Cutting-edge collagen biocomposite reinforced with 2D nano-talc for bone tissue engineering.

The advancement of nanobiocomposites reinforced with 2D nano-materials plays a pivotal role in enhancing bone tissue engineering. In this study, we introduce a nanobiocomposite that reinforces bovine collagen with 2D nano-talc, a recently exfoliated nano-mineral. These nanobiocomposites were prepared by blending collagen with varying concentrations of 2D nano-talc, encompassing mono- and few-layers talc from soapstone nanomaterial.

Disentangling doping and strain effects at defects of grown MoS monolayers with nano-optical spectroscopy.

The role of defects in two-dimensional semiconductors and how they affect the intrinsic properties of these materials have been a widely researched topic over the past few decades. Optical characterization techniques such as photoluminescence and Raman spectroscopies are important tools to probe the physical properties of semiconductors and the impact of defects. However, confocal optical techniques present a spatial resolution limitation lying in a μm-scale, which can be overcome by the use of near-field optical measurements.

Poly(methylmethacrylate-co-dimethyl acrylamide)-silver nanocomposite prevents biofilm formation in medical devices.

To investigate whether medical devices coated with a synthesized nanocomposite of poly(methylmethacrylate-co-dimethyl acrylamide) (PMMDMA) and silver nanoparticles (AgNPs) could improve their antibiofilm and antimicrobial activities. We also investigated the nanocomposite's safety. The nanocomposite was synthesized and characterized using analytical techniques.

Miconazole-loaded nanoparticles coated with hyaluronic acid to treat vulvovaginal candidiasis.

Miconazole-loaded nanoparticles coated with hyaluronic acid (miconazole-loaded nanoparticles/HA) were developed to overcome the limitations of the conventional therapy of the vulvovaginal candidiasis (VVC). They were synthesized by emulsification and solvent evaporation techniques, characterized by diameter, polydispersity index, zeta potential, encapsulation efficiency, atomic force microscopy (AFM), evaluated in terms of efficacy against C. albicans in vitro, and tested in a murine VVC model.

Controlled Release and Cell Viability of Ketoconazole Incorporated in PEG 4000 Derivatives.

In recent years, polymeric materials have been gaining prominence in studies of controlled release systems to obtain improvements in drug administration. These systems present several advantages compared with conventional release systems, such as constant maintenance in the blood concentration of a given drug, greater bioavailability, reduction of adverse effects, and fewer dosages required, thus providing a higher patient compliance to treatment. Given the above, the present work aimed to synthesize polymeric matrices derived from polyethylene glycol (PEG) capable of promoting the controlled release of the drug ketoconazole in order to minimize its adverse effects.

Carbon nanotube-cellulose ink for rapid solvent identification.

In this work, a conductive ink based on microfibrillated cellulose (MFC) and multiwalled carbon nanotubes (MWCNTs) was used to produce transducers for rapid liquid identification. The transducers are simple resistive devices that can be easily fabricated by scalable printing techniques. We monitored the electrical response due to the interaction between a given liquid with the carbon nanotube-cellulose film over time.

Liquid phase exfoliation of talc: effect of the medium on flake size and shape.

Industrial applications of nanomaterials require large-scale production methods, such as liquid phase exfoliation (LPE). Regarding this, it is imperative to characterize the obtained materials to tailor parameters such as exfoliation medium, duration, and mechanical energy source to the desired applications. This work presents results of statistical analyses of talc flakes obtained by LPE in four different media.

Evaluation of Anti- Activity and Release of Ketoconazole in PMMA-G-PEG 4000 Films.

Modified release systems depend on the selection of an appropriate agent capable of controlling the release of the drug, sustaining the therapeutic action over time, and/or releasing the drug at the level of a particular tissue or target organ. Polyethylene glycol 4000 (PEG 4000) is commonly employed in drug release formulations while polymethyl methacrylate (PMMA) is non-toxic and has a good solubility in organic solvents. This study aimed at the incorporation of ketoconazole in PMMA-g-PEG 4000 and its derivatives, thus evaluating its release profile and anti- and cytotoxic activities.

Aerosol-Printed MoS Ink as a High Sensitivity Humidity Sensor.

Molybdenum disulfide (MoS) is attractive for use in next-generation nanoelectronic devices and exhibits great potential for humidity sensing applications. Herein, MoS ink was successfully prepared via a simple exfoliation method by sonication. The structural and surface morphology of a deposited ink film was analyzed by scanning electron microscopy (SEM), Raman spectroscopy, and atomic force microscopy (AFM).

Nanomechanics of few-layer materials: do individual layers slide upon folding?

Folds naturally appear on nanometrically thin materials, also called "2D materials", after exfoliation, eventually creating folded edges across the resulting flakes. We investigate the adhesion and flexural properties of single-layered and multilayered 2D materials upon folding in the present work. This is accomplished by measuring and modeling mechanical properties of folded edges, which allows for the experimental determination of the bending stiffness (κ) of multilayered 2D materials as a function of the number of layers ().

PLA-PEG nanospheres decorated with phage display selected peptides as biomarkers for detection of human colorectal adenocarcinoma.

