UNLEASH: Ultralow Nanocluster Loading of Pt via Electro-Acoustic Seasoning of Heterocatalysts.

The shift toward sustainable energy has fueled the development of advanced electrocatalysts to enable green fuel production and chemical synthesis. To date, no material outperforms Pt-group catalysts for key electrocatalytic reactions, necessitating advanced catalysts that minimize use of these rare and expensive constituents (i.e.

Piezo-to-piezo (P2P) conversion: simultaneous β-phase crystallization and poling of ultrathin, transparent and freestanding homopolymer PVDF films MHz-order nanoelectromechanical vibration.

An unconventional yet facile low-energy method for uniquely synthesizing neat poly(vinylidene fluoride) (PVDF) films for energy harvesting applications by utilizing nanoelectromechanical vibration through a 'piezo-to-piezo' (P2P) mechanism is reported. In this concept, the nanoelectromechanical energy from a piezoelectric substrate is directly coupled into another polarizable material (, PVDF) during its crystallization to produce an optically transparent micron-thick film that not only exhibits strong piezoelectricity, but is also freestanding-properties ideal for its use for energy harvesting, but which are difficult to achieve through conventional synthesis routes. We show, particularly through characterization, that the unprecedented acceleration associated with the nanoelectromechanical vibration in the form of surface reflected bulk waves (SRBWs) facilitates preferentially-oriented nucleation of the ferroelectric PVDF β-phase, while simultaneously aligning its dipoles to pole the material through the SRBW's intense native evanescent electric field .

The Acoustophotoelectric Effect: Efficient Phonon-Photon-Electron Coupling in Zero-Voltage-Biased 2D SnS for Broad-Band Photodetection.

Two-dimensional (2D) layered metal dichalcogenides constitute a promising class of materials for photodetector applications due to their excellent optoelectronic properties. The most common photodetectors, which work on the principle of photoconductive or photovoltaic effects, however, require either the application of external voltage biases or built-in electric fields, which makes it challenging to simultaneously achieve high responsivities across broad-band wavelength excitation─especially beyond the material's nominal band gap─while producing low dark currents. In this work, we report the discovery of an intricate phonon-photon-electron coupling─which we term the effect─in SnS that facilitates efficient photodetection through the application of 100 MHz order propagating surface acoustic waves (SAWs).

Acoustomicrofluidic Defect Engineering and Ligand Exchange in ZIF-8 Metal-Organic Frameworks.

A way through which the properties of metal-organic frameworks (MOFs) can be tuned is by engineering defects into the crystal structure. Given its intrinsic stability and rigidity, however, it is difficult to introduce defects into zeolitic imidazolate frameworks (ZIFs)-and ZIF-8, in particular-without compromising crystal integrity. In this work, it is shown that the acoustic radiation pressure as well as the hydrodynamic stresses arising from the oscillatory flow generated by coupling high frequency (MHz-order) hybrid surface and bulk acoustic waves into a suspension of ZIF-8 crystals in a liquid pressure transmitting medium is capable of driving permanent structural changes in their crystal lattice structure.

Recovery of oxidized two-dimensional MXenes through high frequency nanoscale electromechanical vibration.

MXenes hold immense potential given their superior electrical properties. The practical adoption of these promising materials is, however, severely constrained by their oxidative susceptibility, leading to significant performance deterioration and lifespan limitations. Attempts to preserve MXenes have been limited, and it has not been possible thus far to reverse the material's performance.

Acoustofection: High-Frequency Vibrational Membrane Permeabilization for Intracellular siRNA Delivery into Nonadherent Cells.

The internalization of therapeutic molecules into cells-a critical step in enabling a suite of autologous ex vivo gene and cell therapies-is highly regulated by the lipid barrier imposed by the cell membrane. Strategies to increase the efficiency of delivering these exogenous payloads into the cell, while maintaining the integrity of both the therapeutic molecules to be delivered as well as the host cells they are delivered to, are therefore required. This is especially the case for suspension cells that are particularly difficult to transfect.

Enhanced Antimicrobial Activity and Low Phytotoxicity of Acoustically Synthesized Large Aspect Ratio Cu-BTC Metal-Organic Frameworks with Exposed Metal Sites.

