Transformative adaptation through nature-based solutions: a comparative case study analysis in China, Italy, and Germany.

Unlabelled: This paper explores how claims for transformative adaptation toward more equitable and sustainable societies can be assessed. We build on a theoretical framework describing transformative adaptation as it manifests across four core elements of the public-sector adaptation lifecycle: vision, planning, institutional frameworks, and interventions. For each element, we identify characteristics that can help track adaptation as transformative.

Introduction to the Special Series, "Incorporating Nature-based Solutions into the Built Environment".

Incorporating nature-based solutions (NBSs) into the built environment supports the ongoing sustainability challenge as emphasized in the United Nations' Sustainable Development Goals (SDGs) and has particular relevance for SDG Goal #11 (Sustainable cities and communities), which seeks greater efficiencies in urban planning and management practices that address aging infrastructure and ongoing air, water, and soil pollution. The short communications and research articles in this special series exemplify many of these aspects, highlighting the application of NBSs and showcasing the latest environmental research and policy solutions to support this. Nature-based solutions in the built environment aim to promote the understanding of the transdisciplinary nature of NBSs and enhance the global awareness of the value of NBSs by providing a diversity of solutions to illustrate the positive economic, social, and environmental benefits of NBSs in the built environment.

From landfills to landscapes-Nature-based solutions for water management taking into account legacy contamination.

Nature-based solutions (NBS) can be used in combination with the reopening of piped rivers to support area development. In certain cases, piped rivers can run through disused landfills. This presents a complicating factor because landfills provide the possibility for river water to be contaminated by waste.

Monitoring wastewater discharge from the oil and gas industry using passive sampling and Danio rerio bioassay as complimentary tools.

Produced water (PW) represents the largest volume waste stream in oil and gas production operations from most offshore platforms. PW is difficult to monitor as releases are rapidly diluted and concentrations can reach trace levels. The use of passive samplers can over come this.

Vertical profiles of sedimentary polycyclic aromatic hydrocarbons and black carbon in the Gulf of Gdańsk (Poland) and Oslofjord/Drammensfjord (Norway), and their relation to regional energy transitions.

The analysis of undisturbed sediment cores is a powerful tool for understanding spatial and temporal impacts of anthropogenic emissions from the energy and transport sectors at a regional scale. The spatial and vertical distribution of polycyclic aromatic hydrocarbons (PAHs) and black carbon (BC) were determined in 12 cores of recent (up to 20cm long) sediments from the Gulf of Gdańsk in Poland, and Oslofjord/Drammensfjord in Norway. The Σ12PAHs levels in individual sediment layers varied from 250 to 4500ng/g d.

Anthropogenic impact on marine ecosystem health: A comparative multi-proxy investigation of recent sediments in coastal waters.

Hazardous substances entering the sea, and ultimately deposited in bottom sediments, pose a growing threat to marine ecosystems. The present study characterized two coastal areas exposed to significant anthropogenic impact - Gulf of Gdańsk (Poland), and Oslofjord/Drammensfjord (Norway) - by conducting a multi-proxy investigation of recent sediments, and comparing the results in light of different available thresholds for selected contaminants. Sediment samples were analyzed for benzo(a)pyrene (B(a)P) and other polycyclic aromatic hydrocarbons (PAHs), nonylphenols (NPs), organotin compounds (OTs), toxic metals (Cd, Hg, Pb), as well as mutagenic, genotoxic and endocrine-disrupting activities (in CALUX bioassays).

Advancing the Use of Passive Sampling in Risk Assessment and Management of Sediments Contaminated with Hydrophobic Organic Chemicals: Results of an International Ex Situ Passive Sampling Interlaboratory Comparison.

This work presents the results of an international interlaboratory comparison on ex situ passive sampling in sediments. The main objectives were to map the state of the science in passively sampling sediments, identify sources of variability, provide recommendations and practical guidance for standardized passive sampling, and advance the use of passive sampling in regulatory decision making by increasing confidence in the use of the technique. The study was performed by a consortium of 11 laboratories and included experiments with 14 passive sampling formats on 3 sediments for 25 target chemicals (PAHs and PCBs).

Monitoring alkylphenols in water using the polar organic chemical integrative sampler (POCIS): Determining sampling rates via the extraction of PES membranes and Oasis beads.

