption and covalent bonds formation on silica-gel carriers, functionalized with different organosilanes and surface densities. The effects of protein concentration, pH value of the coupling mixture and the enzyme purity on immobilization efficiency of the best carrier, moderately modified (0.75 mmol/g carrier) with 3-aminopropyltriethoxysilane were investigated.

FTIR spectroscopic study of titanium-containing mesoporous silicate materials.

The surface acidity of different mesoporous titanium-silicates, such as well-organized hexagonally packed Ti-MMM, Ti-MMM-2, Ti-SBA-15, and amorphous TiO(2)-SiO(2) mixed oxides (aerogels and xerogels), was studied by means of FTIR spectroscopy of CO adsorbed at 80 K and CD(3)CN adsorbed at 293 K. The surface hydroxyl groups of mesoporous titanium-silicates with 2-7 wt % Ti revealed a Brönsted acidity slightly higher to that of pure silicate. TiO(2)-SiO(2) xerogels revealed the highest Brönsted acidity among the titanium-silicates studied.

Preparation and surface properties of low-density gels synthesized using prepolymerized silica precursors.

Properties of silica xerogels and aerogels synthesized using a number of prepolymerized silica precursors were probed by 29Si magic-angle spinning (MAS) NMR spectroscopy, the small-angle X-ray scattering (SAXS) method, the nitrogen adsorption method, and transmission electron microscopy (TEM) to show that xerogels with attractive textural properties can easily be prepared using this type of precursors and the conventional one-step, base procedure. Pore sizes and overall pore volumes in these materials can be notably larger than those in the corresponding materials synthesized using tetraethoxysilane. This positive effect stems from the stronger structure of the polymeric network due to a higher degree of silica condensation on one side and a larger thickness of polymeric chains on the other.