Fatigue Performance of 3D-Printed Poly-Lactic-Acid Bone Scaffolds with Triply Periodic Minimal Surface and Voronoi Pore Structures.

Bone scaffolds serve a crucial role in tissue engineering, particularly in facilitating bone regeneration where natural repair is insufficient. Despite advancements in the fabrication of polymeric bone scaffolds, the challenge remains to optimize their mechanical resilience. Specifically, research on the fatigue behaviour of polymeric bone scaffolds is scarce.

A novel integration of regret-based methodology and bankruptcy theory for waste load allocation.

Developing a suitable index for Waste Load Allocation (WLA) is essential for both industrial polluters and environmental organizations. Identifying the index that best describes the quality conditions of the river is the main concern of this study. To achieve this purpose, a novel framework incorporating a regret-based index and a bankruptcy-based approach to address the impacts of low water quality and pollutant locations within the WLA are introduced.

Fatigue behaviour of load-bearing polymeric bone scaffolds: A review.

Bone scaffolds play a crucial role in bone tissue engineering by providing mechanical support for the growth of new tissue while enduring static and fatigue loads. Although polymers possess favourable characteristics such as adjustable degradation rate, tissue-compatible stiffness, ease of fabrication, and low toxicity, their relatively low mechanical strength has limited their use in load-bearing applications. While numerous studies have focused on assessing the static strength of polymeric scaffolds, little research has been conducted on their fatigue properties.

A new fuzzy approach and bankruptcy theory in risk estimation in Waste Load Allocation.

In this paper, we developed a simulator-optimizer model based on risk analysis to determine Waste Load Allocation (WLA). A new Fuzzy index as Fuzzy Risk Index (FRI) was linked with multi-objective optimization to minimize FRI for the environmental stakeholder and the total cost of sewage treatment for the polluting industries as the other collective stakeholder. Afterwards, the conflict was resolved with the help of Nash bargaining and bankruptcy approach (Constrained Equal Awards Rule).

Computational modeling of nickel-titanium orthopedic staples in the treatment of a fractured scaphoid: Effects of staple bridge configuration.

Internal fixation devices made of nickel-titanium (NiTi) staples have the advantage of producing compressive stress at the fracture site due to their unique shape memory effect and superelasticity. In the present study, a comparison was made between two commercial NiTi staples of the same size but with different bridge configurations, used for scaphoid fracture fixation. The staple and scaphoid anatomical configurations were modeled using SolidWorks, while ABAQUS software was used to analyze the stress and displacement caused by staples and distributed in the scaphoid waist.

Decoration of polylactic acid on graphene oxide for efficient adsorption of methylene blue and tetracycline.

Decorating nanomaterials on graphene oxide (GO) can enhance its adsorption capacity and removal efficiency of water pollutants. In this study, for the first time, nano-sized polylactic acid (PLA) has been successfully decorated on the surface of GO through a facile synthesis approach. The adsorptive efficiency of GO-PLA for removing methylene blue (MB) and tetracycline (TC) from an aqueous solution was examined.

Surface Heparinization of a Magnesium-Based Alloy: A Comparison Study of Aminopropyltriethoxysilane (APTES) and Polyamidoamine (PAMAM) Dendrimers.

Magnesium (Mg)-based alloys are biodegradable metallic biomaterials that show promise in minimizing the risks of permanent metallic implants. However, their clinical applications are restricted due to their rapid in vivo degradation and low surface hemocompatibilities. Surface modifications are critically important for controlling the corrosion rates of Mg-based alloys and improving their hemocompatibilities.

Multimodal effects of asymmetric coating of coronary stents by electrospinning and electrophoretic deposition.

Drug-eluting stents (DESs) are drug-coated vascular implants that inhibit smooth muscle cell proliferation and limit in-stent re-stenosis. However, traditional DESs release a single drug into the blood and cannot cope with complex mechanisms in atherosclerosis and body responses. The present study aimed to develop a novel multimodal stent by fabricating asymmetric coating with electrophoretic deposition and electrospinning.

Sugar molasses as a sustainable precursor for the synthesis of graphene sand composite adsorbent for tetracycline and methylene blue removal.

Sugar molasses from agricultural waste could be a sustainable carbon source for the synthesis of graphene adsorbent introduced in this work. The sugar molasses was successfully converted to graphene-like material and subsequently coated on the sand as graphene sand composite (GSC), as proven by XRD, XPS, Raman spectroscopy, and SEM with EDX mapping analyses. The adsorption performance of GSC was evaluated against the removal of Tetracycline (TC) and methylene blue (MB) pollutants from an aqueous solution in a fixed bed column continuous-flow adsorption setup.

