Functional Surfaces via Laser Processing in Nickel Acetate Solution.

This study presents a novel laser processing technique in a liquid media to enhance the surface mechanical properties of a material, by thermal impact and micro-alloying at the subsurface level. An aqueous solution of nickel acetate (15% wt.) was used as liquid media for laser processing of C45E steel.

Corrosion Behavior of Coated Low Carbon Steel in a Simulated PEMFC Environment.

Here, potential metallic bipolar plate (BP) materials were manufactured by laser coating NiCr-based alloys with different Ti additions on low carbon steel substrates. The titanium content within the coating varied between 1.5 and 12.

Modulated Laser Cladding of Implant-Type Coatings by Bovine-Bone-Derived Hydroxyapatite Powder Injection on Ti6Al4V Substrates-Part I: Fabrication and Physico-Chemical Characterization.

The surface physico-chemistry of metallic implants governs their successful long-term functionality for orthopedic and dentistry applications. Here, we investigated the feasibility of harmoniously combining two of the star materials currently employed in bone treatment/restoration, namely, calcium-phosphate-based bioceramics (in the form of coatings that have the capacity to enhance osseointegration) and titanium alloys (used as bulk implant materials due to their mechanical performance and lack of systemic toxicity). For the first time, bovine-bone-derived hydroxyapatite (BHA) was layered on top of Ti6Al4V substrates using powder injection laser cladding technology, and then subjected, in this first stage of the research, to an array of physical-chemical analyses.

Electrochemical Evaluation of Protective Coatings with Ti Additions on Mild Steel Substrate with Potential Application for PEM Fuel Cells.

In this work, the corrosion behavior of NiCr(Ti) protective coatings deposited on mild steel substrates through laser cladding technology is studied as an alternative new material for metallic bipolar plates used in PEMFC applications. For electrochemical testing, a solution consisting of 0.5 M HSO + 2 ppm F at room temperature is used as an electrolyte.

Morphological Analysis of Laser Surface Texturing Effect on AISI 430 Stainless Steel.

Laser surface texturing (LST) is a method to obtain micro-structures on the material's surface for improving tribological performances, wetting tuning, surface treatment, and increasing adhesion. The material selected for LST is AISI 430 ferritic stainless steel, distinguished by the low cost in manufacturing, corrosion resistance, and high strength at elevated temperature. The present study addresses the morphology of new pattern designs (crater array, ellipse, and octagonal shapes).

Wettability and Surface Roughness Analysis of Laser Surface Texturing of AISI 430 Stainless Steel.

Due to its wide applicability in industry, devising microstructures on the surface of materials can be easily implemented and automated in technological processes. Laser Surface Texturing (LST) is applied to modify the chemical composition, morphology, and roughness of surfaces (wettability), cleaning (remove contaminants), reducing internal stresses of metals (hardening, tempering), surface energy (polymers, metals), increasing the adhesion (hybrid joining, bioengineering) and decreasing the growth of pathogenic bacteria (bioengineering). This paper is a continuation and extension of our previous studies in laser-assisted texturing of surfaces.

Influence of the Laser Cladding Parameters on the Morphology, Wear and Corrosion Resistance of WC-Co/NiCrBSi Composite Coatings.

To enhance the sliding wear and corrosion behavior of steels with low carbon content, cermet composite coatings are usually deposited on their surface by various deposition processes. Laser cladding, compared to other deposition techniques such as electroplating, arc welding, and thermal spraying, has numerous advantages to produce such protective coatings. The paper presents the optimization of laser cladding deposition speed versus energy density in order to obtain WC-Co/NiCrBSi coatings with Ni-Al addition free of defects and reduced porosity deposited on low carbon steel substrate.

Diffusion and Controlled Release in Physically Crosslinked Poly (Vinyl Alcohol)/Iota-Carrageenan Hydrogel Blends.

