Free-Standing, Water-Resistant, and Conductivity-Enhanced PEDOT:PSS Films from In Situ Polymerization of 3-Hydroxymethyl-3-Methyl-Oxetane.

Free-standing films based on conducting polymers, such as poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS), offer many benefits over traditional metal electrodes for applications in flexible electronics. However, to ensure structural integrity when contacting aqueous environments and high levels of electrical conductivity, solution-processed polymers require additives that act as crosslinking agents and conductivity enhancers. In this work, a new approach is presented to fabricate water-resistant free-standing films of PEDOT:PSS and simultaneously increase their conductivity, using an oxetane compound as an additive.

The Nanoscale Structure and Stability of Organic Photovoltaic Blends Processed with Solvent Additives.

Controlling the nanomorphology in bulk heterojunction photoactive blends is crucial for optimizing the performance and stability of organic photovoltaic (OPV) technologies. A promising approach is to alter the drying dynamics and consequently, the nanostructure of the blend film using solvent additives such as 1,8-diiodooctane (DIO). Although this approach is demonstrated extensively for OPV systems incorporating fullerene-based acceptors, it is unclear how solvent additive processing influences the morphology and stability of nonfullerene acceptor (NFA) systems.

Effect of HDI-Modified GO on the Thermoelectric Performance of Poly(3,4-ethylenedioxythiophene):Poly(Styrenesulfonate) Nanocomposite Films.

Composite films based on conducting polymers and carbon nanomaterials have attracted much attention for applications in various devices, such as chemical sensors, light-emitting diodes (LEDs), organic solar cells (OSCs), among others. Graphene oxide (GO) is an ideal filler for polymeric matrices due to its unique properties. However, GO needs to be functionalized to improve its solubility in common solvents and enable the processing by low-cost solution deposition methods.

Conducting neutral gold bisdithiolene complex [Au(dspdt)]˙.

[Au(dspdt)2] (dspdt = 2,3-dihydro-5,6-selenophenedithiolate) is an unprecedented example of a neutral gold bisdithiolene complex with a unique structure composed of interacting dimer and trimer chains displaying relatively high electrical conductivity (0.1 S cm-1 at room temperature).

Combined Organic Photovoltaic Cells and Ultra Low Power CMOS Circuit for Indoor Light Energy Harvesting.

This paper describes an energy harvesting system composed of an organic photovoltaic cell (OPV) connected to a DC-DC converter, designed in a 130 nm Complementary Metal-Oxide-Semiconductor (CMOS) technology, with a quasi- maximum power point tracking (MPPT) algorithm to maximize the system efficiency, for indoor applications. OPVs are an emerging technology with potential for low cost indoor light energy harvesting. The OPV current-voltage curves (I-V) under an irradiance of solar simulator Oriel Sol 3A, at room temperature, are obtained and an accurate electrical model is derived.

Towards the Development of a Low-Cost Device for the Detection of Explosives Vapors by Fluorescence Quenching of Conjugated Polymers in Solid Matrices.

Conjugated polymers (CPs) have proved to be promising chemosensory materials for detecting nitroaromatic explosives vapors, as they quickly convert a chemical interaction into an easily-measured high-sensitivity optical output. The nitroaromatic analytes are strongly electron-deficient, whereas the conjugated polymer sensing materials are electron-rich. As a result, the photoexcitation of the CP is followed by electron transfer to the nitroaromatic analyte, resulting in a quenching of the light-emission from the conjugated polymer.

Boron complexes of aromatic ring fused iminopyrrolyl ligands: synthesis, structure, and luminescence properties.

The condensation reactions of 2-formylindole (1) or 2-formylphenanthro[9,10-c]pyrrole (2) with various aromatic amines afforded the corresponding phenyl or phenanthrene ring fused mono-/bis-iminopyrrole ligand precursors 3-8, which, upon reaction with BPh in an appropriate molar ratio, led to the new mono- and diboron chelate compounds PhB[NCHC(H)[double bond, length as m-dash]N-2,6-Ar] (Ar = 2,6-iPrCH9; CH10), PhB[(NCHC(H)[double bond, length as m-dash]N)-1,4-CH]BPh11, PhB(NCHC(H)[double bond, length as m-dash]N-Ar) (Ar = 2,6-iPrCH12; CH13), and PhB[(NCHC(H)[double bond, length as m-dash]N)-1,4-CH]BPh14, respectively. Boron complexes 12-14, containing a phenanthrene fragment fused to the pyrrolyl C3-C4 bond, are highly fluorescent in solution, with quantum efficiencies of 37%, 61% and 58% (in THF), respectively, their emission colours ranging from blue to orange depending on the extension of π-conjugation. Complexes 9-11, containing a benzene fragment fused to the pyrrolyl C4-C5 bond, are much weaker emitters, exhibiting quantum efficiencies of 10%, 7% and 6%, respectively.

