Quantifying short-range order using atom probe tomography.

Medium- and high-entropy alloys are an emerging class of materials that can exhibit outstanding combinations of strength and ductility for engineering applications. Computational simulations have suggested the presence of short-range order (SRO) in these alloys, and recent experimental evidence is also beginning to emerge. Unfortunately, the difficulty in quantifying the SRO under different heat treatment conditions has generated much debate on the atomic preferencing and implications of SRO on mechanical properties.

Characterising the performance of an ultrawide field-of-view 3D atom probe.

The CAMECA Invizo 6000 atom probe microscope uses ion optics that differ significantly from the local electrode atom probe (LEAP). It uses dual antiparallel deep ultraviolet lasers, a flat counter electrode, and a series of accelerating and decelerating lenses to increase the field-of-view of the specimen without reducing the mass resolving power. In this work we characterise the performance of the Invizo 6000 using three material case studies: a model Al-Mg-Si alloy, a commercially-available Ni-based superalloy, and a Zr alloy, using a combination of air and vacuum-transfer between instruments.

Exploration of atom probe tomography at sub-10K.

The operating temperature is a critical parameter in atom probe tomography experiments. It affects the spatial precision, mass resolving power and other key aspects of the field-evaporation process. Current commercially available atom probes operate at a minimum temperature of ∼25 K when measured at the specimen.

A Crystallography-Mediated Reconstruction (CMR) Approach for Atom Probe Tomography: Solution for a Singleton Pole.

Spatially accurate atom probe tomography reconstructions are vitally important when quantitative spatial measurements such as distances, volumes and morphologies etc. of nanostructural features are required information for the researcher. It is well known that the crystallographic information contained within the atom probe data of crystalline materials can be used to calibrate the tomographic reconstruction.

Integrative Atom Probe Tomography Using Scanning Transmission Electron Microscopy-Centric Atom Placement as a Step Toward Atomic-Scale Tomography.

Current reconstruction methodologies for atom probe tomography (APT) contain serious geometric artifacts that are difficult to address due to their reliance on empirical factors to generate a reconstructed volume. To overcome this limitation, a reconstruction technique is demonstrated where the analyzed volume is instead defined by the specimen geometry and crystal structure as determined by transmission electron microscopy (TEM) and diffraction acquired before and after APT analysis. APT data are reconstructed using a bottom-up approach, where the post-APT TEM image is used to define the substrate upon which APT detection events are placed.

Quantification Challenges for Atom Probe Tomography of Hydrogen and Deuterium in Zircaloy-4.

Analysis and understanding of the role of hydrogen in metals is a significant challenge for the future of materials science, and this is a clear objective of recent work in the atom probe tomography (APT) community. Isotopic marking by deuteration has often been proposed as the preferred route to enable quantification of hydrogen by APT. Zircaloy-4 was charged electrochemically with hydrogen and deuterium under the same conditions to form large hydrides and deuterides.

The Laplace Project: An integrated suite for preparing and transferring atom probe samples under cryogenic and UHV conditions.

We present sample transfer instrumentation and integrated protocols for the preparation and atom probe characterization of environmentally-sensitive materials. Ultra-high vacuum cryogenic suitcases allow specimen transfer between preparation, processing and several imaging platforms without exposure to atmospheric contamination. For expedient transfers, we installed a fast-docking station equipped with a cryogenic pump upon three systems; two atom probes, a scanning electron microscope / Xe-plasma focused ion beam and a N2-atmosphere glovebox.

Machine-learning-based atom probe crystallographic analysis.

Atom probe tomography is known for its accurate compositional analysis at the nanoscale. However, the patterns created by successive hits on the single particle detector during experiments often contain complementary information about the specimen's crystallography, including structure and orientation. This information remains in most cases unexploited because it is, up to now, retrieved predominantly manually.

On the retrieval of crystallographic information from atom probe microscopy data via signal mapping from the detector coordinate space.

Atom probe tomography is a powerful microscopy technique capable of reconstructing the 3D position and chemical identity of millions of atoms within engineering materials, at the atomic level. Crystallographic information contained within the data is particularly valuable for the purposes of reconstruction calibration and grain boundary analysis. Typically, analysing this data is a manual, time-consuming and error prone process.

