A Comprehensive Investigation of Methanol Electrooxidation on Copper Anodes: Spectroelectrochemical Insights and Energy Conversion in Microfluidic Fuel Cells.

Here, we comprehensively investigated methanol electrooxidation on Cu-based catalysts, allowing us to build the first microfluidic fuel cell (μFC) equipped with a Cu anode and a metal-free cathode that converts energy from methanol. We applied a simple, fast, small-scale, and surfactant-free strategy for synthesizing Cu-based nanoparticles at room temperature in steady state (ST), under mechanical stirring (MS), or under ultrasonication (US). The morphology evaluation of the Cu-based samples reveals that they have the same nanoparticle (NP) needle-like form.

Towards the valorisation of glycerol by designing the surface chemistry of carbon xerogels by doping and oxygen functionalization.

Research on innovative approaches to the valorisation of glycerol as a subproduct of biodiesel production has acquired an increasing demand in the development of a circular economy around energy generation, especially, in the line of improvement of the heterogeneous metallic catalysts used. In this regard, carbon xerogels have gained importance due to their stability and modifiability, while transition metals such as copper stand out as a cost-effective alternative, resulting in a technology where surface engineering plays a crucial role in achieving competitive catalytic activity. Building upon this, current research evaluates doped xerogels (Si, N, or GO) as supports of Cu and catalysts by themselves for glycerol oxidation.

Synthesis of Ni-Doped Graphene Aerogels for Electrochemical Applications.

Carbonaceous materials used in most electrochemical applications require high specific surface area, adequate pore size distribution, and high electrical conductivity to ensure good interaction with the electrolyte and fast electron transport. The development of transition metal doped graphene aerogels is a possible solution, since their structure, morphology, and electrical properties can be controlled during the synthesis process. This work aims to synthesize Ni-doped graphene aerogels to study the role of different nickel salts in the sol-gel reaction and their final properties.

Electrochemical Performance of Symmetric Solid-State Supercapacitors Based on Carbon Xerogel Electrodes and Solid Polymer Electrolytes.

For the development and optimization of solid-state symmetrical supercapacitors, herein, we propose using carbon-based electrodes and sodium- and lithium-form Aquivion electrolyte membranes, which serve as the separator and electrolyte. Carbon xerogels, synthesized using microwave-assisted sol-gel methodology, with designed and controlled properties were obtained as electrode materials. Commercial activated carbon (YP-50F, "Kuraray Europe" GmbH) was used as the active material for comparison.

Microwave-Assisted Synthesis of Iron-Based Aerogels with Tailored Textural and Morphological Properties.

Iron aerogels have been synthesized by microwave heating for the first time. Therefore, it is essential to optimize this synthesis process to evaluate the possibility of obtaining nanometric materials with tailored properties and fitting them to the needs of different applications. Herein, the effect of the ratio between reagents and the time of synthesis on the final textural, morphological, and structural properties has been evaluated.

CuO metallic aerogels with a tailored nodular morphology.

This work reports, for the first time, an efficient and fast microwave-based method for the preparation of CuO aerogels. For that, CuCl, glyoxylic acid and sodium carbonate are employed as reagents. Different experimental conditions such as synthesis temperature, synthesis time and concentration of the precursor solution are investigated to design CuO aerogels with customizable nodular morphologies.

Reduced Graphene Oxide Aerogels Cartridges for Solid Phase Extraction of Benzotriazoles.

UV-benzotriazoles have been identified as water micropollutants that cause serious problems for human health and the environment. Their low concentration in water bodies complicates their detection by direct water analysis, slowing the corrective actions to avoid bioaccumulation. In this regard, the use of graphene-based materials with a high affinity for non-polar molecules has been demonstrated to be a potential tool for the optimal separation and concentration of this type of molecules in solid phase extraction (SPE) processes.

Synthesis of Micro- and Mesoporous Carbon Foams with Nanodispersed Metals for Adsorption and Catalysis Applications.

This work focuses on carbon foams, whose peculiarity is a predominant open macroporous cellular network that can be provided with tailored texture and morphology by the modification of the preparation process. The goal was to obtain macroporous carbonaceous structures capable of being activated by following a simple thermo-foaming procedure using a few reagents. With this purpose in mind, carbon foams with different textural properties were synthesized from sucrose using two foaming processes: at atmospheric pressure and in a pressurized reactor.

Role of Crystalline Si and SiC Species in the Performance of Reduced Hybrid C/Si Gels as Anodes for Lithium-Ion Batteries.

In recent years, the research on lithium-ion batteries (LIBs) to improve their lifetime, efficiency and energy density has led to the use of silicon-based materials as a promising anode alternative to graphite. Specifically, crystalline silicon (Si) and silicon carbide (SiC) obtained from deposition or reduction processes (e.g.

Facile Synthesis of Unsupported Pd Aerogel for High Performance Formic Acid Microfluidic Fuel Cell.