Polar organic chemical integrative samplers (POCIS) have previously been used to monitor alkylphenol (AP) contamination in water and produced water. However, only the sorbent receiving phase of the POCIS (Oasis beads) is traditionally analyzed, thus limiting the use of POCIS for monitoring a range of APs with varying hydrophobicity. Here a "pharmaceutical" POCIS was calibrated in the laboratory using a static renewal setup for APs (from 2-ethylphenol to 4-n-nonylphenol) with varying hydrophobicity (log K between 2.

Toolset for assessment of natural recovery from legacy contaminated sediment: Case study of Pallanza Bay, Lake Maggiore, Italy.

The aim of this study was to develop a toolset that can be used by site managers to assess and monitor natural attenuation processes in sediments contaminated with legacy hydrophobic organic contaminants. The toolset is composed of sediment traps to measure quality and deposition rate of incoming sediment under different hydrodynamic conditions, sediment cores to show trends in sediment bed concentrations over time, and passive samplers attached to a porewater probe frame to assess the mobility of buried contaminants and possible contaminant flux from sediment. These three tools were used together for the first time to assess the mobility of dichlorodiphenyltrichloroethane (DDT) contaminants in sediment in Pallanza Bay, Lake Maggiore, Italy.

Monitoring chemical and biological recovery at a confined aquatic disposal site, Oslofjord, Norway.

The recovery of the confined aquatic disposal (CAD) facility located at Malmøykalven in Oslofjord, Norway, has been assessed using an array of field measurement techniques. These methods were used prior to the disposal of dredged sediments as well as during 3 annual postdisposal monitoring campaigns. Traditional sampling to assess chemical recovery indicates that an immediate reduction in total sediment concentrations and surface sediments can be characterized as having good quality.

The role of passive sampling in monitoring the environmental impacts of produced water discharges from the Norwegian oil and gas industry.

Stringent and periodic iteration of regulations related to the monitoring of chemical releases from the offshore oil and gas industry requires the use of ever changing, rapidly developing and technologically advancing techniques. Passive samplers play an important role in water column monitoring of produced water (PW) discharge to seawater under Norwegian regulation, where they are used to; i) measure aqueous concentrations of pollutants, ii) quantify the exposure of caged organisms and investigate PW dispersal, and iii) validate dispersal models. This article summarises current Norwegian water column monitoring practice and identifies research and methodological gaps for the use of passive samplers in monitoring.

State-of-the-lagoon reports as vehicles of cross-disciplinary integration.

An integrative approach across disciplines is needed for sustainable lagoon and estuary management as identified by integrated coastal zone management. The ARCH research project (Architecture and roadmap to manage multiple pressures on lagoons) has taken initial steps to overcome the boundaries between disciplines and focus on cross-disciplinary integration by addressing the driving forces, challenges, and problems at various case study sites. A model was developed as a boundary-spanning activity to produce joint knowledge and understanding.

Stakeholder involvement for management of the coastal zone.

The European Union (EU) has taken the lead to promote the management of coastal systems. Management strategies are implemented by the Water Framework Directive (WFD) and the Marine Strategy Framework Directive (MSFD), as well as the recent Maritime Spatial Planning (MSP) Directive. Most EU directives have a strong focus on public participation; however, a recent review found that the actual involvement of stakeholders was variable.

Assessment of marine ecosystem services indicators: Experiences and lessons learned from 14 European case studies.

This article shares the experiences, observations, and discussions that occurred during the completing of an ecosystem services (ES) indicator framework to be used at European Union (EU) and Member States' level. The experience base was drawn from 3 European research projects and 14 associated case study sites that include 13 transitional-water bodies (specifically 8 coastal lagoons, 4 riverine estuaries, and 1 fjord) and 1 coastal-water ecosystem. The ES pertinent to each case study site were identified along with indicators of these ES and data sources that could be used for mapping.

Passive sampling methods for contaminated sediments: state of the science for organic contaminants.

This manuscript surveys the literature on passive sampler methods (PSMs) used in contaminated sediments to assess the chemical activity of organic contaminants. The chemical activity in turn dictates the reactivity and bioavailability of contaminants in sediment. Approaches to measure specific binding of compounds to sediment components, for example, amorphous carbon or specific types of reduced carbon, and the associated partition coefficients are difficult to determine, particularly for native sediment.

Large-scale field study on thin-layer capping of marine PCDD/F-contaminated sediments in Grenlandfjords, Norway: physicochemical effects.

