Impact of thermal annealing and laser treatment on the morphology and optical responses of mono- and bi-metallic plasmonic honeycomb lattice.

Plasmonic nanoparticle arrays with a specific lattice arrangement can support surface lattice resonances (SLRs). SLR exhibits a sharp spectral peak and finds many applications including optical sensing and plasmonic lasers. To optimize SLR for application, a robust method that allows the mass production of plasmonic nanoparticle arrays with refined particle morphology and well-defined lattice arrangement is required.

Tailoring the Weight of Surface and Intralayer Edge States to Control LUMO Energies.

The energies of the frontier molecular orbitals determine the optoelectronic properties in organic films, which are crucial for their application, and strongly depend on the morphology and supramolecular structure. The impact of the latter two properties on the electronic energy levels relies primarily on nearest-neighbor interactions, which are difficult to study due to their nanoscale nature and heterogeneity. Here, an automated method is presented for fabricating thin films with a tailored ratio of surface to bulk sites and a controlled extension of domain edges, both of which are used to control nearest-neighbor interactions.

Bifacial Dye Membranes: Ultrathin and Free-Standing although not Being Covalently Bound.

Layers of aligned dyes are key to photo-driven charge separation in dye sensitized solar cells, but cannot be exploited as rectifying membranes in photocatalysis to separate half-cells because they are not sufficiently stable. While impressive work on the fabrication of stable noncovalent membranes has been recently demonstrated, these membranes are inherently suffering from non-uniform orientation of the constituting dyes. To stabilize layers made from uniformly assembled and aligned dyes, they can be covalently cross-linked via functional groups or via chromophores at the expense of their optical properties.

Porous spherical gold nanoparticles a laser induced process.

Nanoparticles consisting of a mixture of several metals and also porous nanoparticles due to their special structure exhibit properties that find applications in spectroscopic detection or catalysis. Different approaches of top down or bottom up technologies exist for the fabrication of such particles. We present a novel combined approach for the fabrication of spherical porous gold nanoparticles on low-cost glass substrates under ambient conditions using a UV-laser induced particle preparation process with subsequent wet chemical selective etching.

Extremely confined gap plasmon modes: when nonlocality matters.

Historically, the field of plasmonics has been relying on the framework of classical electrodynamics, with the local-response approximation of material response being applied even when dealing with nanoscale metallic structures. However, when the confinement of electromagnetic radiation approaches atomic scales, mesoscopic effects are anticipated to become observable, e.g.

Photocathodes beyond NiO: charge transfer dynamics in a π-conjugated polymer functionalized with Ru photosensitizers.

A conductive polymer (poly(p-phenylenevinylene), PPV) was covalently modified with Ru complexes to develop an all-polymer photocathode as a conceptual alternative to dye-sensitized NiO, which is the current state-of-the-art photocathode in solar fuels research. Photocathodes require efficient light-induced charge-transfer processes and we investigated these processes within our photocathodes using spectroscopic and spectro-electrochemical techniques. Ultrafast hole-injection dynamics in the polymer were investigated by transient absorption spectroscopy and charge transfer at the electrode-electrolyte interface was examined with chopped-light chronoamperometry.

Biomimic Vein-Like Transparent Conducting Electrodes with Low Sheet Resistance and Metal Consumption.

In this contribution, inspired by the excellent resource management and material transport function of leaf veins, the electrical transport function of metallized leaf veins is mimicked from the material transport function of the vein networks. By electroless copper plating on real leaf vein networks with copper thickness of only several hundred nanometre up to several micrometre, certain leaf veins can be converted to transparent conductive electrodes with an ultralow sheet resistance 100 times lower than that of state-of-the-art indium tin oxide thin films, combined with a broadband optical transmission of above 80% in the UV-VIS-IR range. Additionally, the resource efficiency of the vein-like electrode is characterized by the small amount of material needed to build up the networks and the low copper consumption during metallization.

Self-Assembled Graphene/MWCNT Bilayers as Platinum-Free Counter Electrode in Dye-Sensitized Solar Cells.

We describe the preparation and properties of bilayers of graphene- and multi-walled carbon nanotubes (MWCNTs) as an alternative to conventionally used platinum-based counter electrode for dye-sensitized solar cells (DSSC). The counter electrodes were prepared by a simple and easy-to-implement double self-assembly process. The preparation allows for controlling the surface roughness of electrode in a layer-by-layer deposition.

Structure of Ni(OH) intermediates determines the efficiency of NiO-based photocathodes - a case study using novel mesoporous NiO nanostars.

We report the wet chemical synthesis of mesoporous NiO nanostars (NS) as photocathode material for dye-sensitized solar cells (DSSCs). The growth mechanism of NiO NS as a new morphology of NiO is assessed by TEM and spectroscopic investigations. The NiO NS are obtained upon annealing of preformed β-Ni(OH) into pristine NiO with low defect concentrations and favorable electronic configuration for dye sensitization.

Electro-architected porous platinum on metallic multijunction nanolayers to optimize their optical properties for infrared sensor application.

Tailoring the physicochemical properties of the metallic multijunction nanolayers is a prerequisite for the development of microelectronics. From this perspective, a desired lower reflectance of infrared radiation was achieved by an electrochemical deposition of porous platinum in nonaqueous media on silver mirror supported nickel-chrome and nickel-titanium metallic films with incremental decreasing thicknesses from 80-10 nm. The electro-assembled architectures were examined by means of scanning electron microscopy and Fourier transform infrared spectroscopy and it was observed that the layer and sublayer thicknesses and resistivities have a substantial effect upon the porous platinum morphology and its optical properties.

Single particle analysis of herpes simplex virus: comparing the dimensions of one and the same virions via atomic force and scanning electron microscopy.

Currently, two types of direct methods to characterize and identify single virions are available: electron microscopy (EM) and scanning probe techniques, especially atomic force microscopy (AFM). AFM in particular provides morphologic information even of the ultrastructure of viral specimens without the need to cultivate the virus and to invasively alter the sample prior to the measurements. Thus, AFM can play a critical role as a frontline method in diagnostic virology.

Magnetic Biocomposites for Remote Melting.

A new approach toward the fabrication of biocompatible composites suitable for remote melting is presented. It is shown that magnetite nanoparticles (MNP) can be embedded into a matrix of biocompatible thermoplastic dextran esters. For that purpose, fatty acid esters of dextran with adjustable melting points in the range of 30-140 °C were synthesized.

Ru dye functionalized Au-SiO2@TiO2 and Au/Pt-SiO2@TiO2 nanoassemblies for surface-plasmon-induced visible light photocatalysis.

The most commonly used material in photocatalysis is TiO2. Since TiO2 absorbs only UV-light, photosensitizers are used to extend these catalysts' absorption properties into the Vis/NIR spectral range. In this work we merge the commonly used approach of dye sensitization with the only recently developed approach of functionalizing the catalyst with plasmonically active metal nanoparticles in order to achieve synergistic effects between these two types of visible light sensitization.

Toward in vivo chemical imaging of epicuticular waxes.

Epicuticular waxes, which are found on the outer surface of plant cuticles, are difficult to study in vivo. To monitor the growth, development, and structural alterations of epicuticular wax layers, coherent anti-Stokes Raman scattering (CARS) might be used. CARS, as a Raman-based technique, not only provides structural insight but also chemical information by imaging the spatial distribution of Raman-active vibrations.