Incidental Findings Following Dental Implant Procedures in the Mandible: A New Post-Processing CBCT Software Analysis.

: The aim of this study was to evaluate incidental findings in the mandible after the placement of dental implants using a new cone-beam computed tomography (CBCT) software. : The initial sample consisted of 2872 CBCT scans of patients of both sexes. The parameters evaluated in this study were the location of the implants in the mandible, implant length, anatomical relationship of the implant with the mandibular canal, presence or absence of damage to the adjacent teeth, presence or absence of implant fractures, and presence or absence of bone support.

Comparative effectiveness of preemptive administration of ibuprofen and ibuprofen-arginine on the anesthetic success of inferior alveolar nerve block in teeth with symptomatic irreversible pulpitis - A double-blind randomized clinical trial.

Objectives: This study examined the impact of premedication with ibuprofen and ibuprofen-arginine and the influence of preoperative pain and anxiety on inferior alveolar nerve block (IANB) efficacy in cases of symptomatic irreversible pulpitis.

Materials And Methods: The study involved 150 SIP patients who were randomly assigned to receive ibuprofen (600 mg), ibuprofen-arginine (1,155 mg), or a placebo 30 min before IANB. Preoperative anxiety and pain levels were assessed using the Modified Dental Anxiety Scale and the Heft-Parker visual scale.

Does irradiation of the tooth structure interfere with oxygen saturation measured by pulse oximetry?-An ex vivo laboratorial study.

The effect of tooth structure subjected to ionising radiation on oxygen saturation levels (SpO ) measured by pulse oximetry was investigated. Fifty-four extracted human third molars were sectioned mesiodistally. Pulse oximeter diodes were placed in prefabricated silicone moulds, secured on a vise with tooth surfaces placed between the diodes and the participant's finger, and SpO levels were measured.

Effect of low-power diode laser on infected root canals.

This study evaluated the effect of photodynamic therapy (PDT) on infected root canals. Twenty-one human teeth were selected, and 18 were infected by E. faecalis for 60 days.

Evaluation in the danger zone of mandibular molars after root canal preparation using novel CBCT software.

This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation.

Comparative analysis of bond strength to root dentin and compression of bioceramic cements used in regenerative endodontic procedures.

Objectives: This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression.

Materials And Methods: Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed ( = 18). After insertion of the bioceramic materials, the push-out test was performed.

Interference of coronal enamel and dentin thickness and ambient light on pulse oximetry interpretation.

This study evaluated the interference of enamel and coronal dentin thickness and ambient light in pulse oximetry interpretation, using SaO2the human finger as a reference. Forty-two intact human permanent mandibular molars were sectioned mesiodistally in the central portion. Buccal and lingual dentin surfaces were drilled, and 4 mm, 3 mm and 2 mm enamel/dentin thicknesses were interposed between finger and device, after which SaO2 levels were measured by finger pulse oximetry.

CBCT assessment of bone thickness in maxillary and mandibular teeth: an anatomic study.

Objective: The site of the sinus tract depends on the rate of resistance against abscess exudate drainage, bone morphology, and distance from the root apex to the outer cortical bone. To assess apical bone thickness in buccal and palatal/lingual aspects of maxillary and mandibular teeth, using a high-resolution cone-beam computed tomography (CBCT) system.

Methodology: In total, 422 CBCT examinations were included in the study, resulting in a sample of 1400 teeth.

Effect of dental bleaching on pulp oxygen saturation in maxillary central incisors - a randomized clinical trial.

Objective: To assess pulp oxygen saturation levels (SaO2) in maxillary central incisors after dental bleaching.

Materials And Methods: 80 participants (160 teeth) were randomly allocated to four groups: G1 In-office bleaching with two applications of 35% hydrogen peroxide (HP) (20 minutes), followed by at-home bleaching with 10% carbamide peroxide (CP) (2 hours/day for 16 days); G2 - Same protocol as G1, plus desensitizing toothpaste; G3 - In-office bleaching with 35% HP and one application of placebo gel (20 minutes), followed by at-home bleaching with 10% CP (2 hours/day for 16 days); and G4 - Same protocol as G3, plus desensitizing toothpaste. Pulp SaO2 levels were measured before (T0) and immediately after (T1) in-office bleaching; on the 5th (T2), 8th (T3), 12th (T4), and 16th days of at-home bleaching (T5); and on the 7th (T6) and 30th (T7) days.

