Feasibility of IR-MALDESI Mass Spectrometry Imaging of PFAS.

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are a class of emerging contaminants that have been in use industrially since the 1940s. Their long-term and extensive commercial use has led to their ubiquitous presence in the environment. The ability to measure the bioconcentration and distribution of PFAS in the tissue of aquatic organisms helps elucidate the persistence of PFAS as well as environmental impacts.

An Alternative Micro-Milling Fabrication Process for Rapid and Low-Cost Microfluidics.

Microfluidics is an important technology for the biomedical industry and is often utilised in our daily lives. Recent advances in micro-milling technology have allowed for rapid fabrication of smaller and more complex structures, at lower costs, making it a viable alternative to other fabrication methods. The microfluidic chip fabrication developed in this research is a step-by-step process with a self-contained wet milling chamber.

Process Development of a Macrocyclic Peptide Inhibitor of PD-L1.

This article outlines the process development leading to the manufacture of 800 g of BMS-986189, a macrocyclic peptide active pharmaceutical ingredient. Multiple N-methylated unnatural amino acids posed challenges to manufacturing due to the lability of the peptide to cleavage during global side chain deprotection and precipitation steps. These issues were exacerbated upon scale-up, resulting in severe yield loss and necessitating careful impurity identification, understanding the root cause of impurity formation, and process optimization to deliver a scalable synthesis.

Challenges with the Synthesis of a Macrocyclic Thioether Peptide: From Milligram to Multigram Using Solid Phase Peptide Synthesis (SPPS).

We describe an optimization and scale-up of the 45-membered macrocyclic thioether peptide BMS-986189 utilizing solid-phase peptide synthesis (SPPS). Improvements to linear peptide isolation, macrocyclization, and peptide purification were demonstrated to increase the throughput and purification of material on scale and enabled the synthesis and purification of >60 g of target peptide. Taken together, not only these improvements resulted in a 28-fold yield increase from the original SPPS approach, but also the generality of this newly developed SPPS purification sequence has found application in the synthesis and purification of other macrocyclic thioether peptides.

Looking Outside the Square: The Growth, Structure, and Resilient Two-Dimensional Surface Electron Gas of Square SnO Nanotubes.

Nanotechnology has delivered an amazing range of new materials such as nanowires, tubes, ribbons, belts, cages, flowers, and sheets. However, these are usually circular, cylindrical, or hexagonal in nature, while nanostructures with square geometries are comparatively rare. Here, a highly scalable method is reported for producing vertically aligned Sb-doped SnO nanotubes with perfectly-square geometries on Au nanoparticle covered m-plane sapphire using mist chemical vapor deposition.

Correlation between Objective Measures of Sun Exposure and Self-Reported Sun Protective Behavior and Attitudes in Predominantly Hispanic Youth.

Melanoma incidence is increasing, with poor prognosis cases growing faster in California Hispanics than in non-Hispanic whites. Ultraviolet Radiation (UVR) exposure as a child has been found to disproportionately increase the risk of melanoma. To determine correlates of UVR exposure in this high-risk population, we conducted a study in predominately Hispanic 4th and 5th grade classrooms in Los Angeles County, a high UVR environment, during the spring.

Respiratory support for patients with COVID-19: A national survey of respiratory departments in England.

Objective: We developed a national survey to assess the changes implemented by respiratory departments across England in response to the first wave of the COVID-19 pandemic.

Methods: An online survey was sent to the respiratory clinical leads in 132 NHS trusts in England. The survey was open between 10 August 2020 and 25 September 2020.

Diagnostics: a major priority for the NHS.

Diagnostic capacity in the NHS in England was much lower than that in many other developed countries before the COVID-19 pandemic. The relative lack of diagnostic equipment and workforce is now hampering recovery from the pandemic. In response to this, a major programme of work is now underway to improve access to a wide range of diagnostic tests.

COVID-19-related changes in outpatient CPAP setup pathways for OSA are linked with decreased 30-day CPAP usage.