Metal-organic frameworks (MOFs) have recently been shown to be effective antimicrobial agents, particularly if they comprise pathogenicidal metal ions. Nevertheless, the accessibility of these active metal sites to the pathogen, and hence the MOFs' antimicrobial activity itself, is often poor since the metal nodes are usually embedded deep within its three-dimensional (3D) structure. We show that a unique copper-based (copper(II)-benzene-1,3,5-tricarboxylate) MOF, whose quasi-two-dimensional (quasi-2D) swordlike structure facilitates exposure of the metal ions along its surface, exhibits enhanced antimicrobial properties against three representative plant pathogens: a bacterium (), a fungus (), and a virus ( ringspot virus (ORSV)).

Acoustomicrofluidic Concentration and Signal Enhancement of Fluorescent Nanodiamond Sensors.

Diamond nitrogen-vacancy (NV) centers constitute a promising class of quantum nanosensors owing to the unique magneto-optic properties associated with their spin states. The large surface area and photostability of diamond nanoparticles, together with their relatively low synthesis costs, make them a suitable platform for the detection of biologically relevant quantities such as paramagnetic ions and molecules in solution. Nevertheless, their sensing performance in solution is often hampered by poor signal-to-noise ratios and long acquisition times due to distribution inhomogeneities throughout the analyte sample.

Acoustomicrofluidic Synthesis of Pristine Ultrathin TiCT MXene Nanosheets and Quantum Dots.

The conversion of layered transition metal carbides and/or nitrides (MXenes) into zero-dimensional structures with thicknesses and lateral dimensions of a few nanometers allows these recently discovered materials with exceptional electronic properties to exploit the additional benefits of quantum confinement, edge effects, and large surface area. Conventional methods for the conversion of MXene nanosheets and quantum dots, however, involve extreme conditions such as high temperatures and/or harsh chemicals that, among other disadvantages, lead to significant degradation of the material as a consequence of their oxidation. Herein, we show that the large surface acceleration-on the order of 10 million 's-produced by high-frequency (10 MHz) nanometer-order electromechanical vibrations on a chip-scale piezoelectric substrate is capable of efficiently nebulizing, and consequently dimensionally reducing, a suspension of multilayer TiCT (MXene) into predominantly monolayer nanosheets and quantum dots while, importantly, preserving the material from any appreciable oxidation.

Ultrafast, One-Step, Salt-Solution-Based Acoustic Synthesis of TiC MXene.

The current quest for two-dimensional transition metal carbides and nitrides (MXenes) has been to circumvent the slow, hazardous, and laborious multistep synthesis procedures associated with conventional chemical MAX phase exfoliation. Here, we demonstrate a one-step synthesis method with local TiAlC MAX to TiCT MXene conversion on the order of milliseconds, facilitated by proton production through solution dissociation under megahertz frequency acoustic excitation. These protons combined with fluorine ions from LiF to selectively etch the MAX phase into MXene, whose delamination is aided by the acoustic forcing.

Programmable Phototaxis of Metal-Phenolic Particle Microswimmers.

Light-driven directional motion is common in nature but remains a challenge for synthetic microparticles, particularly regarding collective motion on a macroscopic scale. Successfully engineering microparticles with light-driven collective motion could lead to breakthroughs in drug delivery, contaminant sensing, environmental remediation, and artificial life. Herein, metal-phenolic particle microswimmers capable of autonomously sensing and swimming toward an external light source are reported, with the speed regulated by the wavelength and intensity of illumination.

Acoustic cavitation at low gas pressures in PZT-based ultrasonic systems.

The generation of cavitation-free radicals through evanescent electric field and bulk-streaming was reported when micro-volumes of a liquid were subjected to 10 MHz surface acoustic waves (SAW) on a piezoelectric substrate [Rezk et al., J. Phys.

High Frequency Sonoprocessing: A New Field of Cavitation-Free Acoustic Materials Synthesis, Processing, and Manipulation.

