Compact and efficient O-band bismuth-doped phosphosilicate fiber amplifier for fiber-optic communications.

During last decades there has been considerable interest in developing a fiber amplifier for the 1.3-[Formula: see text]m spectral region that is comparable in performance to the Er-doped fiber amplifier operating near 1.55 [Formula: see text]m.

High-order mode suppression in double-clad optical fibers by adding absorbing inclusions.

We proposed and experimentally demonstrated a technique for the suppression of unwanted modes in double-clad fibers with a high core-to-clad diameter ratio by introducing high-index absorbing inclusions into the first cladding of the fibers. These inclusions disturb the shape of undesirable modes, and a noticeable part of the power becomes localized inside the inclusion, resulting in an increase in the propagation loss of these modes. Two fiber designs were studied and realized: one with cylindrical symmetry and an absorbing high-index ring as the inclusion and another with high-index absorbing rods inserted around the fiber core.

A 23-dB bismuth-doped optical fiber amplifier for a 1700-nm band.

It is now almost twenty-five years since the first Erbium-Doped Fiber Amplifier (EDFA) was demonstrated. Currently, the EDFA is one of the most important elements widely used in different kinds of fiber-optic communication systems. However, driven by a constantly increasing demand, the network traffic, growing exponentially over decades, will lead to the overload of these systems ("capacity crunch") because the operation of the EDFA is limited to a spectral region of 1530-1610 nm.

Luminescence and optical gain in Pb-doped silica-based optical fibers.

IR luminescence and optical gain in a Pb-doped fiber have been observed for the first time. Absorption, luminescence and pump on/pump off optical gain spectra, as well as luminescence decay time, have been measured in these fibers. Comparison of optical active center characteristics in Pb-doped and Bi-doped fibers of the same composition indicates an essential difference of optical active centers in these two types of fibers.

Bi-doped fiber lasers and amplifiers for a spectral region of 1300-1470 nm.

Bismuth-doped fiber lasers operating in the range 1300-1470 nm have been demonstrated for the first time, to our knowledge. It has been shown that Bi-doped alumina-free phosphogermanosilicate fibers reveal optical gain in a wavelength range of 1240-1485 nm with pumping at 1205, 1230, or 808 nm.