Luminescent Di- and Trinuclear Boron Complexes Based on Aromatic Iminopyrrolyl Spacer Ligands: Synthesis, Characterization, and Application in OLEDs.

New bis- and tris(iminopyrrole)-functionalized linear (1,2-(HNC4 H3 -C(H)N)2 -C6 H4 (2), 1,3-(HNC4 H3 -C(H)N)2 -C6 H4 (3), 1,4-(HNC4 H3 -C(H)N)2 -C6 H4 (4), 4,4'-(HNC4 H3 -C(H)N)2 -(C6 H4 -C6 H4 ) (5), 1,5-(HNC4 H3 C-(H)N)2 -C10 H6 (6), 2,6-(HNC4 H3 C-(H)N)2 -C10 H6 (7), 2,6-(HNC4 H3 C-(H)N)2 -C14 H8 (8)) and star-shaped (1,3,5-(HNC4 H3 -C(H)N-1,4-C6 H4 )3 -C6 H3 (9)) π-conjugated molecules were synthesized by the condensation reactions of 2-formylpyrrole (1) with several aromatic di- and triamines. The corresponding linear diboron chelate complexes (Ph2 B[1,3-bis(iminopyrrolyl)-phenyl]BPh2 (10), Ph2 B[1,4-bis(iminopyrrolyl)-phenyl]BPh2 (11), Ph2 B[4,4'-bis(iminopyrrolyl)-biphenyl]BPh2 (12), Ph2 B[1,5-bis(iminopyrrolyl)-naphthyl]BPh2 (13), Ph2 B[2,6-bis(iminopyrrolyl)-naphthyl]BPh2 (14), Ph2 B[2,6-bis(iminopyrrolyl)-anthracenyl]BPh2 (15)) and the star-shaped triboron complex ([4',4'',4'''-tris(iminopyrrolyl)-1,3,5-triphenylbenzene](BPh2 )3 (16)) were obtained in moderate to good yields, by the treatment of 3-9 with B(C6 H5 )3 . The ligand precursors are non-emissive, whereas most of their boron complexes are highly fluorescent; their emission color depends on the π-conjugation length.

Improving the Efficiency of Organic Solar Cells upon Addition of Polyvinylpyridine.

We report on the efficiency improvement of organic solar cells (OPVs) based on the low energy gap polyfluorene derivative, APFO-3, and the soluble C fullerene PCBM, upon addition of a residual amount of poly (4-vinylpyridine) (PVP). We find that the addition of 1% by weight of PVP with respect to the APFO-3 content leads to an increase of efficiency from 2.4% to 2.

Tunable fluorophores based on 2-(N-arylimino)pyrrolyl chelates of diphenylboron: synthesis, structure, photophysical characterization, and application in OLEDs.

Reactions of 2-(N-arylimino)pyrroles (HNC4H3C(H)=N-Ar) with triphenylboron (BPh3) in boiling toluene afford the respective highly emissive N,N'-boron chelate complexes, [BPh2 {κ(2)N,N'-NC4H3C(H)=N-Ar}] (Ar=C6H5 (12), 2,6-Me2-C6H3 (13), 2,6-iPr2-C6H3 (14), 4-OMe-C6H4 (15), 3,4-Me2-C6 H3 (16), 4-F-C6H4 (17), 4-NO2-C6H4 (18), 4-CN-C6H4 (19), 3,4,5-F3-C6H2 (20), and C6F5 (21)) in moderate to high yields. The photophysical properties of these new boron complexes largely depend on the substituents present on the aryl rings of their N-arylimino moieties. The complexes bearing electron-withdrawing aniline substituents 17-20 show more intense (e.

Syntheses and photophysical properties of new iminopyrrolyl boron complexes and their application in efficient single-layer non-doped OLEDs prepared by spin coating.

Efficient non-doped OLEDs have been achieved using new binuclear tetracoordinate organoboron complexes containing 2-(N-aryl)formiminopyrrolyl ligands.

Fabrication of conjugated polymers nanostructures via direct near-field optical lithography.

We report our investigations into the fabrication of nanostructures of poly(p-phenylene vinylene) via direct scanning near-field lithography of its soluble precursor. Our technique is based on the spatially selective inhibition of the precursor solubility by exposure to the ultraviolet optical field present at the apex of commercially available, Au-coated near-field probes with aperture diameters between 40 and 80 nm (+/-5 nm). After development in methanol and thermal conversion under vacuum we obtain features with a minimum dimension of 160 nm.