Ultrasound constitutes a powerful means for materials processing. Similarly, a new field has emerged demonstrating the possibility for harnessing sound energy sources at considerably higher frequencies (10 MHz to 1 GHz) compared to conventional ultrasound (⩽3 MHz) for synthesizing and manipulating a variety of bulk, nanoscale, and biological materials. At these frequencies and the typical acoustic intensities employed, cavitation-which underpins most sonochemical or, more broadly, ultrasound-mediated processes-is largely absent, suggesting that altogether fundamentally different mechanisms are at play.

Submicron Particle and Cell Concentration in a Closed Chamber Surface Acoustic Wave Microcentrifuge.

Preconcentrating particulate and cellular matter for their isolation or detection is often a necessary and critical sample preparation or purification step in many lab-on-a-chip diagnostic devices. While surface acoustic wave (SAW) microcentrifugation has been demonstrated as a powerful means to drive efficient particle concentration, this has primarily been limited to micron dimension particles. When the particle size is around 1 μm or below, studies on SAW microcentrifugation to date have shown that particle ring-like aggregates can only be obtained in contrast to the localized concentrated clusters that are obtained with larger particles.

Free Radical Generation from High-Frequency Electromechanical Dissociation of Pure Water.

We reveal a unique mechanism by which pure water can be dissociated to form free radicals without requiring catalysts, electrolytes, or electrode contact by means of high-frequency nanometer-amplitude electromechanical surface vibrations in the form of surface acoustic waves (SAWs) generated on a piezoelectric substrate. The physical undulations associated with these mechanical waves, in concert with the evanescent electric field arising from the piezoelectric coupling, constitute half-wavelength "nanoelectrochemical cells" in which liquid is trapped within the SAW potential minima with vertical dimensions defined by the wave amplitude (∼10 nm), thereby forming highly confined polarized regions with intense electric field strengths that enable the breakdown of water. The ions and free radicals that are generated rapidly electromigrate under the high field intensity in addition to being convectively transported away from the cells by the bulk liquid recirculation generated by the acoustic excitation, thereby overcoming mass transport limitations that lead to ion recombination.

Ultrafast assembly of swordlike Cu(1,3,5-benzenetricarboxylate) metal-organic framework crystals with exposed active metal sites.

Owing to their large surface area and high uptake capacity, metal-organic frameworks (MOFs) have attracted considerable attention as potential materials for gas storage, energy conversion, and electrocatalysis. Various strategies have recently been proposed to manipulate the MOF surface chemistry to facilitate exposure of the embedded metal centers at the crystal surface to allow more effective binding of target molecules to these active sites. Nevertheless, such strategies remain complex, often requiring strict control over the synthesis conditions to avoid blocking pore access, reduction in crystal quality, or even collapse of the entire crystal structure.

Fast three-dimensional micropatterning of PC12 cells in rapidly crosslinked hydrogel scaffolds using ultrasonic standing waves.

The ability to spatially organise the microenvironment of tissue scaffolds unlocks the potential of many scaffold-based tissue engineering applications. An example application is to aid the regeneration process of peripheral nerve injuries. Herein, we present a promising approach for three-dimensional (3D) micropatterning of nerve cells in tissue scaffolds for peripheral nerve repair.

On-Chip Generation of Vortical Flows for Microfluidic Centrifugation.

Microcentrifugation constitutes an important part of the microfluidic toolkit in a similar way that centrifugation is crucial to many macroscopic procedures, given that micromixing, sample preconcentration, particle separation, component fractionation, and cell agglomeration are essential operations in small scale processes. Yet, the dominance of capillary and viscous effects, which typically tend to retard flow, over inertial and gravitational forces, which are often useful for actuating flows and hence centrifugation, at microscopic scales makes it difficult to generate rotational flows at these dimensions, let alone with sufficient vorticity to support efficient mixing, separation, concentration, or aggregation. Herein, the various technologies-both passive and active-that have been developed to date for vortex generation in microfluidic devices are reviewed.

Rapid dry exfoliation method for tuneable production of molybdenum disulphide quantum dots and large micron-dimension sheets.

