Heat Treatment of Corrosion Resistant Steel for Water Propellers Fabricated by Direct Laser Deposition.

The urgency of heat treatment of samples of maraging steel obtained by direct laser deposition from steel powder 06Cr15Ni4CuMo is considered. The structural features and properties of 06Cr15Ni4CuMo steel samples after direct laser deposition and heat treatment are studied. The work is devoted to research into the influence of thermal processing on the formation of structure and the mechanical properties of deposit samples.

Structure and Properties of ZrO₂⁻20%Al₂O₃ Ceramic Composites Obtained Using Additive Technologies.

This investigation focused on obtaining samples from ceramic composite materials, based on the ZrO₂⁻20%Al₂O₃ system, using the additive layer-by-layer fusion technology for thermoplastic systems. The structure and phase composition of the initial powders were studied, experimental samples were produced, and the structure and properties of the experimental samples that were obtained using additive technologies were analysed. The measured static bending strength of the samples was 450 ± 70 MPa, microhardness was 14 GPa, and the elasticity modulus was 280 ± 25 GPa.