Recent trends in core/shell nanoparticles: their enzyme-based electrochemical biosensor applications.

Improving novel and efficient biosensors for determining organic/inorganic compounds is a challenge in analytical chemistry for clinical diagnosis and research in biomedical sciences. Electrochemical enzyme-based biosensors are one of the commercially successful groups of biosensors that make them highly appealing because of their low cost, high selectivity, and sensitivity. Core/shell nanoparticles have emerged as versatile platforms for developing enzyme-based electrochemical biosensors due to their unique physicochemical properties and tunable surface characteristics.

Green catalyst for clean fuel production via hydrodeoxygenation.

The development of new fuel sources to replace nonrenewable fossil fuels has received substantial attention due to the ongoing demand for fossil fuels. Biomass and raw waste materials are crucial sources to produce suitable alternative fuels instead of nonrenewable fuels and offer a greener approach. Therefore, improving the fuel properties of biooils produced from the thermochemical conversion of biomass and raw waste materials is critical as it is used as an alternative to nonrenewable fuel.

Catalytic evaluation of cellulose pyrolysis by using nanosized metal oxide catalysts.

In this study, effects of TiO and ZnO nanometal oxides on cellulose pyrolysis have been investigated. Both catalysts have been synthesized via hydrothermal method and characterized by using different techniques. Catalytic and catalyst-free experiments were carried out so as to identify the catalytic abilities of synthesized nanoparticles.

SnO nanoparticles/waste masks carbon hybrid materials for DNA biosensor application on voltammetric detection of anti-cancer drug pazopanib.

This present study is the first investigation of pazopanib-dsDNA binding using bare and modified GCE. The interaction was mainly evaluated based on the decrease of voltammetric signal of deoxyadenosine by differential pulse voltammetry using three different ways, including the incubated solutions, dsDNA biosensor, and nanobiosensor. The nanobiosensor was fabricated with the help of SnO nanoparticles and carbon hybrid material.

Human hair rich in pyridinic nitrogen-base DNA biosensor for direct electrochemical monitoring of palbociclib-DNA interaction.

Carbon material derived from the waste-based biomass human hair (H), which is naturally rich in pyridinic nitrogen, provides a significant benefit in biosensor applications with its dominant conductivity character. The carbon material was synthesized from human hair waste by the hydrothermal carbonization (HTC) method, which is a promising green synthesis. A morphological characterization of the carbon materials was performed.

Catalytic pyrolysis of olive oil residue to produce synthesis gas: the effect of bulk and nano metal oxides.

In this study, olive oil residue (OR) biomass was pyrolyzed in the presence of bulk MgO (B-MgO), nano-MgO (N-MgO), bulk ZnO (B-ZnO)), and nano-ZnO (N- ZnO) metal oxides at different temperatures (400, 600, and 800 ºC). Significant results were obtained in terms of synthesis gas formation and CO reduction. The efficiency distribution of the products obtained as a result of the metal oxide-based pyrolysis process and the effects of metal oxides were examined in detail.

New analytical strategies Amplified with 2D carbon nanomaterials for electrochemical sensing of food pollutants in water and soils sources.

Pharmaceutical and food pollutants have threatened global health. Pharmacotherapy has left a positive impression in the field of health and life of people and animals. However, the many unresolved problems brought along with residues of pharmaceuticals in the environmental and food.

Recycled algae-based carbon materials as electroconductive 3D printed skeletal muscle tissue engineering scaffolds.

Skeletal muscle is an electrically and mechanically active tissue that contains highly oriented, densely packed myofibrils. The tissue has self-regeneration capacity upon injury, which is limited in the cases of volumetric muscle loss. Several regenerative therapies have been developed in order to enhance this capacity, as well as to structurally and mechanically support the defect site during regeneration.

In vitro cytotoxicity of hydrothermally synthesized ZnO nanoparticles on human periodontal ligament fibroblast and mouse dermal fibroblast cells.

The use of metal oxide nanoparticles (NPs) in industrial applications has been expanding, as a consequence, risk of human exposure increases. In this study, the potential toxic effects of zinc oxide (ZnO) NPs on human periodontal ligament fibroblast cells (hPDLFs) and on mouse dermal fibroblast cells (mDFs) were evaluated in vitro. We synthesized ZnO NPs (particle size; 7-8 nm) by the hydrothermal method.