Despite advances in two-dimensional (2D) transition metal dichalcogenide research owing to their outstanding physical properties, the synthesis of large micron-dimension single-layer sheets of these materials remains a challenge. Here, we present a novel and unique method to rapidly and flexibly exfoliate bulk molybdenum disulphide (MoS2) into either small nanometre-dimension quantum dots (QDs) or large micron-dimension sheets comprising predominantly single- or few-layers. The exfoliation process is conducted in dry phase, i.

Acoustomicrofluidic assembly of oriented and simultaneously activated metal-organic frameworks.

The high surface area and porosity, and limitless compound and network combinations between the metal ions and organic ligands making up metal-organic frameworks (MOFs) offer tremendous opportunities for their use in many applications. While numerous methods have been proposed for the synthesis of MOF powders, it is often difficult to obtain oriented crystals with these techniques. Further, the need for additional post-synthesis steps to activate the crystals and release them from the substrate presents a considerable production challenge.

Miniaturised acoustofluidic tactile haptic actuator.

Tactile haptic feedback is an important consideration in the design of advanced human-machine interfaces, particularly in an age of increasing reliance on automation and artificial intelligence. In this work, we show that the typical nanometer-order surface displacement amplitudes of piezoelectric transducers-which are too small to be detectable by the human touch, and constitute a significant constraint in their use for tactile haptic surface actuation-can be circumvented by coupling the vibration into a liquid to drive the deflection of a thermoplastic membrane. In particular, transmission of the sound energy from the standing wave vibration generated along a piezoelectric transducer into a microfluidic chamber atop which the membrane is attached is observed to amplify the mechanical vibration signalling through both the acoustic radiation pressure and the viscous normal stress acting on the membrane-the latter arising due to the acoustic streaming generated as the sound wave propagates through the liquid-to produce 100 μm-order static deflections of the membrane, upon which approximately 0.

Acoustopipetting: Tunable Nanoliter Sample Dispensing Using Surface Acoustic Waves.

We seek to demonstrate a robust, low-cost, and user-friendly acoustomicrofluidic platform that facilitates rapid, reproducible, and precise nanoliter sample dispensing. The solid-state chipscale platform exploits the unprecedented acceleration arising from high-frequency nanoelectromechanical vibrations, on the order of 10 million g, to jet the sample and hence generate a liquid bridge that spans across the substrate, on which the vibrations are generated and from which the sample originates, to a top target plate before rapidly pinching off to deposit the sample on the target with precise and reproducible volumes that can be tuned down to 0.22 μL with a standard error of 6.

High frequency acoustic permeabilisation of drugs through tissue for localised mucosal delivery.

The majority of infectious diseases enter the body through mucosal membranes that line the ocular, nasal, oral, vaginal and rectal surfaces. As infections can be effectively prevented by instigating a local immune response in the immunocyte-rich regions of the mucosa, an efficacious route of vaccine administration is to directly target their delivery to these surfaces. It is nevertheless challenging to provide sufficient driving force to penetrate both the mucus lining as well as the epithelial barrier of the mucosal surfaces, which are designed to effectively keep foreign entities out, but not excessively such that the therapeutic agent penetrates deeper into the vascularised submucosal regions where they are mostly taken up by the systemic circulation, thus resulting in a far weaker immune response.

Acoustically-mediated intracellular delivery.

Recent breakthroughs in gene editing have necessitated practical ex vivo methods to rapidly and efficiently re-engineer patient-harvested cells. Many physical membrane-disruption or pore-forming techniques for intracellular delivery, however, result in poor cell viability, while most carrier-mediated techniques suffer from suboptimal endosomal escape and hence cytoplasmic or nuclear targeting. In this work, we show that short exposure of cells to high frequency (>10 MHz) acoustic excitation facilitates temporal reorganisation of the lipid structure in the cell membrane that enhances translocation of gold nanoparticles and therapeutic molecules into the cell within just ten minutes.

Correction: Continuous tuneable droplet ejection via pulsed surface acoustic wave jetting.

Correction for 'Continuous tuneable droplet ejection via pulsed surface acoustic wave jetting' by Jasmine O. Castro et al., Soft Matter, 2018, DOI: 10.