In this work, unsupported Pd aerogel catalysts were synthesized for the very first time by using microwaves as a heating source followed by a lyophilization drying process and used towards formic acid electro-oxidation in a microfluidic fuel cell. Aerogels were also made by heating in a conventional oven to evaluate the microwave effect during the synthesis process of the unsupported Pd aerogels. The performance of the catalysts obtained by means of microwave heating favored the formic acid electro-oxidation with HSO as the electrolyte.

Hybrid RF-Si Xerogels: A Cost-Effective Proposal for Insulator Materials.

Hybrid xerogels RF/Si were synthesized by controlling the chemical variables involved in the polymerization process (i.e., molar ratios, dilution ratio, catalysts, etc.

Ultralight-Weight Graphene Aerogels with Extremely High Electrical Conductivity.

The integration of 2D graphene sheets into a porous and macroscopic structure is extremely attractive for application in several electrochemical fields. In this regard, for the first time, the synthesis of 3D graphene aerogels is reported by using a rapid, easy, cost-effective, and scalable at industrial level methodology. These aerogels integrate the intrinsic properties of graphene with a high pore volume.

Graphitized Carbon Xerogels for Lithium-Ion Batteries.

Carbon xerogels with different macropore sizes and degrees of graphitization were evaluated as electrodes in lithium-ion batteries. It was found that pore structure of the xerogels has a marked effect on the degree of graphitization of the final carbons. Moreover, the incorporation of graphene oxide to the polymeric structure of the carbon xerogels also leads to a change in their carbonaceous structure and to a remarkable increase in the graphitic phase of the samples studied.

Load-dependent surface diffusion model for analyzing the kinetics of protein adsorption onto mesoporous materials.

The adsorption of cytochrome c in water onto organic and carbon xerogels with narrow pore size distributions has been studied by carrying out transient and equilibrium batch adsorption experiments. It was found that equilibrium adsorption exhibits a quasi-Langmuirian behavior (a g coefficient in the Redlich-Peterson isotherms of over 0.95) involving the formation of a monolayer of cyt c with a depth of ∼4nm on the surface of all xerogels for a packing density of the protein inside the pores of 0.

Syngas obtained by microwave pyrolysis of household wastes as feedstock for polyhydroxyalkanoate production in Rhodospirillum rubrum.

The massive production of urban and agricultural wastes has promoted a clear need for alternative processes of disposal and waste management. The potential use of municipal solid wastes (MSW) as feedstock for the production of polyhydroxyalkanoates (PHA) by a process known as syngas fermentation is considered herein as an attractive bio-economic strategy to reduce these wastes. In this work, we have evaluated the potential of Rhodospirillum rubrum as microbial cell factory for the synthesis of PHA from syngas produced by microwave pyrolysis of the MSW organic fraction from a European city (Seville).

Application of infiltrated LSCM-GDC oxide anode in direct carbon/coal fuel cells.

Hybrid direct carbon/coal fuel cells (HDCFCs) utilise an anode based upon a molten carbonate salt with an oxide conducting solid electrolyte for direct carbon/coal conversion. They can be fuelled by a wide range of carbon sources, and offer higher potential chemical to electrical energy conversion efficiency and have the potential to decrease CO2 emissions compared to coal-fired power plants. In this study, the application of (La, Sr)(Cr, Mn)O3 (LSCM) and (Gd, Ce)O2 (GDC) oxide anodes was explored in a HDCFC system running with two different carbon fuels, an organic xerogel and a raw bituminous coal.

Towards a feasible and scalable production of bio-xerogels.

Hypothesis: The synthesis process of carbon xerogels is limited, mainly due to two drawbacks that prevent their introduction onto the market: (i) the long time required for producing the material and (ii) the reagents used for the synthesis, which are costly and harmful to the environment. Microwave radiation is expected to produce a reduction in time of more than 90%, while the use of tannin instead of resorcinol will probably result in a cost-effective carbonaceous material.

Experiments: Resorcinol-tannin-formaldehyde xerogels containing different amounts of tannin, either with or without a surfactant (sodium dodecyl sulphate), were synthesized by means of two different heating methods: conventional and microwave heating.

CO₂ Separation and Capture Properties of Porous Carbonaceous Materials from Leather Residues.

Carbonaceous porous materials derived from leather skin residues have been found to have excellent CO₂ adsorption properties, with interestingly high gas selectivities for CO₂ (α > 200 at a gas composition of 15% CO₂/85% N₂, 273K, 1 bar) and capacities (>2 mmol·g at 273 K). Both CO₂ isotherms and the high heat of adsorption pointed to the presence of strong binding sites for CO₂ which may be correlated with both: N content in the leather residues and ultrasmall pore sizes.

Nitric oxide reduction in coal combustion: role of char surface complexes in heterogeneous reactions.

Nitrogen oxides are one of the major environmental problems arising from fossil fuel combustion. Coal char is relatively rich in nitrogen, and so this is an important source of nitrogen oxides during coal combustion. However, due to its carbonaceous nature, char can also reduce NO through heterogeneous reduction.