Understanding the Effect of Curvature on the Magnetization Reversal of Three-Dimensional Nanohelices.

Comprehending the interaction between geometry and magnetism in three-dimensional (3D) nanostructures is important to understand the fundamental physics of domain wall (DW) formation and pinning. Here, we use focused-electron-beam-induced deposition to fabricate magnetic nanohelices with increasing helical curvature with height. Using electron tomography and Lorentz transmission electron microscopy, we reconstruct the 3D structure and magnetization of the nanohelices.

Topological Spin Textures in an Insulating van der Waals Ferromagnet.

Generation and control of topological spin textures constitutes one of the most exciting challenges of modern spintronics given their potential applications in information storage technologies. Of particular interest are magnetic insulators, which due to low damping, absence of Joule heating and reduced dissipation can provide energy-efficient spin-textures platform. Here, it is demonstrated that the interplay between sample thickness, external magnetic fields, and optical excitations can generate a prolific paramount of spin textures, and their coexistence in insulating CrBr van der Waals (vdW) ferromagnets.

Writing and Detecting Topological Charges in Exfoliated FeGeTe.

FeGeTe is a promising two-dimensional (2D) van der Waals (vdW) magnet for practical applications, given its magnetic properties. These include Curie temperatures above room temperature, and topological spin textures─TST (both merons and skyrmions), responsible for a pronounced anomalous Hall effect (AHE) and its topological counterpart (THE), which can be harvested for spintronics. Here, we show that both the AHE and THE can be amplified considerably by just adjusting the thickness of exfoliated FeGeTe, with THE becoming observable even in zero magnetic field due to a field-induced unbalance in topological charges.

Direct observation of magnetic ordering induced systematic lattice disorder in artificial rhombus spin ices.

It is critical to understand the effect of lattice geometry on the order parameter of a condensed matter system, as it controls phase transitions in such systems. Artificial spin ices (ASIs) are two-dimensional lattices of Ising-like nanomagnets that provide an opportunity to explore such phenomena by lithographically controlling the lattice geometry to observe its influence on magnetic ordering and frustration effects. Here we report a systematic approach to studying the effects of disorder in rhombus ASIs generated from combinations of five vertex motifs.

Coexistence of Merons with Skyrmions in the Centrosymmetric Van Der Waals Ferromagnet Fe GeTe.

Fe GeTe is a centrosymmetric, layered van der Waals (vdW) ferromagnet that displays Curie temperatures T (270-330 K) that are within the useful range for spintronic applications. However, little is known about the interplay between its topological spin textures (e.g.

Thermal Hysteresis and Ordering Behavior of Magnetic Skyrmion Lattices.

The physics of phase transitions in two-dimensional (2D) systems underpins research in diverse fields including statistical mechanics, nanomagnetism, and soft condensed matter. However, many aspects of 2D phase transitions are still not well understood, including the effects of interparticle potential, polydispersity, and particle shape. Magnetic skyrmions are chiral spin-structure quasi-particles that form two-dimensional lattices.

The effect of annealing on optical transmittance and structure of ZLANI fluorozirconate glass thin films.

We report the effect of thermal annealing on structure, composition, optical transmittance and thickness of a novel fluorozirconate glass (ZLANI) containing Zr, La, Al, Na and In fluorides. In this work, pulsed laser deposition was used to grow thin films of ZLANI, and thermal annealing at different temperatures was performed on the films. Annealing did not change the composition, but a clear structural evolution of the ZLANI glass was observed by transmission electron microscopy (TEM), showing that we can control microstructure independent of composition.

Comparison of Metal Adhesion Layers for Au Films in Thermoplasmonic Applications.

If thermoplasmonic applications such as heat-assisted magnetic recording are to be commercially viable, it is necessary to optimize both thermal stability and plasmonic performance of the devices involved. In this work, a variety of different adhesion layers were investigated for their ability to reduce dewetting of sputtered 50 nm Au films on SiO substrates. Traditional adhesion layer metals Ti and Cr were compared with alternative materials of Al, Ta, and W.

Less is More: Improved Thermal Stability and Plasmonic Response in Au Films via the Use of SubNanometer Ti Adhesion Layers.

