Three-dimensional analysis of posterior tooth inclinations in transverse and sagittal relationships: A cross-sectional study.

Objective: To compare tooth inclinations in different sagittal skeletal patterns and transverse maxillary relationships three-dimensionally.

Methods: A cross-sectional study carried out with 132 three-dimensional digital models in the complete permanent dentition divided into six groups (n=22); three groups with maxillary atresia: G1- skeletal class I, G2- skeletal class II and G3-skeletal class III; three groups without maxillary atresia: G4- skeletal class I; G5- skeletal class II and G6- skeletal class III. The comparison between the skeletal pattern was performed by the non-parametric tests of Kruskal Wallis and Dunn and between the groups by the non-parametric test of Mann Whitney.

Does the initial surface roughness of different CuNiTi wires affect the frictional resistance?

This study aimed to assess and correlate initial surface roughness and frictional resistance of rectangular CuNiTi wires inserted in different self-ligating brackets. The sample consisted of 40 bracket-wire sets (rectangular CuNiTi wires of 0.017" x 0.

Effect of horizontal slot of maxillary canines' brackets with varying wire angulations - An in vitro study.

A new device was developed to enable the visualization and measurement of canine angulation while at the same time visualizing and measuring the force transmitted to adjacent teeth. This study aimed to evaluate the mesiodistal tilt angle of the upper canine brackets, the wire deflection, and its effects on adjacent teeth with five different slot designs of upper canines. Wires (0.

Comparison of the shear bond strength between metal brackets and Transbond™ XT, Filtek™ Z250 and Filtek™ Z350 before and after gastroesophageal reflux: An in vitro study.

Purpose: To evaluate in vitro the effect of gastroesophageal reflux, before and after bonding of metal brackets on composite resin surface.

Materials And Methods: Two hundred and ten resin discs were divided into 5 groups (n=42), according to the time and medium of storage: 24h, 7- and -30 days in artificial saliva (AS) and hydrochloric acid (HCL). Twelve samples from each group were submitted to surface roughness analysis (n=60).

The influence of elastomeric ligatures pigmentation on smile aesthetics during orthodontic treatment.

Aim: To assess the influence of elastomeric ligatures, subjected to a previous in vitro pigmentation process using different substances, on smile aesthetics during orthodontic treatment, from the perception of students and professionals.

Methods: Eight elastomeric ligatures of five commercial brands (3M/Unitek, American Orthodontics, Morelli, Ortho Technology, and Orthometric) (n=8) were immersed in coffee, Coca-Cola, and red wine for one minute per day, for 28 days; and another group of ligatures was immersed in artificial saliva. All samples were photographed and subsequently analyzed using the Adobe Photoshop software, by the RGB method.

Flexural strength and surface microhardness of materials used for temporary dental disocclusion submitted to thermal cycling: An in vitro study.

Objective: The objective of this study was to evaluate the effect of temperature variation on surface microhardness and resistance to flexion of different materials used for making a temporary dental disocclusion.

Methods: One hundred specimens were made of the following materials (n=20): glass ionomer cement (GIC); compomer (CP); composite resin (CR); Blue colour resin composite for temporary dental disocclusion (BTDD); ultraviolet colour resin composite for temporary dental disocclusion (UVTDD). They were stored in distilled water for 24hours and, subsequently, half of the specimens in each group were subjected to thermal cycling (n=10).

Light Activation and Thermocycling Methods on the Shear Bond Strength of Brackets Bonded to Porcelain Surfaces.

The present study was evaluated the effect of different light activation and thermocycling methods on the shear bond strength (SBS) and on the adhesive remnant index (ARI) of metal brackets bonded to feldspathic ceramic. Hundred metal brackets were bonded to 20 porcelain cylinders, divided into four groups (n=25) based on light activation and thermocycling processes. The cylinders were etched with 10% hydrofluoric acid for 60 s and coated with two layers of silane.

Comparison of force delivery of thermally activated aesthetic and non-aesthetic Ni-Ti wires: An in-vitro study.

Objective: The present study aimed to compare the force of aesthetic wires and their non-aesthetic equivalents from two commercial brands at different displacement points, during the unloading phase at 36°C.

Materials And Methods: Forty samples (n=10) were assessed, which were presented in two groups of aesthetic wires and two groups of non-aesthetic wires from the brands GAC® (Dentsply GAC® International, NY, USA) and Aditek®(Cravinhos, SP, Brazil), with 0.016-inch gauge.

Surface roughness of composite resins subjected to hydrochloric acid.

The purpose of this study was to determine the influence of hydrochloric acid on surface roughness of composite resins subjected to brushing. Sixty samples measuring 2 mm thick x 6 mm diameter were prepared and used as experimental units. The study presented a 3x2 factorial design, in which the factors were composite resin (n=20), at 3 levels: microhybrid composite (Z100), nanofilled composite (FiltekTM Supreme), nanohybrid composite (Ice), and acid challenge (n=10) at 2 levels: absence and presence.

The influence of mouthrinses and simulated toothbrushing on the surface roughness of a nanofilled composite resin.

The aim of this study was to determine the influence of mouthrinses on the surface roughness of a nanofilled composite resin after toothbrushing. One hundred nanofilled composite resin specimens were prepared and randomly distributed into two groups-brushed and non-brushed-and then assigned to five subgroups, according to the mouthrinse solutions (n = 10): Colgate Plax Fresh Mint, Oral B, Cepacol, Colgate Plax, and artificial saliva. Each sample was immersed in 20 mL of the mouthrinses for 1 minute, 5 days per week, twice a day, for a 3-week period.