Publications by authors named "Andrew Padalhin"

During the healing process after intra-nasal surgery, the growth and repair of damaged tissues can result in the development of postoperative adhesions. Various techniques have been devised to minimize the occurrence of postoperative adhesions which include insertion of stents in the middle meatus, application of removable nasal packing, and utilizing biodegradable materials with antiadhesive properties. This study assesses the efficacy of two sodium hyaluronate (SH)-based freeze-dried hydrogel composites in preventing postoperative nasal adhesions, comparing them with commonly used biodegradable materials in nasal surgery.

View Article and Find Full Text PDF

This study investigates the efficacy of a thermo-responsive N-acetylcysteine (NAC) hydrogel on wound healing and oral ulcer recovery. Formulated by combining NAC with methylcellulose, the hydrogel's properties were assessed for temperature-induced gelation and cell viability using human fibroblast cells. In vivo experiments on Sprague Dawley rats compared the hydrogel's effects against saline, NAC solution, and a commercial NAC product.

View Article and Find Full Text PDF

Background: Oral ulcers are a common side effect of chemotherapy and affect patients' quality of life. While stem cell transplantation is a potential treatment for oral ulcers, its efficacy is limited as the stem cells tend to remain in the affected area for a short time. This study aims to develop a treatment for oral ulcers by using trimethyl chitosan (TMC) hydrogel with human tonsil-derived stem cells (hTMSCs) to increase the therapeutic effect of stem cells and investigate their effectiveness.

View Article and Find Full Text PDF

Wound management practices have made significant advancements, yet the search for improved antiseptics persists. In our pursuit of solutions that not only prevent infections but also address broader aspects of wound care, we investigated the impact of integrating trimethyl chitosan (TMC) into a widely used poly(vinylpyrrolidone)-iodine gel (PVP-I gel). Our study assessed the antimicrobial efficacy of the PVP gel with TMC against , , multidrug-resistant MRSA, and .

View Article and Find Full Text PDF

The submandibular gland (SMG) produces the most saliva, and factors such as aging and chemotherapy can affect its structure and function. However, there are only temporary treatments available for salivary hypofunction. This study aimed to evaluate the effects of photobiomodulation (PBM) on the function of SMG by using a rat animal model and vismodegib, an antagonist of the sonic hedgehog (SHH) pathway.

View Article and Find Full Text PDF

In this study, the effect of photobiomodulation (PBM) treatment using 630 nm light emitting diode (LED) array (continuous wave type, 10 mW power) on tonsil-derived mesenchymal stem cells (TMSCs) and its interaction with RAW 264.7 macrophage cells via co-culture in vitro were investigated. PBM treatment was used as a priming method for TMSCs to improve therapeutic efficacy.

View Article and Find Full Text PDF

This study investigated photobiomodulation (PBM) effects in Sonic hedgehog (Shh) signaling as a potential approach to taste preservation and regeneration. Primary taste cell (TC) cultures were treated with Shh antagonist vismodegib and irradiated using a continuous wave type 630 nm light-emitting diode (10 mW/cm ) array, with single or multiple doses of 30 J/cm to determine dose inducing significant upregulation effect. Shh, Ptch, Smo, and Gli1 were significantly upregulated at 120 J/cm , used as the minimum dose in vivo.

View Article and Find Full Text PDF

Background: Numerous studies have noted the effect of chorda tympani (CT) nerve transection on taste sensitivity yet very few have directly observed its effects on taste receptor and taste signaling protein expressions in the tongue tissue.

Methods: In this study, bilateral CT nerve transection was performed in adult Sprague Dawley rats after establishing behavioral taste preference for sweet, bitter, and salty taste short term two-bottle preference testing using a lickometer setup. Taste preference for all animals were subsequently monitored.

View Article and Find Full Text PDF

At a time of unpredictable challenges for health, one trend is certain: there is an exceedingly high demand for functional implants, particularly bone grafts. This has encouraged the emergence of bone tissue engineering substitutes as an alternative method to conventional bone grafts. However, the current approaches in the field face several limitations that have prevented the ultimate translation into clinical settings.

View Article and Find Full Text PDF

Lavage or irrigation has been instilled in surgical practice for wound clearance and surgical site infection prevention during and after surgery. Herein, we developed a new irrigation solution using trimethyl chitosan (TMC), a quaternized chitosan derivative. The TMC-saline irrigation solution developed in the study possesses highly effective bactericidal properties with hemostatic and anti-adhesion properties.

View Article and Find Full Text PDF

Objectives: The effect of photobiomodulation (PBM) treatment on wound healing and macrophage polarization was investigated in vivo. Animal models of oral ulcers were simulated through chemically induced oral ulcers in rats.

Materials And Methods: PBM treatment using an infrared pulsed laser was used to treat oral ulcers in the animal models.

