Mix and measure II: joint high-energy laboratory powder diffraction and microtomography for cement hydration studies.

Portland cements (PCs) and cement blends are multiphase materials of different fineness, and quantitatively analysing their hydration pathways is very challenging. The dissolution (hydration) of the initial crystalline and amorphous phases must be determined, as well as the formation of labile (such as ettringite), reactive (such as portlandite) and amorphous (such as calcium silicate hydrate gel) components. The microstructural changes with hydration time must also be mapped out.

Recent Advances in C-S-H Nucleation Seeding for Improving Cement Performances.

Reducing cement CO footprint is a societal need. This is being achieved mainly by replacing an increasing amount of Portland clinker by supplementary cementitious materials. However, this comes at a price: lower mechanical strengths at early ages due to slow pozzolanic reaction(s).

Portland and Belite Cement Hydration Acceleration by C-S-H Seeds with Variable / Ratios.

The acceleration of very early age cement hydration by C-S-H seeding is getting attention from scholars and field applications because the enhanced early age features do not compromise later age performances. This acceleration could be beneficial for several low-CO cements as a general drawback is usually the low very early age mechanical strengths. However, the mechanistic understanding of this acceleration in commercial cements is not complete.

Accuracy in Cement Hydration Investigations: Combined X-ray Microtomography and Powder Diffraction Analyses.

Cement hydration is a very complex set of processes. The evolution of the crystalline phases during hydration can be accurately followed by X-ray powder diffraction data evaluated by the Rietveld method. However, accurate measurements of some microstructural features, including porosity and amorphous content developments, are more challenging.

Depressed indurated plaque with elastorrhexis as a distinctive lesion in Buschke-Ollendorff syndrome.

Buschke-Ollendorff syndrome (BOS) is a rare autosomal dominant genodermatosis caused by heterozygous mutations in LEMD3 and characterized by connective tissue nevi and sclerotic bone lesions known as osteopoikilosis. We report a family with three individuals affected by BOS, two of whom manifested clinical and histopathological peculiarities, presenting with a depressed indurated plaque as the main cutaneous manifestation instead of the classic connective tissue nevi. Notable elastorrhexis was present in both biopsies.

NH/HO-mediated proton conductivity and photocatalytic behaviour of Fe(ii)-hydroxyphosphonoacetate and M(ii)-substituted derivatives.

Synthesis redesign and derivatisation of Fe(ii)-hydroxyphosphonoacetate, incorporating different ammonia loads and M(ii) isomorphic substitutions (M = Mn, Co and Zn), have been implemented. The NH adsorption led to materials with enhanced proton conductivity, up to ∼10 S cm, although it caused a progressive amorphization. The Pair Distribution Function (PDF) analysis for this material confirmed the loss of crystallinity but the local order appeared to be maintained.

High-pressure and -temperature spinning capillary cell for in situ synchrotron X-ray powder diffraction.

In situ research of materials under moderate pressures (hundreds of bar) is essential in many scientific fields. These range from gas sorption to chemical and biological processes. One industrially important discipline is the hydration of oil well cements.

Rietveld Quantitative Phase Analysis of Oil Well Cement: In Situ Hydration Study at 150 Bars and 150 °C.

Oil and gas well cements are multimineral materials that hydrate under high pressure and temperature. Their overall reactivity at early ages is studied by a number of techniques including through the use of the consistometer. However, for a proper understanding of the performance of these cements in the field, the reactivity of every component, in real-world conditions, must be analysed.

Quantitative disentanglement of nanocrystalline phases in cement pastes by synchrotron ptychographic X-ray tomography.

Mortars and concretes are ubiquitous materials with very complex hierarchical microstructures. To fully understand their main properties and to decrease their CO footprint, a sound description of their spatially resolved mineralogy is necessary. Developing this knowledge is very challenging as about half of the volume of hydrated cement is a nanocrystalline component, calcium silicate hydrate (C-S-H) gel.

A Comparative Study of Experimental Configurations in Synchrotron Pair Distribution Function.

The identification and quantification of amorphous components and nanocrystalline phases with very small crystal sizes, smaller than ~3 nm, within samples containing crystalline phases is very challenging. However, this is important as there are several types of systems that contain these matrices: building materials, glass-ceramics, some alloys, etc. The total scattering synchrotron pair distribution function (PDF) can be used to characterize the local atomic order of the nanocrystalline components and to carry out quantitative analyses in complex mixtures.

Multiscale understanding of tricalcium silicate hydration reactions.

Tricalcium silicate, the main constituent of Portland cement, hydrates to produce crystalline calcium hydroxide and calcium-silicate-hydrates (C-S-H) nanocrystalline gel. This hydration reaction is poorly understood at the nanoscale. The understanding of atomic arrangement in nanocrystalline phases is intrinsically complicated and this challenge is exacerbated by the presence of additional crystalline phase(s).

Competitive Swimming and Racial Disparities in Drowning.

This paper provides compelling evidence of an inverse relationship between competitive swimming rates and drowning rates using Centers for Disease Control and Prevention (CDC) data on fatal drowning rates and membership rates from USA Swimming, the governing organization of competitive swimming in the United States. Tobit and Poisson regression models are estimated using panel data by state from 1999-2007 separately for males, females, African Americans and whites. The strong inverse relationship between competitive swimming rates and unintentional deaths through fatal drowning is most pronounced among African Americans males.

Mechanism of stabilization of dicalcium silicate solid solution with aluminium.

Stoichiometric dicalcium silicate, Ca2SiO4, displays a well-known polymorphism with temperature. When this phase is doped by a range of elements, belite, one of the main phases of cements, is generated. Here, we thoroughly study the aluminum doping of dicalcium silicate.

In situ powder diffraction study of belite sulfoaluminate clinkering.

Belite sulfoaluminate (BSA) cements have been proposed as environmentally friendly building materials, as their production may release up to 35% less CO(2) into the atmosphere when compared with ordinary Portland cement fabrication. However, their formation mechanism has not been studied in detail so far. Here, an in situ high-temperature high-resolution synchrotron X-ray powder diffraction study is reported.

Evolutionary and structural analyses of GDAP1, involved in Charcot-Marie-Tooth disease, characterize a novel class of glutathione transferase-related genes.

Mutations in the Ganglioside-induced differentiation-associated protein-1 (GDAP1) gene cause autosomal recessive Charcot-Marie-Tooth disease type 4A. The protein encoded by GDAP1 shows clear similarity to glutathione transferases (also known as glutathione S-transferases or GSTs). The human genome contains a paralog of GDAP1 called GDAP1L1.

The gene encoding ganglioside-induced differentiation-associated protein 1 is mutated in axonal Charcot-Marie-Tooth type 4A disease.

We identified three distinct mutations and six mutant alleles in GDAP1 in three families with axonal Charcot-Marie-Tooth (CMT) neuropathy and vocal cord paresis, which were previously linked to the CMT4A locus on chromosome 8q21.1. These results establish the molecular etiology of CMT4A (MIM 214400) and suggest that it may be associated with both axonal and demyelinating phenotypes.