Investigations on the Degradation Behavior of Processed FeMnSi-xCu Shape Memory Alloys.

A new functional Fe-30Mn-5Si-xCu (x = 1.5 and 2 wt%) biomaterial was obtained from the levitation induction melting process and evaluated as a biodegradable material. The degradation characteristics were assessed in vitro using immersion tests in simulated body fluid (SBF) at 37 ± 1 °C, evaluating mass loss, pH variation that occurred in the solution, open circuit potential (OCP), linear and cyclic potentiometry (LP and CP), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and nano-FTIR.

Influence of Dynamic Strain Sweep on the Degradation Behavior of FeMnSi-Ag Shape Memory Alloys.

Iron-based SMAs can be used in the medical field for both their shape memory effect (SME) and biodegradability after a specific period, solving complicated chirurgical problems that are partially now addressed with shape-memory polymers or biodegradable polymers. Iron-based materials with (28-32 wt %) Mn and (4-6 wt %) Si with the addition of 1 and 2 wt % Ag were obtained using levitation induction melting equipment. Addition of silver to the FeMnSi alloy was proposed in order to enhance its antiseptic property.

Analysis of Degradation Products of Biodegradable ZnMgY Alloy.

Biodegradable metallic materials are increasingly gaining ground in medical applications. Zn-based alloys show a degradation rate between those recorded for Mg-based materials with the fastest degradation rate and Fe-based materials with the slowest degradation rate. From the perspective of medical complications, it is essential to understand the size and nature of the degradation products developed from biodegradable materials, as well as the stage at which these residues are eliminated from the body.

In-Vitro Analysis of FeMn-Si Smart Biodegradable Alloy.

Special materials are required in many applications to fulfill specific medical or industrial necessities. Biodegradable metallic materials present many attractive properties, especially mechanical ones correlated with good biocompatibility with vivant bodies. A biodegradable iron-based material was realized through electric arc-melting and induction furnace homogenization.

Pain Assessment and Management in Pediatric Intensive Care Units Around the World, an International, Multicenter Study.

The adequate assessment and management of pain remains a challenging task in the Pediatric Intensive Care Unit (PICU). Our goal is to describe how pain is assessed and managed in PICUs around the world and to examine how human and material resources impact achievement of this goal. An international multicenter cross-sectional observational study was designed with the participation of 34 PICUs located in urban, suburban, and rural areas of 18 countries.

New Zn3Mg-xY Alloys: Characteristics, Microstructural Evolution and Corrosion Behavior.

Zinc biodegradable alloys attracted an increased interest in the last few years in the medical field among Mg and Fe-based materials. Knowing that the Mg element has a strengthening influence on Zn alloys, we analyze the effect of the third element, namely, Y with expected results in mechanical properties improvement. Ternary ZnMgY samples were obtained through induction melting in Argon atmosphere from high purity (Zn, Mg, and Y) materials and MgY (70/30 wt%) master alloys with different percentages of Y and keeping the same percentage of Mg (3 wt%).