The COVID-19 pandemic changed continuous positive airway pressure (CPAP) setup pathways. We evaluated patients commenced on CPAP in 2019 (prepandemic) and 2020 (post-first UK wave). Face-to-face (F2F) setup numbers, with CPAP turned on, decreased from 613 patients (98.

Identifying chemical and physical changes in wide-gap semiconductors using real-time and near ambient-pressure XPS.

Photoelectron spectroscopy is a powerful characterisation tool for semiconductor surfaces and interfaces, providing in principle a correlation between the electronic band structure and surface chemistry along with quantitative parameters such as the electron affinity, interface potential, band bending and band offsets. However, measurements are often limited to ultrahigh vacuum and only the top few atomic layers are probed. The technique is seldom applied as an probe of surface processing; information is usually provided before and after processing in a separate environment, leading to a reduction in reproducibility.

Effect of an interactive educational activity using handheld ultraviolet radiation dosimeters on sun protection knowledge among Australian primary school students.

Ultraviolet radiation (UV) is the main cause of skin cancer, and children are a priority group for reducing UV exposure. We evaluated whether an interactive educational activity using handheld dosimeters improved UV-related knowledge among primary (elementary) school students. We conducted an uncontrolled before-after study among 427 students in grades 3-6 (ages 8-12 years) at five schools in the Greater Sydney region, Australia.

Influenza virus genotype to phenotype predictions through machine learning: a systematic review.

Background: There is great interest in understanding the viral genomic predictors of phenotypic traits that allow influenza A viruses to adapt to or become more virulent in different hosts. Machine learning techniques have demonstrated promise in addressing this critical need for other pathogens because the underlying algorithms are especially well equipped to uncover complex patterns in large datasets and produce generalizable predictions for new data. As the body of research where these techniques are applied for influenza A virus phenotype prediction continues to grow, it is useful to consider the strengths and weaknesses of these approaches to understand what has prevented these models from seeing widespread use by surveillance laboratories and to identify gaps that are underexplored with this technology.

Impact of personal genomic risk information on melanoma prevention behaviors and psychological outcomes: a randomized controlled trial.

Purpose: We evaluated the impact of personal melanoma genomic risk information on sun-related behaviors and psychological outcomes.

Methods: In this parallel group, open, randomized controlled trial, 1,025 Australians of European ancestry without melanoma and aged 18-69 years were recruited via the Medicare database (3% consent). Participants were randomized to the intervention (n = 513; saliva sample for genetic testing, personalized melanoma risk booklet based on a 40-variant polygenic risk score, telephone-based genetic counseling, educational booklet) or control (n = 512; educational booklet).

Electroreduction of Aryldiazonium Ion at the Polar and Non-Polar Faces of ZnO: Characterisation of the Grafted Films and Their Influence on Near-Surface Band Bending.

ZnO is a strong candidate for transparent electronic devices due to its wide band gap and earth-abundance, yet its practical use is limited by its surface metallicity arising from a surface electron accumulation layer (SEAL). The SEAL forms by hydroxylation of the surface under normal atmospheric conditions, and is present at all crystal faces of ZnO, although with differing hydroxyl structures. Multilayer aryl films grafted from aryldiazonium salts have previously been shown to decrease the downward bending at O-polar ZnO thin films, with Zn-O-C bonds anchoring the aryl films to the substrate.

Variability in COVID-19 in-hospital mortality rates between national health service trusts and regions in England: A national observational study for the Getting It Right First Time Programme.

Background: A key first step in optimising COVID-19 patient outcomes during future case-surges is to learn from the experience within individual hospitals during the early stages of the pandemic. The aim of this study was to investigate the extent of variation in COVID-19 outcomes between National Health Service (NHS) hospital trusts and regions in England using data from March-July 2020.

Methods: This was a retrospective observational study using the Hospital Episode Statistics administrative dataset.

Predictors of 30-day readmission following hospitalisation with community-acquired pneumonia.

Background: There is a paucity of UK data to aid healthcare professionals in predicting which patients hospitalised with community-acquired pneumonia (CAP) are at greatest risk of 30-day readmission and to determine which readmissions may occur soonest.