Protein A immunosensor for the detection of immunoglobulin G by impedance spectroscopy.

A novel highly sensitive electrochemical impedimetric Protein A immunosensor for the determination of immunoglobulin G (IgG) was developed by immobilization of Protein A within a newly synthesized, and characterized polymer, poly(maleicanhydride-alt-decene-1). TiO2 nanoparticles (10-30 nm) were synthesized, characterized with X-ray diffraction, transmission electron microscopy and Brunauer-Emmett-Teller surface analysis. The electron transfer between IgG and the poly(maleicanhydride-alt-decene-1)-TiO2-Protein A is quasireversible with a formal potential of 225 mV vs Ag|AgCl.

A novel carboxymethylcellulose-gelatin-titanium dioxide-superoxide dismutase biosensor; electrochemical properties of carboxymethylcellulose-gelatin-titanium dioxide-superoxide dismutase.

A novel highly sensitive electrochemical carboxymethylcellulose-gelatin-TiO(2)-superoxide dismutase biosensor for the determination of O(2)(•-) was developed. The biosensor exhibits high analytical performance with a wide linear range (1.5 nM to 2 mM), low detection limit (1.

Detailed characterization of hydrothermally synthesized SnO2 nanoparticles.

3-4 nm of SnO2 nanoparticles having uniform spherical shape were successfully synthesized using a hydrothermal method. The hydrothermal method has many advantages over other methods of preparing nanoparticles (such as sol-gel, solid state, and chemical precipitation), because there is no need for calcination and milling steps. The particles were characterized by X-ray diffraction, pore size diamater analysis, transmission electron microscope, scanning electron microscope analysis, Raman spectroscopy, and thermogravimetric analysis/differential thermogravimetric analysis.

Preparation and characterization of zinc oxide nanoparticles and their sensor applications for electrochemical monitoring of nucleic acid hybridization.

In this study, ZnO nanoparticles (ZNP) of approximately 30 nm in size were synthesized by the hydrothermal method and characterized by X-ray diffraction (XRD), Braun-Emmet-Teller (BET) N2 adsorption analysis and transmission electron microscopy (TEM). ZnO nanoparticles enriched with poly(vinylferrocenium) (PVF+) modified single-use graphite electrodes were then developed for the electrochemical monitoring of nucleic acid hybridization related to the Hepatitis B Virus (HBV). Firstly, the surfaces of polymer modified and polymer-ZnO nanoparticle modified single-use pencil graphite electrodes (PGEs) were characterized using scanning electron microscopy (SEM).

Electrochemical behaviour of carbon paste electrodes enriched with tin oxide nanoparticles using voltammetry and electrochemical impedance spectroscopy.

The effect of the SnO(2) nanoparticles (SNPs) on the behaviour of voltammetric carbon paste electrodes were studied for possible use of this material in biosensor development. The electrochemical behaviour of SNP modified carbon paste electrodes (CPE) was first investigated by using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) techniques. The performance of the SNP modified electrodes were compared to those of unmodified ones and the parameters affecting the response of the modified electrode were optimized.

Investigation of photocatalytic effect of SnO2 nanoparticles synthesized by hydrothermal method on the decolorization of two organic dyes.

Tin oxide nanoparticles about 4 nm in size were successfully synthesized using hydrothermal method. The photocatalytic activity of the particles was determined by the decolorization of malachite green (MG) and titanium yellow (TY) under UV light. 12 ppm of MG and TY were used for the solution with an initial volume of 100 mL.

Tin oxide nanoparticles-polymer modified single-use sensors for electrochemical monitoring of label-free DNA hybridization.

In this study, SnO(2) nanoparticles (SNPs)-poly(vinylferrocenium) (PVF(+)) modified single-use graphite electrodes were developed for electrochemical monitoring of DNA hybridization. The surfaces of polymer modified and polymer-SNP modified pencil graphite electrodes (PGEs) were firstly characterized by using SEM analysis. The electrochemical behaviours of these electrodes were also investigated using the differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) techniques.

Production and characterization of pyrolytic oils by pyrolysis of waste machinery oil.

The main objective of this work is to propose an alternative method for evaluation of the waste machinery oil which is an environmental problem in Turkey. For this purpose, pyrolysis of waste machinery oil was conducted in a tubular reactor. Effect of the experimental conditions (various temperatures, catalyst type) on the formation of pyrolytic oil, gas, and char was investigated.