Correlating Atom Probe Crystallographic Measurements with Transmission Kikuchi Diffraction Data.

Correlative microscopy approaches offer synergistic solutions to many research problems. One such combination, that has been studied in limited detail, is the use of atom probe tomography (APT) and transmission Kikuchi diffraction (TKD) on the same tip specimen. By combining these two powerful microscopy techniques, the microstructure of important engineering alloys can be studied in greater detail.

Breaking the icosahedra in boron carbide.

Findings of laser-assisted atom probe tomography experiments on boron carbide elucidate an approach for characterizing the atomic structure and interatomic bonding of molecules associated with extraordinary structural stability. The discovery of crystallographic planes in these boron carbide datasets substantiates that crystallinity is maintained to the point of field evaporation, and characterization of individual ionization events gives unexpected evidence of the destruction of individual icosahedra. Statistical analyses of the ions created during the field evaporation process have been used to deduce relative atomic bond strengths and show that the icosahedra in boron carbide are not as stable as anticipated.

Linking stress-driven microstructural evolution in nanocrystalline aluminium with grain boundary doping of oxygen.

The large fraction of material residing at grain boundaries in nanocrystalline metals and alloys is responsible for their ultrahigh strength, but also undesirable microstructural instability under thermal and mechanical loads. However, the underlying mechanism of stress-driven microstructural evolution is still poorly understood and precludes rational alloy design. Here we combine quantitative in situ electron microscopy with three-dimensional atom-probe tomography to directly link the mechanics and kinetics of grain boundary migration in nanocrystalline Al films with the excess of O atoms at the boundaries.

Restoring the lattice of Si-based atom probe reconstructions for enhanced information on dopant positioning.

The following manuscript presents a novel approach for creating lattice based models of Sb-doped Si directly from atom probe reconstructions for the purposes of improving information on dopant positioning and directly informing quantum mechanics based materials modeling approaches. Sophisticated crystallographic analysis techniques are used to detect latent crystal structure within the atom probe reconstructions with unprecedented accuracy. A distortion correction algorithm is then developed to precisely calibrate the detected crystal structure to the theoretically known diamond cubic lattice.

Resolving the morphology of niobium carbonitride nano-precipitates in steel using atom probe tomography.

Atom probe is a powerful technique for studying the composition of nano-precipitates, but their morphology within the reconstructed data is distorted due to the so-called local magnification effect. A new technique has been developed to mitigate this limitation by characterizing the distribution of the surrounding matrix atoms, rather than those contained within the nano-precipitates themselves. A comprehensive chemical analysis enables further information on size and chemistry to be obtained.

Atomically resolved tomography to directly inform simulations for structure-property relationships.

Microscopy encompasses a wide variety of forms and scales. So too does the array of simulation techniques developed that correlate to and build upon microstructural information. Nevertheless, a true nexus between microscopy and atomistic simulations is lacking.

An automated method of quantifying ferrite microstructures using electron backscatter diffraction (EBSD) data.

The identification and quantification of the different ferrite microconstituents in steels has long been a major challenge for metallurgists. Manual point counting from images obtained by optical and scanning electron microscopy (SEM) is commonly used for this purpose. While classification systems exist, the complexity of steel microstructures means that identifying and quantifying these phases is still a great challenge.

Overcoming challenges in the study of nitrided microalloyed steels using atom probe.

Nitrided steels are widely used in the engineering field due to their superior hardness and other attractive properties. Atom probe tomography (APT) was employed to study two Nb-microalloyed CASTRIP steels with different N contents. A major challenge of using APT to study this group of materials is the presence of tails after Fe peaks in the mass spectra, which overestimates the composition for alloying elements such as Nb and Cu in the steels.

Lattice rectification in atom probe tomography: toward true three-dimensional atomic microscopy.

Atom probe tomography (APT) represents a significant step toward atomic resolution microscopy, analytically imaging individual atoms with highly accurate, though imperfect, chemical identity and three-dimensional (3D) positional information. Here, a technique to retrieve crystallographic information from raw APT data and restore the lattice-specific atomic configuration of the original specimen is presented. This lattice rectification technique has been applied to a pure metal, W, and then to the analysis of a multicomponent Al alloy.