Methods: An analysis of CAP cases admitted to nine UK hospitals participating in the Advancing Quality Pneumonia Programme.

Results: An analysis was performed of 12 157 subjects hospitalised with CAP in the Advancing Quality Programme Database.

CHOK1SV GS-KO SSI expression system: A combination of the Fer1L4 locus and glutamine synthetase selection.

There are an ever-increasing number of biopharmaceutical candidates in clinical trials fueling an urgent need to streamline the cell line development process. A critical part of the process is the methodology used to generate and screen candidate cell lines compatible with GMP manufacturing processes. The relatively large amount of clone phenotypic variation observed from conventional "random integration" (RI)-based cell line construction is thought to be the result of a combination of the position variegation effect, genome plasticity and clonal variation.

A Comparison of Solar Ultraviolet Radiation Exposure in Urban Canyons in Venice, Italy and Johannesburg, South Africa.

Urban environments can have high-risk spaces that can provide excess personal sun exposure, such as urban or street canyons, and the spaces between buildings, among others. In these urban spaces, sun exposure can be high or low depending on several factors. Polysulphone film (PSF) was used to assess possible daily solar ultraviolet radiation (UVR) exposure in urban canyons in Venice, Italy and, for the first time in Africa, in Johannesburg, South Africa.

Characterization of personal solar ultraviolet radiation exposure using detrended fluctuation analysis.

Studies of personal solar ultraviolet radiation (pUVR) exposure are important to identify populations at-risk of excess and insufficient exposure given the negative and positive health impacts, respectively, of time spent in the sun. Electronic UVR dosimeters measure personal solar UVR exposure at high frequency intervals generating large datasets. Sophisticated methods are needed to analyze these data.

Control of Antibody Impurities Induced by Riboflavin in Culture Media During Production.

During the manufacturing of protein biologics, product variability during cell culture production and harvest needs to be actively controlled and monitored to maintain acceptable product quality. To a large degree, variants that have previously been described are covalent in nature and are easily analyzed by a variety of techniques. Here, we describe a noncovalent post translational modification of recombinantly expressed antibodies, containing variable domain tryptophans, that are exposed to culture media components and ambient laboratory light.

Non-typeable Haemophilus influenzae protein vaccine in adults with COPD: A phase 2 clinical trial.

Loss of airway microbial diversity is associated with non-typeable Haemophilus influenzae (NTHi) infection and increased risk of exacerbation in chronic obstructive pulmonary disease (COPD). We assessed the safety and immunogenicity of an investigational vaccine containing NTHi antigens, recombinant protein D (PD) and combined protein E and Pilin A (PE-PilA), and AS01 adjuvant in adults with moderate/severe COPD and prior exacerbations. In this phase 2, observer-blind, controlled trial (NCT02075541), 145 COPD patients aged 40-80 years randomly (1:1) received two doses of NTHi vaccine or placebo 60 days apart, on top of standard care.

The effect of covalently bonded aryl layers on the band bending and electron density of SnO surfaces probed by synchrotron X-ray photoelectron spectroscopy.

Tin(iv) dioxide (SnO) is a technologically important transparent conducting oxide with high chemical stability. In air, the SnO surface is terminated with hydroxyl groups which cause the electronic bands to bend downward at the surface capturing a two-dimensional surface electron accumulation layer (SEAL). The SEAL promotes adsorption at the surface, giving environmentally-sensitive electronic properties; this sensitivity is a barrier to some potential applications of the material.

Native Point Defect Measurement and Manipulation in ZnO Nanostructures.

This review presents recent research advances in measuring native point defects in ZnO nanostructures, establishing how these defects affect nanoscale electronic properties, and developing new techniques to manipulate these defects to control nano- and micro- wire electronic properties. From spatially-resolved cathodoluminescence spectroscopy, we now know that electrically-active native point defects are present inside, as well as at the surfaces of, ZnO and other semiconductor nanostructures. These defects within nanowires and at their metal interfaces can dominate electrical contact properties, yet they are sensitive to manipulation by chemical interactions, energy beams, as well as applied electrical fields.