Effect of Periodontal Instrumentation on Tooth Structure Exposure to Ionizing Radiation: In Vitro Study.

This study aimed to evaluate the effects of different scaling protocols on the morphology and roughness of the root dentin substrate exposure to ionizing radiation. One hundred and thirty extracted bovine incisors were randomly divided into two groups (n=65): non-irradiated (NIR) and irradiated (IR). Each group was initially subdivided into three subgroups according to the type of non-surgical periodontal protocol: NIT: no instrumentation; HS: hand scaling with 15 apical-coronal instrument movements; US: ultrasonic scaling with 15 apical-coronal cycles.

Surrounding and background shades effect on color adjustment of single-shade composites.

This study evaluated the effects of surrounding and background shades on the color adjustment potential (CAP) and visual color match of two single-shade composites, Vittra APS Unique and Charisma Diamond One. Cylinder-shaped specimens were constructed, consisting of either single-shade composites alone (simple) or composites surrounded by the Forma material at shades A1 or A3 (dual). Simple specimens using only the Forma at the specified shades were also prepared.

Reliability of the color measurement of resin composites using images obtained using a stereoscopic loupe.

This study assessed the reliability of a color measurement method using images obtained from a charge-coupled device (CCD) camera and a stereoscopic loupe. Disc-shaped specimens were created using the composite Filtek Z350 XT (shades DA1, DA2, DA3, and DA4) (n = 3). CIELAB color coordinates of the specimens were measured using the spectrophotometer SP60 over white and black backgrounds.

Influence of repositioning guides' color and usage on precision in tooth color measurement with a clinical spectrophotometer.

Background: Repositioning guides are commonly employed in clinical studies to ensure consistent tooth color measurements. Yet, their influence on measured color remains uncertain.

Objective: This study evaluated the impact of repositioning guides' color and usage on tooth color measurement using a clinical spectrophotometer.

Color matching and color recovery in large composite restorations using single-shade or universal composites.

This study assessed the color-matching ability and color recovery of unprepared teeth when using single-shade composites and a universal composite in large restorations. Buccal and palatine surface colors of molars were measured with a spectrophotometer (CIELAB) before preparing round cavities (6 mm in diameter, 2 mm in depth). The cavities were randomly filled with a single-shade composite (Omnichroma, Diamond One, or Vittra APS Unique) or a universal composite (Filtek Universal).

Color discrepancy of single-shade composites at different distances from the interface measured using cell phone images.

Objectives: This study aimed to evaluate the impact of substrate color and interface distance on the color adjustment of 2 single-shade composites, Vittra APS Unique and Charisma Diamond One.

Materials And Methods: Dual disc-shaped specimens were created using Vittra APS Unique or Charisma Diamond One as the center composite, surrounded by shaded composites (A1 or A3). Color measurements were taken with a spectrophotometer against a gray background, recording the color coordinates in the CIELAB color space.

Effect of gingival barrier brands on operator perception, cervical adaptation, and patient comfort during in-office tooth bleaching: a randomized clinical trial.

Background: Light-cured resins are widely used as gingival barriers to protect the gums from highly concentrated peroxides used in tooth bleaching. The impact of barrier brand on clinical outcomes is typically considered negligible. However, there is limited evidence on the effects of different brands on operator experience, barrier adaptation, and patient comfort.

Influence of a gray background and the illuminant on tooth shade selection.

Statement Of Problem: Visual shade selection in dentistry may be influenced by factors that include the background color and the illuminant.

Purpose: The purpose of this clinical study was to evaluate the influence of using a gray background and a light-correcting device on visual shade selection.

Material And Methods: Two experienced clinicians assessed the incisor color of 30 volunteers using the VITA 3D-MASTER shade guide.

Impact XP-endo finisher on the 1-year follow-up success of posterior root canal treatments: a randomized clinical trial.

Objective: To evaluate the clinical relevance of using the XP-endo Finisher as a supplementary tool to improve the success of root canal treatment of posterior teeth with apical periodontitis, as assessed by 1-year follow-up.

Methods: A randomized clinical trial was conducted with 92 posterior teeth with apical periodontitis. Root canal treatment was performed using a single reciprocating file, with or without the supplementary use of the XP-endo Finisher.

Effects of enamel moistening and repositioning guide color on tooth whitening outcomes: A clinical trial.

This clinical trial investigated the effects of pre-application enamel moistening on the impact of a 37% carbamide peroxide whitener on tooth color changes and the influence of repositioning guide colors. Forty participants were randomly assigned to in-office tooth bleaching with either moistened enamel (experimental) or dry enamel (control). The whitener was applied for 45 min over two sessions.

Prevalence of lectures about dental esthetics and female speakers in three Brazilian conferences.

This study analyzed the prevalence of lectures involving esthetics in the scientific program of Brazilian dental conferences and the gender distribution of speakers. All lectures presented in three dental conferences (Bahia, São Paulo, and Goiás states) held from 2016 to 2020 were evaluated. Three investigators individually divided the lectures according to the specialties recognized by the Brazilian Federal Council of Dentistry (FCD) based on their titles.

The role of interface distance and underlying substrate on the color adjustment potential of single-shade composites.

Objective: This study assessed how the distance from the composite interface and the underlying chromatic substrate affect the color adjustment potential (CAP) of two single-shade composites.

Materials And Methods: Cylinder-shaped specimens were created using Vittra APS Unique (VU), Charisma Diamond One (DO), and a shaded (A3) composite. Some single-shade specimens were surrounded by the A3 composite, forming dual specimens.

Background and surrounding colors affect the color blending of a single-shade composite.

