From dumping to circular economy: There is no success like failure.

Waste management has been developing in response to needs. The need to get rid of unwanted materials has always been a motivation but using the resource value of waste has also been a driver from the stone age and forwards. In affluent times not so much.

Co-digestion of sewage sludge and wood fly ash.

This study uses a new approach for the recycling of plant nutrients by co-digesting sewage sludge with fly ash from a wood combustion. Sewage sludge and fly ash both are enriched with nutrients of the wastewater resp. wood, which makes these products an enhanced source for recycled fertilizers.

Controlling the mobility of chromium and molybdenum in MSWI fly ash in a washing process.

Fly ash from a cogeneration plant near Sundsvall in Sweden was treated in an ash-washing facility. The leaching of chromium (Cr) and molybdenum (Mo) from the ash residue exceeded the limit values for non-hazardous landfills. In this study factors that influence the leaching of Cr and Mo were identified and methods that can reduce the leaching were evaluated.

Impact of physical pre-treatment of source-sorted organic fraction of municipal solid waste on greenhouse-gas emissions and the economy in a Swedish anaerobic digestion system.

Several methods for physical pre-treatments of source sorted organic fraction of municipal solid waste (SSOFMSW) before for anaerobic digestion (AD) are available, with the common feature that they generate a homogeneous slurry for AD and a dry refuse fraction for incineration. The selection of efficient methods relies on improved understanding of how the pre-treatment impacts on the separation and on the slurry's AD. The aim of this study was to evaluate the impact of the performance of physical pre-treatment of SSOFMSW on greenhouse-gas (GHG) emissions and on the economy of an AD system including a biogas plant with supplementary systems for heat and power production in Sweden.

Quick-start of full-scale anaerobic digestion (AD) using aeration.

A conventional 1300 m(3) continuously stirred anaerobic tank reactor at the city of Boden, north Sweden, which was receiving a feed of both sewage sludge and food waste, was put out of operation due to the build-up of a float phase. The reactor was emptied and cleaned. At start-up there was no methanogenic sludge available, so an unconventional start-up procedure was applied: The reactor was rapidly (8 days with 1200 kg of total solids (TS) added daily) filled with thickened, and slightly acidic sewage sludge, showing only slight methane generation, which was subsequently heated to 55 °C.

Sources and remediation techniques for mercury contaminated soil.

Mercury (Hg) in soils has increased by a factor of 3 to 10 in recent times mainly due to combustion of fossil fuels combined with long-range atmospheric transport processes. Other sources as chlor-alkali plants, gold mining and cement production can also be significant, at least locally. This paper summarizes the natural and anthropogenic sources that have contributed to the increase of Hg concentration in soil and reviews major remediation techniques and their applications to control soil Hg contamination.

Development of drainage water quality from a landfill cover built with secondary construction materials.

The aim of this study was to evaluate the drainage water quality from a landfill cover built with secondary construction materials (SCM), fly ash (FA), bottom ash (BA) sewage sludge, compost and its changes over time. Column tests, physical simulation models and a full scale field test were conducted. While the laboratory tests showed a clear trend for all studied constituents towards reduced concentrations over time, the concentrations in the field fluctuated considerably.

Evaluating the effects of electroporation pre-treatment on the biogas yield from ley crop silage.

Exploiting the full biogas potential of some types of biomass is challenging. The complex structures of lignocellulosic biomass are difficult to break down and thus require longer retention times for the nutrients to become biologically available. It is possible to increase the digestibility of the substrate by pre-treating the material before digestion.

Influence of particle size distribution, organic carbon, pH and chlorides on washing of mercury contaminated soil.

Feasibility of soil washing to remediate Hg contaminated soil was studied. Dry sieving was performed to evaluate Hg distribution in soil particle size fractions. The influence of dissolved organic matter and chlorides on Hg dissolution was assessed by batch leaching tests.

Utilisation of chemically stabilized arsenic-contaminated soil in a landfill cover.

The aim of the study was to determine if an As-contaminated soil, stabilized using zerovalent iron (Fe(0)) and its combination with gypsum waste, coal fly ash, peat, or sewage sludge, could be used as a construction material at the top layer of the landfill cover. A reproduction of 2 m thick protection/vegetation layer of a landfill cover using a column setup was used to determine the ability of the amendments to reduce As solubility and stimulate soil functionality along the soil profile. Soil amendment with Fe(0) was highly efficient in reducing As in soil porewater reaching 99 % reduction, but only at the soil surface.

The effects of substrate pre-treatment on anaerobic digestion systems: a review.

Focus is placed on substrate pre-treatment in anaerobic digestion (AD) as a means of increasing biogas yields using today's diversified substrate sources. Current pre-treatment methods to improve AD are being examined with regard to their effects on different substrate types, highlighting approaches and associated challenges in evaluating substrate pre-treatment in AD systems and its influence on the overall system of evaluation. WWTP residues represent the substrate type that is most frequently assessed in pre-treatment studies, followed by energy crops/harvesting residues, organic fraction of municipal solid waste, organic waste from food industry and manure.

Mobility and fractionation of arsenic, chromium and copper in thermally treated soil.

Thermal treatment is used to remediate soil co-contaminated with organic and inorganic contaminants. It destroys organic contaminants, but the remaining inorganic contaminants require further treatment. In this study the effects of thermal treatment on the mobility, speciation and chemical fractionation of As, Cr and Cu in a CCA-polluted soil were evaluated by leaching tests, As speciation assays and a sequential extraction procedure.