The use of a metallic adhesion layer is known to increase the thermo-mechanical stability of Au thin films against solid-state dewetting, but in turn results in damping of the plasmonic response, reducing their utility in applications such as heat-assisted magnetic recording (HAMR). In this work, 50 nm Au films with Ti adhesion layers ranging in thickness from 0 to 5 nm were fabricated, and their thermal stability, electrical resistivity, and plasmonic response were measured. Subnanometer adhesion layers are demonstrated to significantly increase the stability of the thin films against dewetting at elevated temperatures (>200 °C), compared to more commonly used adhesion layer thicknesses that are in the range of 2-5 nm.

Ferroelectric Domain Studies of Patterned (001) BiFeO by Angle-Resolved Piezoresponse Force Microscopy.

We have studied the ferroelectric domains in (001) BiFeO (BFO) films patterned into mesas with various aspect ratios, using angle-resolved piezoresponse force microscope (AR-PFM), which can image the in-plane polarization component with an angular resolution of 30°. We observed not only stable polarization variants, but also meta-stable polarization variants, which can reduce the charge accumulated at domain boundaries. We considered the number of neighboring domains that are in contact, in order to analyze the complexity of the ferroelectric domain structure.

Interface-Induced Phenomena in Magnetism.

This article reviews static and dynamic interfacial effects in magnetism, focusing on interfacially-driven magnetic effects and phenomena associated with spin-orbit coupling and intrinsic symmetry breaking at interfaces. It provides a historical background and literature survey, but focuses on recent progress, identifying the most exciting new scientific results and pointing to promising future research directions. It starts with an introduction and overview of how basic magnetic properties are affected by interfaces, then turns to a discussion of charge and spin transport through and near interfaces and how these can be used to control the properties of the magnetic layer.

Nanocrystallization in Fluorochlorozirconate Glass-Ceramics.

Heat treating fluorochlorozirconate (FCZ) glasses nucleates nanocrystals in the glass matrix, resulting in a nanocomposite glass-ceramic that has optical properties suitable for use as a medical imaging plate. Understanding the way in which the nanocrystal nucleation proceeds is critical to controlling the optical behavior. The nucleation and growth of nanocrystals in FCZ glass-ceramics was investigated with transmission electron microscopy heating experiments.

A method for directly correlating site-specific cross-sectional and plan-view transmission electron microscopy of individual nanostructures.

A sample preparation method is described for enabling direct correlation of site-specific plan-view and cross-sectional transmission electron microscopy (TEM) analysis of individual nanostructures by employing a dual-beam focused-ion beam (FIB) microscope. This technique is demonstrated using Si nanowires dispersed on a TEM sample support (lacey carbon or Si-nitride). Individual nanowires are first imaged in the plan-view orientation to identify a region of interest; in this case, impurity atoms distributed at crystalline defects that require further investigation in the cross-sectional orientation.

Atomic structural analysis of nanowire defects and polytypes enabled through cross-sectional lattice imaging.

Correlated transmission electron microscopy imaging, electron diffraction, and Raman spectroscopy are used to investigate the structure of Si nanowires with planar defects. In addition to plan-view imaging, individual defective nanowires are imaged in axial cross-section at specific locations selected in plan-view imaging. This correlated characterization approach enables definitive identification of complex defect structures that give rise to diffraction patterns that have been misinterpreted in the literature.

Catalyst incorporation at defects during nanowire growth.

Scanning and transmission electron microscopy was used to correlate the structure of planar defects with the prevalence of Au catalyst atom incorporation in Si nanowires. Site-specific high-resolution imaging along orthogonal zone axes, enabled by advances in focused ion beam cross sectioning, reveals substantial incorporation of catalyst atoms at grain boundaries in <110> oriented nanowires. In contrast, (111) stacking faults that generate new polytypes in <112> oriented nanowires do not show preferential catalyst incorporation.

Three-dimensional study of the vector potential of magnetic structures.

The vector potential is central to a number of areas of condensed matter physics, such as superconductivity and magnetism. We have used a combination of electron wave phase reconstruction and electron tomographic reconstruction to experimentally measure and visualize the three-dimensional vector potential in and around a magnetic Permalloy structure. The method can probe the vector potential of the patterned structures with a resolution of about 13 nm.

In situ TEM observation of magnetic materials.

Magnetic nanostructures and thin films display novel magnetization reversal behavior as a function of size and shape, which makes them appropriate for a range of technological applications. The spatial resolution of in situ transmission electron microscopy techniques such as Lorentz TEM (LTEM) and off-axis electron holography are well suited to analysis of the magnetic domain structure and magnetization behavior of these magnetic nanostructures and thin films. In this article the various techniques that are applicable are described, including the qualitative LTEM imaging modes and the differential phase contrast technique.