Publications by authors named "Anand Murthi"

Background: The aim of this study was to evaluate health literacy in orthopedic shoulder and elbow patients.

Methods: This retrospective cross-sectional study included all new English-speaking adult patients presenting to two fellowship-trained shoulder and elbow surgeons from October 2020-July 2021. Patients who did not complete the Brief Health Literacy Screen Tool (BRIEF) were excluded, leaving 594 patients.

View Article and Find Full Text PDF

Background: The treatment of patients who suffer a proximal humeral fracture (PHF) remains controversial. The purpose of this study was to find consensus among experts using a validated iterative process in the treatment of patients after a PHF.

Methods: The Neer Circle is an organization of shoulder experts recognized for their service to the American Shoulder and Elbow Surgeons.

View Article and Find Full Text PDF

Background: The realities of midshaft clavicle fracture distribution have not been described accurately. Consequently, a topographical depiction of midshaft clavicle fractures may help design implants that are more anatomically concordant with the fractured clavicle, leading to better outcomes and fewer complications.

Methods: This is a retrospective cohort study.

View Article and Find Full Text PDF

Background: Advancements in surgical planning, technique, and prosthesis design have improved adaptation to patient anatomy in reverse total shoulder arthroplasty (rTSA). Postoperative changes in deltoid and rotator cuff muscle length are important and may vary based on preoperative indications and prosthesis selection. The purpose of this study is to demonstrate the changes in deltoid and rotator cuff muscle length for planned rTSA using the spectrum of prosthesis configurations in both glenohumeral arthritis (GHOA) and rotator cuff tear arthropathy (RCA).

View Article and Find Full Text PDF
Article Synopsis
  • * A total of 2.1% of patients (n=138) experienced dislocations, primarily within the first 90 days post-surgery, with different treatment approaches for dislocation including closed reduction, open reduction, revision arthroplasty, or benign neglect.
  • * Among those treated with closed reduction, only 31% were successfully resolved without further intervention, while many either required revision surgery or experienced recurrent dislocations, highlighting the complexity of managing these postoperative complications.
View Article and Find Full Text PDF

Since the advent of Neer's total shoulder arthroplasty in 1974, glenoid implant design has evolved to optimize patient function and increase implant longevity. Glenoid loosening continues to be a major cause of total shoulder arthroplasty failure due to both patient and implant factors. The more recent development of posterior augmented glenoids, peg fixation with ingrowth potential, inlay implants, zoned conformity implants, and convertible glenoids have all shown promising results in improving glenoid fixation and survival in different clinical circumstances.

View Article and Find Full Text PDF

Background: Augmented baseplates can be effective at addressing eccentric glenoid wear in reverse total shoulder arthroplasty. However, these implants often come in a limited number of predetermined shapes that require additional reaming to ensure adequate glenoid seating. This typically involves complex instrumentation and can have a negative impact on implant stability.

View Article and Find Full Text PDF
Article Synopsis
  • The Walch classification is used to assess glenohumeral arthritis but has shown low and inconsistent reliability across studies.
  • A systematic review of literature analyzed the reliability of this classification based on different imaging methods and modifications, including intraobserver and interobserver evaluations.
  • Thirteen articles were reviewed, revealing that reliability scores varied significantly, with no clear patterns linked to imaging modality or the experience level of the raters.
View Article and Find Full Text PDF

Background: Prior research has shown that industry funding can impact the outcomes reported in medical literature. Limited data exist on the degree of bias that industry funding may have on shoulder arthroplasty literature outside of the Journal of Shoulder and Elbow Surgery. The purpose of this study is to characterize the type and frequency of funding for recently published shoulder arthroplasty studies and the impact of industry funding on reported outcomes.

