A 140-year record of environmental changes in São Sebastião, Brazil.

Over the past two centuries, coastal and estuarine areas have experienced environmental stress due to rapid population growth, leading to higher demand, overexploitation, habitat transformation, and pollution, which have severe consequences on the overall ecosystem and human health. This work aims to understand historical perspectives of such environmental stress in a coastal area of São Sebastião city in the São Paulo State of Brazil, which has witnessed rapid changes in land use over the past 60-70 years. We collected eleven surface sediments and one 64 cm long core from the shallow water depth sector of the São Sebastião Channel (SSC), adjacent to the Araçá Bay region.

Decreasing the dose of equine chorionic gonadotropin does not affect ovarian or pregnancy responses of purebred taurine and crossbred beef heifers.

In this study there was evaluation of effects of different doses of equine chorionic gonadotropin (eCG: 200, 300, or 400 IU) administrated at progesterone (P4) plus estradiol-based timed AI (TAI). A total of 1080 heifers were included in the study. There was insertion of the intravaginal P4-device plus administration of 2 mg of estradiol benzoate IM.

Emergence profile customization technique during implant transfer.

This case report aimed to describe the clinical considerations in oral rehabilitation with prostheses on implants in the anterior region, using emergence profile customization technique during implant transfer. A patient presented with a missing left upper central incisor and with not satisfactory esthetic in the other upper incisors. After diagnosis, a treatment plan was elaborated: implant placement in this region; ceramic laminates for teeth 11 and 22, and full crown for tooth 12.

Influence of resin cement thickness and temperature variation on mechanical behavior of dental ceramic fragment restoration.

To evaluate the stress behavior of ceramic fragment restoration, varying the thickness of the cement layer and intraoral temperature variation. A solid model of a upper lateral incisor was obtained and a defect at enamel distal/incisal edge was restored with a ceramic fragment. Based on this initial model, 4 different models (M) were built: M1 - absence of cement layer (CL) (0 μm of thickness); M2 - CL with an uniform thickness of 50 μm; M3 - CL with 50 μm at the margin of ceramics and 100 μm in the inner area far from margins; M4 - CL with 50 μm at the margin of ceramics and 200 μm in the inner area far from margins.

Resynchronization improves reproductive efficiency of suckled Bos taurus beef cows subjected to spring-summer or autumn-winter breeding season in South Brazil.

The objective of the present study was to evaluate the effect of estrus resynchronization (RE) after the first Timed Artificial Insemination (TAI) protocol on reproductive efficiency of suckled Bos taurus beef cows (n = 1052; Angus and Brangus) subjected to two different breeding season (BS) in Rio Grande do Sul, Brazil. In experiment 1, cows were maintained in native pasture on conventional BS (spring-summer), and in experiment 2, cows were maintained in a grazing area cultivated in an integrated crop-livestock system on modified BS (autumn -winter). Experiment 1 cows (n = 92) were randomly distributed in two reproductive managements: 1) TAI at the first day of the BS (Day 0), followed by natural service (NS) on day 10 until the end of the BS (TAI + NS; n = 45) or, 2) TAI on day 0, followed by RE 22 days after the first TAI and then followed by NS on day 42 until the end of the BS (TAI + RE22 + NS; n = 47).

Impact of spontaneous Neospora caninum infection on pregnancy loss and subsequent pregnancy in grazing lactating dairy cows.

The impact of spontaneous Neospora caninum infection on pregnancy loss and subsequent pregnancy in grazing lactating dairy cows was evaluated. Data from 1273 females (878 multiparous and 395 first-calving cows) from six preselected dairy herds were analyzed. Cows were classified as seropositive (SP) (prevalence, 24%; range, 11%-33%) or seronegative (SN) by indirect immunofluorescence detection of antibodies against N caninum.

Stress distribution in delayed replanted teeth splinted with different orthodontic wires: a three-dimensional finite element analysis.

Aim: The aim was to evaluate the biomechanical behavior of the supporting bony structures of replanted teeth and the periodontal ligament (PDL) of adjacent teeth when orthodontic wires with different mechanical properties are applied, with three-dimensional finite element analysis.

Materials And Methods: Based on tomographic and microtomographic data, a three-dimensional model of the anterior maxilla with the corresponding teeth (tooth 13-tooth 23) was generated to simulate avulsion and replantation of the tooth 21. The teeth were splinted with orthodontic wire (Ø 0.

Effect of long-term storage on nanomechanical and morphological properties of dentin-adhesive interfaces.

