Solvent-Assisted Graphene Exfoliation from Graphite Using Umbrella Sampling Simulations.

We employed molecular dynamics (MD) simulations coupled with umbrella sampling to explore the thermodynamics governing the exfoliation of a single graphene layer from a graphitic substrate in five different solvents such as dimethylacetamide (DMA), -methyl-2-pyrrolidone (NMP), dimethyl sulfoxide (DMSO), cyclohexane (CHX), and water. The substrate was modeled as a stack of three identical graphene layers with the graphene sheet undergoing exfoliation positioned on top of this stack. The initial configurations for each umbrella simulation were generated through steered MD simulations carried out along two distinct coordinates: one parallel and the other perpendicular to the graphene layers.

Nanocarbon-Based Mixed Matrix Pebax-1657 Flat Sheet Membranes for CO/CH Separation.

In the present work, Pebax-1657, a commercial multiblock copolymer (poly(ether-block-amide)), consisting of 40% rigid amide (PA6) groups and 60% flexible ether (PEO) linkages, was selected as the base polymer for preparing dense flat sheet mixed matrix membranes (MMMs) using the solution casting method. Carbon nanofillers, specifically, raw and treated (plasma and oxidized) multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were incorporated into the polymeric matrix in order to improve the gas-separation performance and polymer's structural properties. The developed membranes were characterized by means of SEM and FTIR, and their mechanical properties were also evaluated.

Plasma-Induced Superhydrophobicity as a Green Technology for Enhanced Air Gap Membrane Distillation.

Superhydrophobicity has only recently become a requirement in membrane fabrication and modification. Superhydrophobic membranes have shown improved flux performance and scaling resistance in long-term membrane distillation (MD) operations compared to simply hydrophobic membranes. Here, we introduce plasma micro- and nanotexturing followed by plasma deposition as a novel, dry, and green method for superhydrophobic membrane fabrication.

On the Consistency of the Exfoliation Free Energy of Graphenes by Molecular Simulations.

Monolayer graphene is now produced at significant yields, by liquid phase exfoliation of graphites in solvents. This has increased the interest in molecular simulation studies to give new insights in the field. We use decoupling simulations to compute the exfoliation free energy of graphenes in a liquid environment.

Geochemical modeling of mercury in coastal groundwater.

The systematic analysis of groundwater in the Greek island of Skiathos revealed a seasonal increase of total mercury concentrations after the extensive groundwater abstraction during the busy and heavily touristic summer months. This contamination was accompanied by a corresponding increase of the chloride content of groundwater, attributed to seawater intrusion into the freshwater-depleted aquifer within mercury-rich bedrock. The effects of elevated concentrations of chloride anions in the mobilization of mercury and its speciation were addressed by geochemical equilibrium modeling, considering cinnabar (HgS) as the mineral source of mercury.

CO/CH and He/N Separation Properties and Water Permeability Valuation of Mixed Matrix MWCNTs-Based Cellulose Acetate Flat Sheet Membranes: A Study of the Optimization of the Filler Material Dispersion Method.

The main scope of this work is to develop nano-carbon-based mixed matrix cellulose acetate membranes (MMMs) for the potential use in both gas and liquid separation processes. For this purpose, a variety of mixed matrix membranes, consisting of cellulose acetate (CA) polymer and carbon nanotubes as additive material were prepared, characterized, and tested. Multi-walled carbon nanotubes (MWCNTs) were used as filler material and diacetone alcohol (DAA) as solvent.

New Porous Heterostructures Based on Organo-Modified Graphene Oxide for CO Capture.

In this work, we report on a facile and rapid synthetic procedure to create highly porous heterostructures with tailored properties through the silylation of organically modified graphene oxide. Three silica precursors with various structural characteristics (comprising alkyl or phenyl groups) were employed to create high-yield silica networks as pillars between the organo-modified graphene oxide layers. The removal of organic molecules through the thermal decomposition generates porous heterostructures with very high surface areas (≥ 500 m/g), which are very attractive for potential use in diverse applications such as catalysis, adsorption and as fillers in polymer nanocomposites.