View Article and Find Full Text PDF

Background: The split anconeus fascia transfer (SAFT) is an option for reconstruction of the lateral ulnar collateral ligament (LUCL) in chronic posterolateral rotatory instability (PLRI) of the elbow with potential advantages of using only local tissue within the surgical exposure and not requiring ulnar fixation. This study aimed to assess SAFT strength compared to a traditional free graft reconstruction in a PLRI biomechanical model.

Methods: To measure biomechanical strength, eight cadaveric upper extremity pairs were utilized.

View Article and Find Full Text PDF
Article Synopsis
  • The study examined gender representation among shoulder arthroplasty surgeons, identifying that the number of female surgeons increased slightly from 1.6% in 2012 to 2.9% in 2019.
  • Female surgeons tend to graduate from medical school more recently than their male counterparts, with an average graduation year of 2005 for women versus 1997 for men.
  • The practice patterns revealed that only about 10% of both female and male surgeons worked at hospitals with orthopedic residency programs, indicating similar participation levels in these academic settings.
View Article and Find Full Text PDF
Article Synopsis
  • Particle-induced osteolysis from polyethylene wear is a major issue causing implant failure in shoulder surgeries, prompting the development of vitamin E-enhanced highly cross-linked polyethylene (VEXPE) to improve wear resistance compared to traditional materials.!* -
  • The study assessed the wear properties of VEXPE against conventional ultrahigh-molecular-weight polyethylene (UHMWPE) under various testing conditions, recording mass loss and determining wear rates, demonstrating superior performance of VEXPE.!* -
  • Results showed that VEXPE glenoid had significantly lower wear rates than both highly cross-linked polyethylene and UHMWPE glenoids, suggesting it may reduce the risk of osteolysis and improve the longevity of shoulder implants.!*
View Article and Find Full Text PDF
Article Synopsis
  • Home health services are designed to provide extra care after hospital discharge, potentially reducing complications and healthcare costs, particularly for patients recovering from total shoulder arthroplasty (TSA and RSA).
  • In a study analyzing data from 2010 to 2019, patients receiving home health services were compared to similar patients who did not, focusing on outcomes like complication rates, emergency department visits, readmissions, and overall costs.
  • Results indicated that the home health group had higher readmission rates, more emergency department visits, and greater overall care costs than the non-home health group, suggesting these services did not achieve the intended benefits.
View Article and Find Full Text PDF

Background: Subscapularis function is critical after anatomic total shoulder arthroplasty (aTSA). Recently, however, a technique has been described that features a chevron or V-shaped subscapularis tendon cut (VT). This biomechanical study compared repair of the standard tenotomy (ST), made perpendicular to the subscapularis fibers, to repair of the novel VT using cyclic displacement, creep, construct stiffness, and load to failure.

View Article and Find Full Text PDF

Introduction: Patients on chronic corticosteroids/immunosuppressants (SI) undergoing orthopaedic surgery are at an increased risk for surgical complications and worse outcomes. However, whether or not chronic preoperative SI use increases the risk for 30-day complications in patients undergoing primary total shoulder arthroplasty (SA) has yet to be explored.

Methods: From 2006 to 2019, the National Surgical Quality Improvement Program (NSQIP) database was used to identify all patients who underwent primary SA (anatomic TSA and reverse TSA).

View Article and Find Full Text PDF

Background: Clinical decision-making often relies on evidence-based medicine, derived from objective data with conventional and rigorous statistical tests to evaluate significance. The literature surrounding rehabilitation after rotator cuff repair (RCR) is conflicting, with no defined standard of practice.

Purpose: To determine the fragility index (FI) and the fragility quotient (FQ) of randomized controlled trials (RCTs) evaluating rehabilitation protocols after RCR.

View Article and Find Full Text PDF

Background: Lower trapezius tendon transfer is 1 option to improve pain and function with massive irreparable rotator cuff tears. Magnetic resonance imaging (MRI) evaluation of tendon healing with the procedure has not yet been reported. The purpose of this study was to evaluate early tendon transfer healing using postoperative MRI scans and to assess early clinical outcomes in patients after arthroscopically assisted lower trapezius tendon transfer (AALTT) for massive irreparable rotator cuff tears.