Introduction: To evaluate the influence of storage time on the elastic modulus, micromorphology, nanoleakage, and micromechanical behavior of the dentin-adhesive interfaces of five adhesive systems (Scotchbond Multi-Purpose, Clearfil SE Bond, One Up Bond F, Adper Easy One, and Filtek LS Adhesive) after 24h (T0) and 12 months (T1).

Methods: Fifty teeth were restored and distributed according to each adhesive system (n=10). At least four specimens were obtained from each tooth.

Zirconia-based dental crown to support a removable partial denture: a three-dimensional finite element analysis using contact elements and micro-CT data.

Veneer fracture is the most common complication in zirconia-based restorations. The aim of this study was to evaluate the mechanical behavior of a zirconia-based crown in a lower canine tooth supporting removable partial denture (RPD) prosthesis, varying the bond quality of the veneer/coping interface. Microtomography (μCT) data of an extracted left lower canine were used to build the finite element model (M) varying the core material (gold core - MAu; zirconia core - MZi) and the quality of the veneer/core interface (complete bonded - MZi; incomplete bonded - MZi-NL).

Influence of platform and abutment angulation on peri-implant bone. A three-dimensional finite element stress analysis.

The aim of this study was to evaluate stress distribution on the peri-implant bone, simulating the influence of Nobel Select implants with straight or angulated abutments on regular and switching platform in the anterior maxilla, by means of 3-dimensional finite element analysis. Four mathematical models of a central incisor supported by external hexagon implant (13 mm × 5 mm) were created varying the platform (R, regular or S, switching) and the abutments (S, straight or A, angulated 15°). The models were created by using Mimics 13 and Solid Works 2010 software programs.

Biomechanical evaluation of internal and external hexagon platform switched implant-abutment connections: An in vitro laboratory and three-dimensional finite element analysis.

Objectives: The aim of this study was to assess the effect of abutment's diameter shifting on reliability and stress distribution within the implant-abutment connection for internal and external hexagon implants. The postulated hypothesis was that platform-switched implants would result in increased stress concentration within the implant-abutment connection, leading to the systems' lower reliability.

Methods: Eighty-four implants were divided in four groups (n=21): REG-EH and SWT-EH (regular and switched-platform implants with external connection, respectively); REG-IH and SWT-IH (regular and switched-platform implants with internal connection, respectively).

Straight and angulated abutments in platform switching: influence of loading on bone stress by three-dimensional finite element analysis.

Purpose: In view of reports in the literature on the benefits achieved with the use of platform switching, described as the use of an implant with a larger diameter than the abutment diameter, the goal being to prevent the (previously) normal bone loss down to the first thread that occurs around most implants, thus enhancing soft tissue aesthetics and stability and the need for implant inclination due to bone anatomy in some cases, the aim of this study was to evaluate bone stress distribution on peri-implant bone, by using three-dimensional finite element analysis to simulate the influence of implants with different abutment angulations (0 and 15 degrees) in platform switching.

Methods: Four mathematical models of an implant-supported central incisor were created with varying abutment angulations: straight abutment (S1 and S2) and angulated abutment at 15 degrees (A1 and A2), submitted to 2 loading conditions (100 N): S1 and A1-oblique loading (45 degrees) and S2 and A2-axial loading, parallel to the long axis of the implant. Maximum (σmax) and minimum (σmin) principal stress values were obtained for cortical and trabecular bone.

Bonding all-ceramic restorations with two resins cement techniques: a clinical report of three-year follow-up.

Ceramics have been widely used for esthetic and functional improvements. The resin cement is the material of choice for bonding ceramics to dental substrate and it can also dictate the final esthetic appearance and strength of the restoration. The correct use of the wide spectrum of resin luting agents available depends on the dental tooth substrate.

Recovering the function and esthetics of fractured teeth using several restorative cosmetic approaches. Three clinical cases.

The teeth most commonly affected by trauma are the maxillary central incisors. The most frequent types of traumatic dental injuries to permanent teeth are enamel fractures, enamel and dentine fractures, and enamel and dentine fractures with pulp involvement. This article describes three clinical cases with different levels of traumatized maxillary incisors and several cosmetic approaches for recovery of the esthetics and the masticatory function, as well as the social/psychological aspects of treatment.

Influence of voids in the hybrid layer based on self-etching adhesive systems: a 3-D FE analysis.

Unlabelled: The presence of porosities at the dentin/adhesive interface has been observed with the use of new generation dentin bonding systems. These porosities tend to contradict the concept that etching and hybridization processes occur equally and simultaneously. Therefore, the aim of this study was to evaluate the micromechanical behavior of the hybrid layer (HL) with voids based on a self-etching adhesive system using 3-D finite element (FE) analysis.