Carbon speciation in ash, residual waste and contaminated soil by thermal and chemical analyses.

Carbon in waste can occur as inorganic (IC), organic (OC) and elemental carbon (EC) each having distinct chemical properties and possible environmental effects. In this study, carbon speciation was performed using thermogravimetric analysis (TGA), chemical degradation tests and the standard total organic carbon (TOC) measurement procedures in three types of waste materials (bottom ash, residual waste and contaminated soil). Over 50% of the total carbon (TC) in all studied materials (72% in ash and residual waste, and 59% in soil) was biologically non-reactive or EC as determined by thermogravimetric analyses.

MSWI bottom ash used as basement at two pilot-scale roads: comparison of leachate chemistry and reactive transport modeling.

The recycling of municipal solid waste incineration bottom ash as aggregates for road basement requires assessing the long-term evolution of leachate chemistry. The Dåva (Sweden) and Hérouville (France) pilot-scale roads were monitored during 6 and 10 years, respectively. Calculated saturation indices were combined to batch test modeling to set a simplified geochemical model of the bottom ash materials.

Pay as you throw: strengths and weaknesses of weight-based billing in household waste collection systems in Sweden.

Householders' response to weight-based billing for the collection of household waste was investigated with the aim of providing decision support for waste management policies. Three questions were addressed: How much and what kind of information on weight-based billing is discernible in generic Swedish waste collection statistics? Why do local authorities implement weight-based billing, and how do they perceive the results? and, Which strengths and weaknesses of weight-based billing have been observed on the local level? The study showed that municipalities with pay-by-weight schemes collected 20% less household waste per capita than other municipalities. Surprisingly, no part of this difference could be explained by higher recycling rates.

Evaluation of recycling programmes in household waste collection systems.

A case study and a literature review have been carried out to address the two questions: how can waste flow data from collection systems be interpreted and compared? and which factors are decisive in the results of recycling programmes in household waste collection systems? The aim is to contribute to the understanding of how recycling programmes affect the quantity of waste and sorting activities. It is shown how the results from various waste sorting systems can be interpreted and made comparable. A set of waste flow indicators is proposed, which together with generic system descriptions can facilitate comparisons of different collections systems.

Hydraulic conductivity of fly ash-sewage sludge mixes for use in landfill cover liners.

Secondary materials could help meeting the increasing demand of landfill cover liner materials. In this study, the effect of compaction energy, water content, ash ratio, freezing, drying and biological activity on the hydraulic conductivity of two fly ash-sewage sludge mixes was investigated using a 2(7-1) fractional factorial design. The aim was to identify the factors that influence hydraulic conductivity, to quantify their effects and to assess how a sufficiently low hydraulic conductivity can be achieved.

Inconsistent pathways of household waste.

The aim of this study was to provide policy-makers and waste management planners with information about how recycling programs affect the quantities of specific materials recycled and disposed of. Two questions were addressed: which factors influence household waste generation and pathways? and how reliable are official waste data? Household waste flows were studied in 35 Swedish municipalities, and a wide variation in the amount of waste per capita was observed. When evaluating the effect of different waste collection policies, it was found to be important to identify site-specific factors influencing waste generation.

Methods for household waste composition studies.

The question is how to conduct household waste composition studies. The review is divided into three parts: overview of known methods, sampling theory, and the waste components. Twenty methods are listed and commented on.

Stabilization of As, Cr, Cu, Pb and Zn in soil using amendments--a review.

The spread of contaminants in soil can be hindered by the soil stabilization technique. Contaminant immobilizing amendments decrease trace element leaching and their bioavailability by inducing various sorption processes: adsorption to mineral surfaces, formation of stable complexes with organic ligands, surface precipitation and ion exchange. Precipitation as salts and co-precipitation can also contribute to reducing contaminant mobility.

Toxicity of leachate from bottom ash in a road construction.

A test road constructed with municipal solid waste incineration (MSWI) bottom ash was monitored over a period of 36 months. Using chemical and toxicological characterisation, the environmental impact of leachates from bottom ash was evaluated and compared with leachates from gravel used as reference. Initial leaching of Cl, Cu, K, Na, NH4-N and TOC from bottom ash was of major concern.

Evaluation of the critical factors controlling stability of chromium, copper, arsenic and zinc in iron-treated soil.

Various environmental factors are expected to affect the mobility of elements in chemically stabilized soils. The aim of this study was to evaluate the effects of pH, oxidizing-reducing potential (Eh), liquid-to-solid ratio (L/S), presence of organic matter (OM) and microbial activity (MA) on the mobility of chromium, copper, arsenic and zinc in zerovalent iron (Fe(0))-stabilized soil. A 2(5) full factorial design was applied to assess the leaching of the elements from the treated soil.

Comparison of analytical error and sampling error for contaminated soil.

Investigation of soil from contaminated sites requires several sample handling steps that, most likely, will induce uncertainties in the sample. The theory of sampling describes seven sampling errors that can be calculated, estimated or discussed in order to get an idea of the size of the sampling uncertainties. With the aim of comparing the size of the analytical error to the total sampling error, these seven errors were applied, estimated and discussed, to a case study of a contaminated site.