View Article and Find Full Text PDF
Article Synopsis
  • Instability or dislocation after reverse shoulder arthroplasty (RSA) is a common problem that doctors face when treating patients.
  • A big study involving over 6,600 patients from 15 different hospitals looked at how often dislocations happen and what factors might cause them.
  • The results showed that the overall dislocation rate was 2.1%, but higher for patients getting revision surgeries, and some patients were more likely to dislocate than others based on their specific shoulder issues.
View Article and Find Full Text PDF
Article Synopsis
  • The study investigates the risk factors for acromial and scapular spine fractures following reverse shoulder arthroplasty in patients with different diagnoses such as glenohumeral arthritis, rotator cuff arthropathy, and massive irreparable rotator cuff tears.
  • Data from 4,764 patients who underwent the procedure between January 2013 and June 2019 were analyzed, revealing an overall stress fracture incidence of 4.1%, with higher rates in patients with rotator cuff issues compared to those with arthritis.
  • Specifically, the presence of inflammatory arthritis was a significant predictor of fractures in glenohumeral arthritis patients, while factors such as sex and osteoporosis were also relevant in the rotator cuff arthropathy
View Article and Find Full Text PDF

Anatomy And Function: The long head of the biceps tendon (LHBT) has different properties and characteristics that render it a valuable tool in the hands of shoulder surgeons. Its accessibility, biomechanical strength, regenerative capabilities, and biocompatibility allow it to be a valuable autologous graft for repairing and augmenting ligamentous and muscular structures in the glenohumeral joint.

Shoulder Surgery Applications: Numerous applications of the LHBT have been described in the shoulder surgery literature, including augmentation of posterior-superior rotator cuff repair, augmentation of subscapularis peel repair, dynamic anterior stabilization, anterior capsule reconstruction, post-stroke stabilization, and superior capsular reconstruction.

View Article and Find Full Text PDF

Postoperative rehabilitation following rotator cuff repair is essential for a positive patient outcome. Each patient should have a program tailored to their individual tear and repair characteristics. Their plan should be advanced according to their progress, with therapist and surgeon communication.

View Article and Find Full Text PDF

Background: Total shoulder arthroplasty (TSA) is increasingly performed safely and efficiently as an outpatient procedure in certain patients. Patient selection is often based on surgeon choice, surgeon expertise, or institutional guidelines. One orthopedic research group released a publicly available shoulder arthroplasty outpatient appropriateness risk calculator that considers patient demographic characteristics and comorbidities with the aim of helping surgeons to predict successful outpatient TSA.

View Article and Find Full Text PDF

Introduction: Acromion and scapular spine stress fractures can be catastrophic complications following reverse shoulder arthroplasty (RSA). A variety of host, implant, and technical factors have been identified that increase the risk of this complication. The glenoid component in particular has been closely evaluated for its impact on rates of stress fractures following RSA.

View Article and Find Full Text PDF

Disparities in the access to, utilization of, and outcomes after orthopaedic surgery are a notable problem in the field that limits patients' ability to access the highest level of care and achieve optimal outcomes. Disparities exist based on numerous sociodemographic factors, with sex and race/ethnicity being two of the most well-studied factors linked to disparities in orthopaedic care. These disparities cross all subspecialties and tend to negatively affect women and racial/ethnic minorities.

View Article and Find Full Text PDF

Background: Small changes in deltoid tension and moment arm due to glenosphere lateralization may be associated with an increase in acromion or scapular spine strain in reverse shoulder arthroplasty (RSA), which can lead to stress fracture. The coracoacromial ligament (CAL) may be protective and lower the strain seen on the acromion or scapular spine. This biomechanical study investigated the impact of glenosphere lateralization and CAL integrity on acromion and scapular spine strain after RSA.

View Article and Find Full Text PDF