Efficient mapping of lignin depolymerization product pools and quantification of specific monomers through rapid GPC-HPLC-UV/VIS analysis.

Background: Growing research on lignin depolymerization to functionalized bio-aromatics has necessitated dedicated analysis techniques. However, immense variability in molecular weight and functional groups of the depolymerization products impedes fast analysis of a large number of samples while remaining in-depth enough for catalyst screening or reaction condition optimization. While GPC-HPLC-UV/VIS has been a promising technique, up until now, the information it provides is largely qualitative.

Comprehensive Model for the Synthesis of γ-AlO Microsphere-Supported Bimetallic Iron- and Copper Oxide Materials.

The effects of incipient wetness impregnation synthesis conditions on the macro- and microscopic properties of bimetallic iron oxide/copper oxide@γ-AlO microspheres were elucidated. The key steering factors for the macroscopic distribution of the metals throughout the support, and for the metal nanoparticle sizes, were the pH of the impregnation solution, the counterions present in the metal precursor, the amount of negatively charged groups on the alumina, the complexation of iron, the impregnation strategy (simultaneous or sequential) and, in the latter case, the order of impregnation. The interactions taking place during impregnation are identified as competitive adsorption of charged dissolved species (Fe/Cu cations, protons, and additional anions) in the impregnation solution.

Fast screening of Depolymerized Lignin Samples Through 2D-Liquid Chromatography Mapping.

Lignin valorization and particularly its depolymerization into bio-aromatics, has emerged as an important research topic within green chemistry. However, screening of catalysts and reaction conditions within this field is strongly constrained by the lack of analytical techniques that allow for fast and detailed mapping of the product pools. This analytical gap results from the inherent product pool complexity and the focus of the state-of-the-art on monomers and dimers, overlooking the larger oligomers.

Development of Lignin-Based Mesoporous Carbons for the Adsorption of Humic Acid.

There is an increasing urge to make the transition toward biobased materials. Lignin, originating from lignocellulosic biomass, can be potentially valorized as humic acid (HA) adsorbents lignin-based mesoporous carbon (MC). In this work, these materials were synthesized for the first time starting from modified lignin as the carbon precursor, using the soft-template methodology.

Oxygen-rich poly-bisvanillonitrile embedded amorphous zirconium oxide nanoparticles as reusable and porous adsorbent for removal of arsenic species from water.

A new oxygen-rich porous polymer based on bisvanillonitrile was synthesized and characterized. This polymer was employed as support for the anchoring of 14.5 w% amorphous zirconium oxide nanoparticles.

The novel method to reduce the silica content in lignin recovered from black liquor originating from rice straw.

Difficulties in the production of lignin from rice straw because of high silica content in the recovered lignin reduce its recovery yield and applications as bio-fuel and aromatic chemicals. Therefore, the objective of this study is to develop a novel method to reduce the silica content in lignin from rice straw more effectively and selectively. The method is established by monitoring the precipitation behavior as well as the chemical structure of precipitate by single-stage acidification at different pH values of black liquor collected from the alkaline treatment of rice straw.

Monometallic Cerium Layered Double Hydroxide Supported Pd-Ni Nanoparticles as High Performance Catalysts for Lignin Hydrogenolysis.

Monometallic cerium layered double hydroxides (Ce-LDH) supports were successfully synthesized by a homogeneous alkalization route driven by hexamethylenetetramine (HMT). The formation of the Ce-LDH was confirmed and its structural and compositional properties studied by XRD, SEM, XPS, iodometric analyses and TGA. HT-XRD, N-sorption and XRF analyses revealed that by increasing the calcination temperature from 200 to 800 °C, the Ce-LDH material transforms to ceria (CeO) in four distinct phases, i.

Microwave induced "egg yolk" structure in Cr/V-MIL-53.

Using a one pot microwave procedure, mixed-metal "egg yolk" MOFs are created, with a core of (Cr/V)-MIL-53 and a shell of Cr-MIL-53. In contrast, the solvothermal method produces homogeneous mixed-metal MOFs. The influence of Cr and V on the flexibility and breathing was studied via T-XRPD and CO adsorption measurements.

Tunable Large Pore Mesoporous Carbons for the Enhanced Adsorption of Humic Acid.

Tunable large pore soft templated mesoporous carbons (SMC) were obtained via the organic self-assembly of resorcinol/formaldehyde with the triblock copolymer F127 and by investigating the effect of carbon precursor to surfactant (p/s) ratio and carbonization temperature on the material characteristics. The p/s ratio and carbonization temperature were varied respectively from 0.83 to 0.

Processing of Syndiotactic Polystyrene to Microspheres for Part Manufacturing through Selective Laser Sintering.

Syndiotactic polystyrene pellets were processed into powder form using mechanical (ball milling, rotor milling) and physicochemical (spray drying) techniques with the intention of using it as feed material for selective laser sintering. New materials are an important component in broadening the application window for selective laser sintering but must meet strict requirements to be used. Particles obtained were characterized in size and shape using SEM imaging, analyzed by software, and compared to the product obtained by conventional ball milling.

Ni-Cu Hydrotalcite-Derived Mixed Oxides as Highly Selective and Stable Catalysts for the Synthesis of β-Branched Bioalcohols by the Guerbet Reaction.

A series of Ni-Cu hydrotalcite-derived mixed oxides have been synthesized and evaluated as heterogeneous catalysts for the dimerization of linear aliphatic alcohols to afford β-branched Guerbet alcohols. The use of the hydrotalcite-structured catalyst precursor highly favors the catalyst stability. This Cu/Ni catalyst has an enhanced reducibility of Ni species under reaction conditions, favoring the hydrogen transfer and hydrogenation capacity of the catalyst system.

Processing of Polysulfone to Free Flowing Powder by Mechanical Milling and Spray Drying Techniques for Use in Selective Laser Sintering.

Polysulfone (PSU) has been processed into powder form by ball milling, rotor milling, and spray drying technique in an attempt to produce new materials for Selective Laser Sintering purposes. Both rotor milling and spray drying were adept to make spherical particles that can be used for this aim. Processing PSU pellets by rotor milling in a three-step process resulted in particles of 51.

Tuning the Pore Geometry of Ordered Mesoporous Carbons for Enhanced Adsorption of Bisphenol-A.

Mesoporous carbons were synthesized via both soft and hard template methods and compared to a commercial powder activated carbon (PAC) for the adsorption ability of bisphenol-A (BPA) from an aqueous solution. The commercial PAC had a BET-surface of 1027 m²/g with fine pores of 3 nm and less. The hard templated carbon (CMK-3) material had an even higher BET-surface of 1420 m²/g with an average pore size of 4 nm.

Ordered mesoporous phenolic resins: highly versatile and ultra stable support materials.

Ordered mesoporous phenolic resins and carbons - an advanced class of ultra-stable mesoporous materials - offer potential applications in the field of catalysis, electrodes and adsorbents. This review gives an extensive overview of the main principles and the recent progress made in the synthesis of these innovative materials using the soft-template method. Furthermore, the versatility towards functionalization and the incorporation of hetero-atoms in the organic framework of the mesoporous resins and carbons are considered.