A Study of the Reinforcement Effect of MWCNTs onto Polyimide Flat Sheet Membranes.

Polyimides rank among the most heat-resistant polymers and find application in a variety of fields, including transportation, electronics, and membrane technology. The aim of this work is to study the structural, thermal, mechanical, and gas permeation properties of polyimide based nanocomposite membranes in flat sheet configuration. For this purpose, numerous advanced techniques such as atomic force microscopy (AFM), SEM, TEM, TGA, FT-IR, tensile strength, elongation test, and gas permeability measurements were carried out.

Metabolomics reveals differential mechanisms of toxicity of hyperbranched poly(ethyleneimine)-derived nanoparticles to the soil-borne fungus Verticillium dahliae Kleb.

There is a consensus on the urge for the discovery and assessment of alternative, improved sources of bioactivity that could be developed as plant protection products (PPPs), in order to combat issues that the agrochemical sector is facing. Based on the recent advances in nanotechnology, nanoparticles seem to have a great potential towards the development of the next generation nano-PPPs used as active ingredients (a.i.

Hybrid Sponge-Like Scaffolds Based on Ulvan and Gelatin: Design, Characterization and Evaluation of Their Potential Use in Bone Tissue Engineering.

Ulvan, a bioactive natural sulfated polysaccharide, and gelatin, a collagen-derived biopolymer, have attracted interest for the preparation of biomaterials for different biomedical applications, due to their demonstrated compatibility for cell attachment and proliferation. Both ulvan and gelatin have exhibited osteoinductive potential, either alone or in combination with other materials. In the current work, a series of novel hybrid scaffolds based on crosslinked ulvan and gelatin was designed, prepared and characterized.

Enhancement of Flux Performance in PTFE Membranes for Direct Contact Membrane Distillation.

This work focused on enhancing the flux on hydrophobic polymeric membranes aimed for direct contact membrane distillation desalination (DCMD) process without compromising salt rejection efficiency. Successful coating of commercial porous poly-tetrafluoroethylene membranes with poly(vinyl alcohol) (PVA) was achieved by solution dipping followed by a cross-linking step. The modified membranes were evaluated for their performance in DCMD, in terms of water flux and salt rejection.

Facile synthesis of carbon supported copper nanoparticles from alginate precursor with controlled metal content and catalytic NO reduction properties.

A copper-nanoparticle-doped carbon was prepared from an alginate based precursor in a one step carbonisation-reduction procedure based on the modified polyol process. The ion exchange capacity of the precursor as well as the porosity, metal content, thermal properties, of the final product, were investigated. The preparation route leads to a porous carbon/copper composite with predefined metal loading reaching up to over 30% (w/w) of finely dispersed Cu nanoparticles of fairly uniform size.

Metal-carboxylate interactions in metal-alginate complexes studied with FTIR spectroscopy.

FTIR spectroscopy was used in order to obtain information about metal-carboxylate interactions in metal-alginate complexes of alginic acid and sodium alginate from the brown algae Laminaria digitata after crosslinking with Ca(2+), Cu(2+), Cd(2+), Zn(2+), Ni(2+) and Pb(2+). From the frequencies of the characteristic peaks for asymmetric COO stretching vibration (nu(asym)(COO(-)) and symmetric COO stretching vibration (nu(sym)(COO(-))) a 'pseudo bridged' unidentate coordination with intermolecular hydrogen bonds is proposed for the metal-carboxylate complexes in polyguluronic regions while for the polymannuronic regions the bidentate bridging coordination was proposed. The PIB factor introduced previously as a relationship between metal sorption and frequencies of the asymmetric vibrations was found not to correlate with sorption capacity or any other physical property of the metal-alginate complexes studied.