Peptide-mediated targeting to colorectal cancer can increase selectivity and specificity of this cancer diagnosis acting as biomarkers. The present work aimed to select peptides using the phage display technique and associate the peptides with polymeric nanospheres in order to evaluate their cytotoxicity and selectivity during cell interaction with Caco-2 human colon tumor cell line. Two peptides identified by phage display (peptide-1 and peptide-2) were synthesized and exhibited purity higher than 84%.

Labeling PLA-PEG nanocarriers with IR780: physical entrapment versus covalent attachment to polylactide.

Near-infrared fluorescent dyes, such as IR780, are promising theranostics, acting as photosensitizers for photodynamic therapy and in vivo tracers in image-guided diagnosis. This work compared the uptake by macrophage-like cells of IR780 either physically associated or covalently attached to poly(D,L-lactide) (PLA) formulated as polymeric nanocapsules (NC) from a blend of PLA homopolymer and PLA-PEG block copolymer. The physicochemical characterization of both NC was conducted using asymmetric flow field-flow fractionation (AF4) analysis with static and dynamic light scattering and atomic force microscopy.

Gypsum: an environment-friendly, inexpensive and robust height calibration standard at nanometer-scale for atomic force microscopy.

Gypsum is an Earth-abundant mineral with enormous applications in agriculture and civil engineering. Here, we show it is also an excellent height calibration standard alternative for atomic force microscopy (AFM). Using plain water as etchant, gypsum flakes readily review 0.

Exfoliation and characterization of a two-dimensional serpentine-based material.

We report on an experimental investigation of serpentine, an abundant phyllosilicate, as an alternative source of two-dimensional (2D) nanomaterials. We show, through scanning probe microscopy (SPM) measurements, that natural serpentine mineral can be mechanically exfoliated down to few-layer flakes, where monolayers can be easily resolved. The parent serpentine bulk material was initially characterized via conventional techniques like XRD, XPS, FTIR and Raman spectroscopies and the results show that it is predominantly constituted by the antigorite mineral.

Compression-Induced Modification of Boron Nitride Layers: A Conductive Two-Dimensional BN Compound.

The ability to create materials with improved properties upon transformation processes applied to conventional materials is the keystone of materials science. Here, hexagonal boron nitride (h-BN), a large-band-gap insulator, is transformed into a conductive two-dimensional (2D) material- bonitrol-that is stable at ambient conditions. The process, which requires compression of at least two h-BN layers and hydroxyl ions, is characterized via scanning probe microscopy experiments and ab initio calculations.

Universal deformation pathways and flexural hardening of nanoscale 2D-material standing folds.

In the present work, we use atomic force microscopy nanomanipulation of 2D-material standing folds to investigate their mechanical deformation. Using graphene, h-BN and talc nanoscale wrinkles as testbeds, universal force-strain pathways are clearly uncovered and well-accounted for by an analytical model. Such universality further enables the investigation of each fold bending stiffness κ as a function of its characteristic height h .

Multi-walled carbon nanotubes functionalized with recombinant Dengue virus 3 envelope proteins induce significant and specific immune responses in mice.

Background: Dengue is the most prevalent arthropod-borne viral disease in the world. In this article we present results on the development, characterization and immunogenic evaluation of an alternative vaccine candidate against Dengue.

Methods: The MWNT-DENV3E nanoconjugate was developed by covalent functionalization of carboxylated multi-walled carbon nanotubes (MWNT) with recombinant dengue envelope (DENV3E) proteins.

Charge transfer between carbon nanotubes on surfaces.

The charge transfer between neighboring single-walled carbon nanotubes (SWNTs) on a silicon oxide surface was investigated as a function of both the SWNT nature (metallic or semiconducting) and the anode/cathode distance using scanning probe techniques. Two main mechanisms were observed: a direct electron tunneling described by the typical Fowler-Nordheim model, and indirect electron transfer (hopping) mediated by functional groups on the supporting surface. Both mechanisms depend on the SWNT nature and on the anode/cathode separation: direct electron tunneling dominates the charge transfer process for metallic SWNTs, especially for large distances, while both mechanisms compete with each other for semiconducting SWNTs, prevailing one over the other depending on the anode/cathode separation.

Dynamic negative compressibility of few-layer graphene, h-BN, and MoS2.

We report a novel mechanical response of few-layer graphene, h-BN, and MoS(2) to the simultaneous compression and shear by an atomic force microscope (AFM) tip. The response is characterized by the vertical expansion of these two-dimensional (2D) layered materials upon compression. Such effect is proportional to the applied load, leading to vertical strain values (opposite to the applied force) of up to 150%.

Controlling the electrical behavior of semiconducting carbon nanotubes via tube contact.

The electromechanical behavior of single-walled carbon nanotubes (SWNTs) in contact with different materials is investigated by scanning probe microscopy. An anomalous diamond/semiconducting nanotube behavior is observed, which is consistent with ab initio calculations: the formation of a broken-gap heterojunction between semiconducting SWNTs and a hydrogenated diamond surface results in a metallic response for such SWNTs.

Modulating the electronic properties along carbon nanotubes via tube-substrate interaction.

We study single wall carbon nanotubes (SWNTs) deposited on quartz. Their Raman spectrum depends on the tube-substrate morphology, and in some cases, it shows that the same SWNT-on-quartz system exhibits a mixture of semiconductor and metal behavior, depending on the orientation between the tube and the substrate. We also address the problem using electric force microscopy and ab initio calculations, both showing that the electronic properties along a single SWNT are being modulated via tube-substrate interaction.