This study evaluated the background and effect of surrounding colors on the color blending of a single-shade composite used in a thin layer. Disc-shaped specimens (1.0 mm thickness) were built with the Vittra APS Unique composite surrounded (dual specimens) or not surrounded (simple specimens) by a control composite (shade A1, A2, or A3).

Effectiveness of the pharmacological treatments for sialorrhea in patients with Parkinson's disease: a systematic review and network meta-analysis.

Objectives: The present systematic review and network meta-analysis of randomized control trials (RCTs) aimed to establish whether there are evidence-based differences in the pharmacological agents used to manage sialorrhea in patients with Parkinson's disease (PD).

Material And Methods: The authors searched the databases: MEDLINE via PubMed, EMBASE, Scopus, Web of Science, and Cochrane Library for clinical trials. Unpublished trials were searched on clinicaltrials.

Effect of modeling liquids on resin composite roughness and color parameters after staining and toothbrushing.

This study evaluated surface roughness, color stability, whitening index, and opacity of different types of modeling liquids for resin composite coating after exposure to staining and toothbrushing. Disc-shaped resin composite (Vittra APS, FGM) specimens were fabricated and divided into four groups (n = 10 each): control group, Composite Wetting resin (Ultradent Products), Adper Scotchbond Multipurpose adhesive (3M ESPE), and Adper Universal adhesive (3M ESPE). Surface roughness (Ra) was measured using a rugosimeter, while color stability (∆E00), whitening index (WI), and opacity (%) were measured using a spectrophotometer.

Effects of surrounding and underlying shades on the color adjustment potential of a single-shade composite used in a thin layer.

Objectives: This study aimed to evaluate the surrounding and underlying shades' effect on the color adjustment potential (CAP) of a single-shade composite used in a thin layer.

Materials And Methods: Cylinder specimens (1.0 mm thick) were built with the Vittra APS Unique composite, surrounded (dual specimens) or not (simple specimens) by a control composite (shade A1, A2, or A3).

Supplementary use of the XP-endo Finisher on postoperative pain in posterior teeth with periapical lesions: a randomized clinical trial.

Objective: This study evaluated the effect of the supplementary use of the XP-endo Finisher on postoperative endodontic pain.

Methods: This study was a randomized clinical trial with a parallel design. Ninety-two posterior teeth with necrotic pulps and apical periodontitis were instrumented with a single file (Reciproc) in a reciprocating movement followed or not (control) by additional instrumentation with XP-endo Finisher.

Effect of surrounded shade and specimen`s thickness on color adjustment potential of a single-shade composite.

This study evaluated the effect of surrounded shade and specimens` thickness on the color adjustment potential (CAP) of a single-shade composite. The composite Vittra APS Unique was surrounded (dual specimens) or not (simple specimens) by a control composite (shade A1, A2, or A3). Simple specimens of the control composite were also confectioned.

Bleaching effect of violet LED of 405-410 nm on stained endodontically treated teeth.

Aim: To evaluate in vitro the whiteness index (WID) and the whiteness index variation (ΔWID), as well as the color stability of stained endodontically treated teeth after bleaching with violet LED (VL) and with hydrogen peroxide 35% (HP) associated or not to VL.

Methods: Twenty-four lower incisors were selected. The color was measured using a spectrophotometer at the following times: baseline, after staining, bleaching, and thermocycling, to determine the whiteness index and variation (WID and ΔWID).

Is the quality of root canal filling obtained by cone-beam computed tomography associated with periapical lesions? A systematic review and meta-analysis.

Aim: To evaluate the influence of root canal filling quality on periapical lesion status using cone-beam computed tomography (CBCT).

Materials And Methods: The bibliographic search was conducted in electronic databases of PubMed, Embase, Scopus, and Web of Science without restrictions related to the year of publication and language. Inclusion criteria were prospective or retrospective cohort studies that followed periapical pathosis for, at least, 1 year.

Can ozone or violet light improve the color change or physicochemical properties of hydrogen peroxide-bleached tooth?

This study investigated the bleaching effectiveness and the physicochemical effects on enamel of violet light and ozone, associate or not to hydrogen peroxide, compared to 35%-hydrogen peroxide. Enamel-dentin blocks from human molars were randomly allocated to receive one of the following bleaching protocols (n=15): (HP) 35%-hydrogen peroxide, (VL) violet light, (OZ) ozone, the association between hydrogen peroxide with ozone (OZ+HP) or violet light (VL+HP). All protocols were performed in two sessions with a 48h interval.

The effectiveness of the supplementary use of the XP-endo Finisher on bacteria content reduction: a systematic review and meta-analysis.

Objectives: This systematic review evaluated the efficacy of the supplementary use of the XP-endo Finisher on bacteria content reduction in the root canal system.

Materials And Methods: studies evaluating the use of the XP-endo Finisher on bacteria content were searched in four databases in July 2020. Two authors independently screened the studies for eligibility.

Effect of Interval Time between Corrosive and Abrasive Challenges on a Nanoparticulate Composite Resin.

Objective: This study aimed to evaluate the effect of interval time after acidic beverage intake and brushing on roughness and hardness of resin composite.

Materials And Methods: Nanofilled resin composites were tested as per interval time (no interval, 15 or 30 minutes) between aging media (isotonic, sports drink) and brushing. Specimens ( = 9) were subjected to three cycles daily for 5 days with immersion in beverage followed by simulated brushing (585 strokes).

Color assessment of resin composite by using cellphone images compared with a spectrophotometer.

Objectives: This study assessed the reliability of digital color measurements using images of resin composite specimens captured with a cellphone.

Materials And Methods: The reference color of cylindrical specimens built-up with the use of resin composite (shades A1, A2, A3, and A4) was measured with a portable spectrophotometer (CIELab). Images of the specimens were obtained individually or pairwise (compared shades in the same photograph) under standardized parameters.