A pilot system integrating a settling technique and a horizontal subsurface flow constructed wetland for the treatment of polluted lake water.

An integrated system was tested at pilot-scale for treating polluted water from the Marriot Lake in Egypt, comprising a settling technique followed by three parallel horizontal subsurface flow constructed wetland (HFCWs) units operating under a continuous flow mode; one HFCW unit was planted with Typha angustifolia and contained a perforated pipes network for enhanced passive aeration (CWA), one unit was planted without the perforated pipe network (CWR) and one served as a Control unit (unplanted and without perforated pipes). Changes in physicochemical parameters, BOD, nutrients (nitrogen, phosphorus), microbial community, and trace metals at different hydraulic retention times (HRT; 0.5-6 h) and hydraulic loading rates (HLR; 750, 1000, 1250, and 2000 L/m/d) were monitored.

Green Roofs Towards Circular and Resilient Cities.

Green roofs are gaining interest as nature-based solutions (NBS) to counteract with several environmental and socio-economic problems associated to urban sprawl and climate change. The challenge is to transform the built environment through the inclusion of NBS. Taking advantage of the existing space in the top of the buildings, the integration of green roofs will support the cities' transition towards circularity and resilience.

Hydraulic characterization and removal of metals and nutrients in an aerated horizontal subsurface flow "racetrack" wetland treating primary-treated oil industry effluent.

Constructed wetlands (CW) are an attractive technology due to their operational simplicity and low life-cycle cost. It has been applied for refinery effluent treatment but mostly single-stage designs (e.g.

Effect of design and operational parameters on nutrients and heavy metal removal in pilot floating treatment wetlands with Eichhornia Crassipes treating polluted lake water.

Though having an economic and ecological impact on Marriott Lake management in Egypt, water hyacinth (Eichhornia crassipes) is an aquatic floating macrophyte with a known phytoremediation potential. In order to assess its remediation potential, pilot floating treatment wetlands (FTWs) with E. crassipes were built in duplicates to evaluate the removal of nutrients and heavy metals from the polluted lake water.

Internalisation of spp. by and and implications for pathogen removal in Constructed Wetlands.

Freshwater contamination by enteric pathogens is implicated in the high frequency of diarrhoeal diseases in low to middle income countries, typically due to poor wastewater management. Constructed Wetlands are a cost-effective and sustainable alternative to conventional/mechanical treatment technologies, but the pathogen removal mechanisms in Constructed Wetlands are not fully understood. This study investigated for the first time the internalisation of spp.

Treatment of cork boiling wastewater using a horizontal subsurface flow constructed wetland combined with ozonation.

Cork boiling wastewaters (CBW) are strongly coloured complex aqueous solutions with high organic load of biorecalcitrant and toxic nature. The feasibility and efficiency of a CBW treatment process combining ozonation as pre- and post-treatment of a horizontal subsurface flow constructed wetland (HSFCW) was assessed. Over an extended monitoring period of 390 days, two lab-scale HSFCW units were tested; one planted with P.

A novel pilot and full-scale constructed wetland study for glass industry wastewater treatment.

Industrial wastewaters represent a serious threat to the environment due to their variable and complex composition. Though mostly mechanical systems are used for treatment of such wastewater, there is growing need for sustainable and cost-effective solutions, especially in low-income regions. In this study, a horizontal sub-surface flow Constructed Wetland (HSFCW) system was used for the first time to treat wastewater from a glass manufacturing industry in Iran.

Investigation of pilot-scale constructed wetlands treating simulated pre-treated tannery wastewater under tropical climate.

Tannery wastewater is characterized by high and variable concentrations of diverse pollutants, which makes it difficult and costly to treat. In the search for sustainable treatment options for tannery effluents, two pilot-scale horizontal subsurface flow (HSF) constructed wetlands (CW) were built and operated for the treatment of synthetic water of quality similar to that of pre-treated tannery effluents. Five different loading phases were examined with gradual increase of inflow COD, NH4+-N and Cr loads until reaching and exceeding the typical composition of a tannery effluent.

Investigation of lab-scale horizontal subsurface flow constructed wetlands treating industrial cork boiling wastewater.

The feasibility and treatment efficiency of horizontal subsurface flow constructed wetlands (HSFCW) was assessed for the first time for cork boiling wastewater (CBW) through laboratory experiments. CBW is known for its high content of phenolic compounds, complex composition of biorecalcitrant and toxic nature. Two lab-scale units, one planted with Phragmites australis (CWP) and one unplanted (CWC), were used to evaluate the removals of COD, BOD, total phenolic compounds (TPh) and decolourization over a 2.

Removal of dimethylphenols and ammonium in laboratory-scale horizontal subsurface flow constructed wetlands.

Phenolic compounds in industrial wastewaters are toxic pollutants and pose a threat to public health and ecosystems. More recently, focus is being directed toward combining the treatment of these compounds with a cost-effective and environmentally sound technology. The removal efficiency of dimethylphenol and ammonium nitrogen was studied, for the first time, in three different laboratory-scale horizontal subsurface flow constructed wetlands planted with .

A novel horizontal subsurface flow constructed wetland: Reducing area requirements and clogging risk.

The use of Constructed Wetlands (CWs) has been nowadays expanded from municipal to industrial and agro-industrial wastewaters. The main limitations of CWs remain the relatively high area requirements compared to mechanical treatment technologies and the potential occurrence of the clogging phenomenon. This study presents the findings of an innovative CW design where novel materials were used.

Heavy metal fate in pilot-scale sludge drying reed beds under various design and operation conditions.

Thirteen pilot-scale sludge drying reed bed (SDRB) units have been constructed and operated under various settings. The beds included a cobbles lower layer, where perforated PVC aeration tubes were placed, and two gravel layers on top. The setup included planted beds with common reeds and control units.

Stability and maturity of thickened wastewater sludge treated in pilot-scale sludge treatment wetlands.

Thickened wastewater activated sludge was treated in 13 pilot-scale sludge treatment wetlands of various configurations that operated continuously for three years in North Greece. Sludge was loaded for approximately 2.5 years, and the beds were left to rest for the remaining period.