This paper reports the obtaining of poly (vinyl alcohol) and i-carrageenan blend hydrogels by physical crosslinking (consecutive freeze-thaw cycles). The two polymers were completely miscible in the weight ratio interval used in this study, as determined by solution viscometry data. Strong interactions through hydrogen bonding and forming of mixed interpolymer crystalline domains were observed, which are responsible for the formation of stable drug release-tunable matrices.

Protein reactivity with singlet oxygen: Influence of the solvent exposure of the reactive amino acid residues.

The singlet oxygen quenching rate constants were measured for three model proteins, bovine serum albumin, β-lactoglobulin and lysozyme. The results were analyzed by comparing them with the corresponding singlet oxygen quenching rate constants for a series of tripeptides with the basic formula GlyAAGly where the central amino acid (AA) was the oxidizable amino acid, tryptophan, tyrosine, methionine and histidine. It was found that the reaction rate constant in proteins can be satisfactorily modelled by the sum of the individual contributions of the oxidizable AA residues corrected for the solvent accessible surface area (SASA) effects.

Effects and tolerability of betahistine in patients with vestibular vertigo: results from the Romanian contingent of the OSVaLD study.

Background And Methods: An efficacy population of 245 patients with vertigo of peripheral vestibular origin was recruited in Romania as part of a 3-month multinational, post-marketing surveillance study of open-label betahistine 48 mg/day (OSVaLD). Endpoints were changes in the Dizziness Handicap Index (primary endpoint), Medical Outcome Study Short-Form 36 (SF-36v2(®)), and the Hospital Anxiety and Depression Scale.

Results: During treatment, the total Dizziness Handicap Index score improved by 41 points (on a 100-point scale).

Characterization of mixtures of compounds produced in chlorpromazine aqueous solutions by ultraviolet laser irradiation: their applications in antimicrobial assays.

The study reports an investigation of the photoproducts obtained by exposure of chlorpromazine hydrochloride in ultrapure water (concentration 2 mg/mL) to a 266-nm laser beam obtained by fourth harmonic generation from a Nd:YAG laser (6-ns full time width at half maximum, 10-Hz pulse repetition rate). The photoproducts were analyzed by steady-state UV-Vis absorption, laser-induced fluorescence, Fourier transform infrared spectroscopy, and liquid chromatography-tandem time-of-flight mass spectroscopy. Two figures showing pathways that take place during irradiation for obtaining the final products are shown.

Development of the A§E test battery for assessment of pitch perception in speech.

Objectives: The auditory speech sounds evaluation 2009 test battery for assessment of speech pitch perception is presented. It was designed to (a) assess perception of pitch in linguistic contexts without the confounds of secondary acoustic cues, (b) be usable with listeners from different language backgrounds, and (c) be suitable for use in a clinical setting. The need for this test battery arises from increased awareness of the importance of prosody in clinical practice, and the development of methods for improving pitch perception in listeners with profound hearing losses.

Clinical assessment of pitch perception.

Objective: The perception of pitch has recently gained attention. At present, clinical audiologic tests to assess this are hardly available. This article reports on the development of a clinical test using harmonic intonation (HI) and disharmonic intonation (DI).

Direct modification of bioactive phenothiazines by exposure to laser radiation.

Whereas exposure of combinations of a phenothiazine and bacterium to incoherent UV increases the activity of the phenothiazine, exposure of the phenothiazine alone does not yield an increase of its activity. Because the laser beam energy is greater than that produced by the incoherent UV sources, exposure of phenothiazines to specific lasers may yield molecules with altered activities over that of the unexposed parent. Chlorpromazine, thioridazine and promethazine active against bacteria were exposed to two distinct lasers for varying periods of time.

Laser-induced autofluorescence measurements on brain tissues.

It was demonstrated that comparison of the autofluorescence spectra induced with laser radiation in ultraviolet and visible allows the identification of brain tumor tissues and normal tissues as well as the difference between them. The measurements were performed on homogenates to ensure an optimal reproducibility of the results. We conclude that the autofluorescence spectra of the tumor samples are close to those measured for normal tissues, but there are differences between them that allow distinguishing the tumor from the normal tissue.