Induction of Resistance Against (L.) (Lep.: Plutellidae) by Jasmonic Acid and Mealy Cabbage Aphid Feeding in L.

The diamondback moth, (L.), has become the most destructive insect pest of cruciferous plants, such as throughout the world including Iran. In this study, the induction of resistance was activated in oilseed rape plants ( L.

Evaluation of numerical schemes for capturing shock waves in modeling proppant transport in fractures.

In petroleum engineering, the transport phenomenon of proppants in a fracture caused by hydraulic fracturing is captured by hyperbolic partial differential equations (PDEs). The solution of this kind of PDEs may encounter smooth transitions, or there can be large gradients of the field variables. The numerical challenge posed in a shock situation is that high-order finite difference schemes lead to significant oscillations in the vicinity of shocks despite that such schemes result in higher accuracy in smooth regions.

Functionally graded porous scaffolds made of Ti-based agglomerates.

Mono- and double-layer porous scaffolds were successfully fabricated using ball-milled agglomerates of Ti and Ti-10Nb-3Mo alloy. For selectively controlling the level of porosity and pore size, the agglomerates were sieved into two different size fractions of 100-300μm and 300-500μm. Compressive mechanical properties were measured on a series of cylindrical sintered compacts with different ratios of solid core diameter to porous layer width.

Cell biological responses of osteoblasts on anodized nanotubular surface of a titanium-zirconium alloy.

Anodization of titanium and its alloys, under controlled conditions, generates a nanotubular architecture on the material surface. The biological consequences of such changes are poorly understood, and therefore, we have analyzed the cellular and molecular responses of osteoblasts that were plated on nanotubular anodized surface of a titanium-zirconium (TiZr) alloy. Upon comparing these results with those obtained on acid etched and polished surfaces of the same alloy, we observed a significant increase in adhesion and proliferation of cells on anodized surfaces as compared to acid etched or polished surface.

Insight into the role of N,N-dimethylaminoethyl methacrylate (DMAEMA) conjugation onto poly(ethylenimine): cell viability and gene transfection studies.

In the present study, the effect of N,N-dimethylaminoethyl methacrylate (DMAEMA) conjugation onto branched poly(ethylenimine) (PEI) with different grafting degree was examined for gene delivery applications. The DMAEMA-grafted-PEI conjugates were characterized and complexed with plasmid DNA (pDNA) at various concentrations, and the physicochemical properties, cell viability, and in vitro transfection efficiency of the complexes were evaluated in HEK 293T cells. Computational techniques were used to analyze the interaction energies and possible binding modes between DNA and conjugates at different grafting degrees.

Gene delivery using biodegradable polyelectrolyte microcapsules prepared through the layer-by-layer technique.

Biodegradable and non-biodegradable microcapsules were prepared via the layer-by-layer (LbL) technique consisting of the polyelectrolyte pairs of dextran sulphate/poly-L-arginine and poly(styrene sulfonate)/poly(allylamine hydrochloride), respectively, in an attempt to encapsulate plasmid DNA (pDNA) for efficient transfection into NIH 3T3 cells. Results indicated the retention of bioactivity in the encased pDNA, as well as a correlation between the level of in vitro gene expression and biodegradability properties of polyelectrolyte. Furthermore, the incorporation of iron oxide nanoparticles within the polyelectrolyte layers significantly improved the in vitro transfection efficiency of the microcapsules.

Calcium phosphate-mediated gene delivery using simulated body fluid (SBF).

The present study aimed at developing a new approach in gene delivery of calcium phosphate nanoparticles through simulated body fluid (CaP-SBF). The physicochemical and biological characteristics of the CaP-SBF nanoparticles were compared with those made in pure water (CaP-water) via a similar procedure. The CaP-SBF and CaP-water solutions were then adjusted to two different pH values of 7.

Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid.

Some of the critical properties for a successful orthopedic or dental implant material are its biocompatibility and bioactivity. Pure titanium (Ti) and zirconium (Zr) are widely accepted as biocompatible metals, due to their non-toxicity. While the bioactivity of Ti and some Ti alloys has been extensively investigated, there is still insufficient data for Zr and titanium-zirconium (TiZr) alloys.