Evaluation of crown inclination and angulation after orthodontic treatment using digital models : Comparison to the prescription of the brackets used.

Purpose: To compare crown inclination and angulation results obtained after orthodontic treatment to the Roth prescription.

Methods: The study design was based on files and documents obtained from a database of 26 patients who had undergone orthodontic treatment using the straight-wire technique and the Roth prescription. The crown inclination and angulation were measured using a three-dimensional (3D) cephalometric module (VistaDent, Dentsply, New York, NY, USA) by an orthodontist.

Correlation of Crown Angulation and Inclination Based on Occlusal, Camper's, and Frankfurt Planes Using Digital Models.

This study provided the measures of crown angulations and inclinations which were evaluated using 3D cephalometry. This study was conducted to demonstrate the relationship between the main planes : Camper's, Frankfurt, and occlusalplanes for guiding the positioning ofthe skull and orthodontic planning.

Working Length Determination Using Cone-Beam Computed Tomography, Periapical Radiography and Electronic Apex Locator in Teeth with Apical Periodontitis: A Clinical Study.

Introduction: The purpose of this clinical study was to compare the accuracy of working length (WL) determination using cone-beam computed tomography (CBCT), conventional periapical radiographies and electronic apex locator.

Methods And Materials: This study was conducted during root canal treatment of 19 patients with a total of 30 single-rooted teeth diagnosed with apical periodontitis. After taking the initial parallel periapical radiographies, the initial file was advanced into the canal until the WL was detected by the apex locator.

Antibacterial Potential of 2.5% Sodium Hypochlorite in Distinct Irrigation Protocols on Enterococcus faecalis Biofilm.

Objective: The aim of this study was to evaluate the effect of irrigation methods on antibacterial potential of 2.5% NaOCl on Enterococcus faecalis biofilm.

Materials And Methods: Enterococcus faecalis biofilms were prepared during 60 days on 48 human root canals and randomized into control and experimental groups using positive and negative pressure irrigation.

Cone-beam computed tomography as a diagnostic method for determination of gingival thickness and distance between gingival margin and bone crest.

The objective of the present study was to assess cone-beam computed tomography (CBCT) as a diagnostic method for determination of gingival thickness (GT) and distance between gingival margin and vestibular (GMBC-V) and interproximal bone crests (GMBC-I). GT and GMBC-V were measured in 348 teeth and GMBC-I was measured in 377 tooth regions of 29 patients with gummy smile. GT was assessed using transgingival probing (TP), ultrasound (US), and CBCT, whereas GMBC-V and GMBC-I were assessed by transsurgical clinical evaluation (TCE) and CBCT.

Chemical and structural characterization of glass ionomer cements indicated for atraumatic restorative treatment.

Glass ionomer cements (GICs) are restorative materials, which clinical use has increased significantly during the last decade. The aim of the present study was to analyze the chemical constitution and surface morphology of four glass ionomer cements: Maxxion R, VitroFill, Vidrion R and Vitremer. Twelve polyethylene tubes with an internal diameter of 3 and 3 mm in length were prepared, filled and then transferred to a chamber with 95% relative humidity and a temperature of 37°C.

The use of three-dimensional cephalometric references in dentoskeletal symmetry diagnosis.

Objective: The aim of this study is to assess dentoskeletal symmetry in cone-beam computed tomography (CBCT) scans of Brazilian individuals with Angle Class I malocclusion.

Material: A total of 47 patients (22 females and 25 males) aged between 11 and 16 years old (14 years) seen in a private radiology service (CIRO, Goiânia, GO, Brazil) were assessed. All CBCT scans were obtained from January, 2009 to December, 2010.

Assessment of oxygen saturation in dental pulp of permanent teeth with periodontal disease.

Introduction: In individuals with periodontal disease, dental pulp status should be determined before a treatment plan is made. Pulse oximeters are promising diagnostic tools to evaluate pulp vascularization. This study used pulse oximetry to determine the level of oxygen saturation in dental pulp of intact permanent teeth with periodontal attachment loss (PAL) and gingival recession (GR) and to evaluate the correlation between periodontal disease and level of oxygen saturation in the pulp.