A large-scale field experiment on in situ thin-layer capping was carried out in the polychlorinated dibenzodioxin and dibenzofuran (PCDD/F) contaminated Grenlandsfjords, Norway. The main focus of the trial was to test the effectiveness of active caps (targeted thickness of 2.5 cm) consisting of powdered activated carbon (AC) mixed into locally dredged clean clay.

Sorption of organic compounds to fresh and field-aged activated carbons in soils and sediments.

Activated carbon (AC) amendment to polluted sediment or soil is an emerging in situ treatment technique that reduces freely dissolved porewater concentrations and subsequently reduces the ecological and human health risk of hydrophobic organic compounds (HOCs). An important question is the capacity of the amended AC after prolonged exposure in the field. To address this issue, sorption of freshly spiked and native HOCs to AC aged under natural field conditions and fresh AC amendments was compared for one soil and two sediments.

Remediation of contaminated marine sediment using thin-layer capping with activated carbon--a field experiment in Trondheim harbor, Norway.

In situ amendment of contaminated sediments using activated carbon (AC) is a recent remediation technique, where the strong sorption of contaminants to added AC reduces their release from sediments and uptake into organisms. The current study describes a marine underwater field pilot study in Trondheim harbor, Norway, in which powdered AC alone or in combination with sand or clay was tested as a thin-layer capping material for polycyclic aromatic hydrocarbon (PAH)-contaminated sediment. Several novel elements were included, such as measuring PAH fluxes, no active mixing of AC into the sediment, and the testing of new manners of placing a thin AC cap on sediment, such as AC+clay and AC+sand combinations.

In situ measurement of PCB pore water concentration profiles in activated carbon-amended sediment using passive samplers.

Vertical pore water profiles of in situ PCBs were determined in a contaminated mudflat in San Francisco Bay, CA, 30 months after treatment using an activated carbon amendment in the upper layer of the sediment. Pore water concentrations were derived from concentrations of PCBs measured in two passive samplers; polyethylene (PE, 51 μm thick) and polyoxymethylene (POM, 17 μm thick) at different sediment depths. To calculate pore water concentrations from PCB contents in the passive samplers, an equilibrium approach and a first-order uptake model were applied, using five performance reference compounds to estimate pore water sampling rates.

Use of multicriteria involvement processes to enhance transparency and stakeholder participation at Bergen Harbor, Norway.

Use of participatory stakeholder engagement processes could be important to reduce the risk of potential conflicts in managing contaminated sites. Most stakeholder engagement techniques are qualitative in nature and require experienced facilitators. This study proposes a multicriteria involvement process to enhance transparency and stakeholder participation and applies it to a contaminated sediment management case study for Bergen Harbor, Norway.

Influence of historical industrial epochs on pore water and partitioning profiles of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in Oslo Harbor, Norway, sediment cores.

Contaminant levels in urban harbor sediments vary with contaminant emission levels, sedimentation rates, and sediment resuspension processes such as propeller wash. Levels of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) are decreasing in many urban harbors, as heavily contaminated sediments that accumulated during past decades are being buried by less-contaminated sediments. However, PAHs and PCBs remain a concern in areas where burial is slow or resuspension processes re-expose heavily contaminated older layers.

Assessment of field-related influences on polychlorinated biphenyl exposures and sorbent amendment using polychaete bioassays and passive sampler measurements.

Field-related influences on polychlorinated biphenyl (PCB) exposure were evaluated by employing caged deposit-feeders, Neanthes arenaceodentata, along with polyoxymethylene (POM) samplers using parallel in situ and ex situ bioassays with homogenized untreated or activated carbon (AC) amended sediment. The AC amendment achieved a remedial efficiency in reducing bioaccumulation by 90% in the laboratory and by 44% in the field transplants. In situ measurements showed that PCB uptake by POM samplers was greater for POM placed in the surface sediment compared with the underlying AC amendment, suggesting that tidal exchange of surrounding material with similar PCB availability as untreated sediment was redeposited in the cages.

Bioaccumulation of native polycyclic aromatic hydrocarbons from sediment by a polychaete and a gastropod: freely dissolved concentrations and activated carbon amendment.

The present paper describes a study on the bioaccumulation of native polycyclic aromatic hydrocarbons (PAHs) from three harbors in Norway using the polychaete Nereis diversicolor and the gastropod Hinia reticulata. First, biota-sediment accumulation factors (BSAFs) were measured in laboratory bioassays using the original sediments. Median BSAFs were 0.