View Article and Find Full Text PDF

Implants for bone regeneration to remedy segmental bone defects, osteomyelitis, necrotic bone tissue and non-union fractures have worldwide appeal. Although biomaterials offer most of the advantages by improving tissue growth but developments are more commonly achieved biologically derived molecules. To aid site specific bone tissue regeneration by synthetic scaffold, cell derived extracellular matrix (ECM) can be a crucial component.

View Article and Find Full Text PDF

Extracellular matrix (ECM) contains a wide array of complex proteins, growth factors and cytokines that regulate cell behavior and tissue development. ECM harvested from non-homologous ECM sources still provide a structural support and biochemical cues to cells for effective tissue remodeling. The aim of this study is to evaluate the effect of non-tissue specific decellularized ECM from porcine dermis loaded with biphasic calcium phosphate powder (BCP) in bone regeneration.

View Article and Find Full Text PDF

The objective of this study was to fabricate multichannel biphasic calcium phosphate (BCP) and β-tricalcium phosphate (TCP) bone substitutes and compare their long-term biodegradation and bone regeneration potentials. Multi-channel BCP and TCP scaffolds were fabricated by multi-pass extrusion process. Both scaffolds were cylindrical with a diameter of 1-mm, a length of 1-mm, and seven interconnected channels.

View Article and Find Full Text PDF

Effective removal of cellular components while retaining extracellular matrix (ECM) proteins is the ultimate goal of decellularization. The aim of this study is to produce a decellularized ECM with highly preserved ECM proteins and to determine the effect of isopropanol as a decellularization solvent on the characteristics of the decellularized porcine skin. Two different protocols were used for porcine skin decellularization.

View Article and Find Full Text PDF

Bioglass-calcium phosphate cement (CPC) composite materials have recently received increased attention for bone regeneration purposes, owing to their improved properties in term of biocompatibility and bone ingrowths. In this study, an injectable bone substitute (IBS) system which utilizes bioglass microspheres incorporated into brushite based cement, was evaluated. The microspheres were synthesized with a simple and low sintering temperature process; there was no significant phase difference shown from the powder and good interactivity with cells was obtained.

View Article and Find Full Text PDF

Composite microspheres have been widely investigated over the years in order to achieve a sound scaffold with suitable combinations of biodegradable polymers and bioactive ceramics/glasses for bone tissue engineering. In our present study, composite microspheres were prepared for the first time by agarose (1 wt %) enforcement with combination of biphasic calcium phosphate (BCP; 20 wt %) and calcium sulfate dehydrate (CSD; 20 wt %), and analyzed for use in bone regeneration. The one-step fabrication process revealed spheres of sizes ranging from 50 to 1000 μm of BCP-CSD contents effectively formed by natural solidification of agarose matrix, which is very simple, time and cost-effective, and could allow for large scale production.

View Article and Find Full Text PDF

Calcium phosphate brushite type of cements have been used to replace bone graft materials because of their biocompatibility and other attractive features. Especially, injectability of cement allows easy handling of minimally invasive surgical techniques. New calcium phosphate cement (CPC) system, brushite based cement incorporated into polyelectrolyte complex, was developed in this study.

View Article and Find Full Text PDF

The aim of the study was to determine the hemostatic activity of a composite bi-layered topical hemostat composed of electrospun gelatin loaded with bi-phasic calcium phosphate and chitosan layer and its effect on bone formation. Morphology of the composite hemostat and its individual components were observed using scanning electron microscopy. In vitro biocompatibility of the topical hemostat tested using preosteoblasts cells (MC3t3-E1) showed no adverse toxicity.

View Article and Find Full Text PDF

The present work addresses the performance of polycaprolactone (PCL) coating on fluoride treated (MgF2) biodegradable ZK60 magnesium alloy (Mg) for biomedical application. MgF2 conversion layer was first produced by immersing Mg alloy substrate in hydrofluoric acid solution. The outer PCL coating was then prepared using dip coating technique.

View Article and Find Full Text PDF

Background: Magnesium (Mg)-based alloys are considered to be promising materials for implant application due to their excellent biocompatibility, biodegradability, and mechanical properties close to bone. However, low corrosion resistance and fast degradation are limiting their application. Mg-Ca alloys have huge potential owing to a similar density to bone, good corrosion resistance, and as Mg is essential for Ca incorporation into bone.

View Article and Find Full Text PDF

An ideal bone substitute should be made of biocompatible materials that mimic the structure, characteristics, and functions of natural bone. Many researchers have worked on the fabrication of different bone scaffold systems including ceramic-polymer hybrid system. In the present study, we incorporated hyaluronic acid-gelatin hydrogel to micro-channeled biphasic calcium phosphate granules as a carrier to improve cell attachment and proliferation through highly interconnected porous structure.

View Article and Find Full Text PDF