Oxygen saturation in the dental pulp of permanent teeth: a critical review.

Introduction: Pulse oximetry is a noninvasive method for assessing vascular health based on oxygen saturation level. The method has recently also been used to assess dental pulp vitality, but a median oxygen saturation level suggestive of normal pulp physiology has not been determined. The objective of this study was to make a critical analysis of the published research to establish the median oxygen saturation for the diagnosis of normal dental pulps in maxillary anterior permanent teeth using pulse oximetry.

Long-term evaluation of apical root resorption after orthodontic treatment using periapical radiography and cone beam computed tomography.

Objective: To evaluate the frequency of Apical Root Resorption (ARR) after orthodontic treatment at 52-288 months using periapical radiography (PR) and cone beam computed tomography (CBCT).

Methods: Radiographic images obtained from 58 patients, before (T1) and after orthodontic treatment (T2), and following 52-288 months of treatment were analyzed by three members of the Brazilian Board of Orthodontics. Apical structures were evaluated by PR images (T2 and T3), using Levander and Malmgren scores.

Three-dimensional images contribute to the diagnosis of mucous retention cyst in maxillary sinus.

Objective: To evaluate the detection of mucous retention cyst of maxillary sinus (MRCMS) using panoramic radiography and cone beam computed tomography (CBCT).

Study Design: A digital database with 6,000 panoramic radiographs was reviewed for MRCMS. Suggestive images of MRCMS were detected on 185 radiographs, and patients were located and invited to return for follow-up.

Effect of root canal filling materials on dimensions of cone-beam computed tomography images.

Objective: To evaluate the discrepancy of root canal filling (RCF) measurements obtained from original root specimens and cone-beam computed tomography (CBCT) images.

Material And Methods: Seventy-two human maxillary anterior teeth were prepared up to an ISO #50 K-File 1 mm short of the apical foramen. Thus, the teeth were randomly divided into 8 groups, according to the root canal filling material: Sealapex®, Sealapex®+gutta-percha points, Sealer 26®, Sealer 26®+gutta-percha points, AH PlusTM, AH PlusTM+gutta-percha points, Grossman Sealer, and Grossman Sealer+gutta-percha points.

Three-dimensional image contribution for evaluation of operative procedural errors in endodontic therapy and dental implants.

Acceptable therapeutic protocol in dentistry depends on the outcomes obtained with follow up. Operative procedural errors (OPE) may occur and they represent risk factors able to compromise a tooth or a dental implant. The aim of this study was to detect the OPE in endodontically treated teeth and dental implants, using cone beam computed tomography (CBCT).

Mesenchymal stem cells in the dental tissues: perspectives for tissue regeneration.

In recent years, stem cell research has grown exponentially owing to the recognition that stem cell-based therapies have the potential to improve the life of patients with conditions that range from Alzheimer's disease to cardiac ischemia and regenerative medicine, like bone or tooth loss. Based on their ability to rescue and/or repair injured tissue and partially restore organ function, multiple types of stem/progenitor cells have been speculated. Growing evidence demonstrates that stem cells are primarily found in niches and that certain tissues contain more stem cells than others.

Intraosseous lipoma in the periapical region of a maxillary third molar.

Introduction: Images of oral lesions can look so exceptionally similar that a diagnosis hypothesis could be difficult. Lesions mimicking apical periodontitis must be considered when making a differential diagnosis. Intraosseous lipoma is a rare benign tumor of low incidence among all bone tumors, and therefore few cases have been reported in the literature.

Procedural errors during root canal preparation using rotary NiTi instruments detected by periapical radiography and cone beam computed tomography.

This study detected procedural errors created by rotary nickel-titanium (NiTi) instruments during root canal preparation by two imaging methods. Forty extracted human maxillary and mandibular molars were divided randomly into two groups and treated by two endodontists (n=10) and two undergraduate dental students (n=10). The ProTaper Universal Rotary System was used to shape the canals and then they were filled using AH Plus sealer and gutta-percha.