Uniform wet-Spinning Mechanically Automated (USMA) fiber device.

Bioengineering techniques for producing fibers from biomaterials is a growing requirement in medical device technology research and development environments. Scale-up and control of diameter, shape, and length of fibrous proteins and elastomeric polymers are essential to produce defined and consistent materials for experimentation and clinical use. Here, we developed a novel wet spinning fiber extruder and spooler system engineered to draw precipitated fibers several meters in length across five spools.

A Salt-Templated Synthesis Method for Porous Platinum-based Macrobeams and Macrotubes.

The synthesis of high surface area porous noble metal nanomaterials generally relies on time consuming coalescence of pre-formed nanoparticles, followed by rinsing and supercritical drying steps, often resulting in mechanically fragile materials. Here, a method to synthesize nanostructured porous platinum-based macrotubes and macrobeams with a square cross section from insoluble salt needle templates is presented. The combination of oppositely charged platinum, palladium, and copper square planar ions results in the rapid formation of insoluble salt needles.

Synthesis Method for Cellulose Nanofiber Biotemplated Palladium Composite Aerogels.

Here, a method to synthesize cellulose nanofiber biotemplated palladium composite aerogels is presented. Noble metal aerogel synthesis methods often result in fragile aerogels with poor shape control. The use of carboxymethylated cellulose nanofibers (CNFs) to form a covalently bonded hydrogel allows for the reduction of metal ions such as palladium on the CNFs with control over both nanostructure and macroscopic aerogel monolith shape after supercritical drying.

Noble Metal Composite Porous Silk Fibroin Aerogel Fibers.

Nobel metal composite aerogel fibers made from flexible and porous biopolymers offer a wide range of applications, such as in catalysis and sensing, by functionalizing the nanostructure. However, producing these composite aerogels in a defined shape is challenging for many protein-based biopolymers, especially ones that are not fibrous proteins. Here, we present the synthesis of silk fibroin composite aerogel fibers up to 2 cm in length and a diameter of ~300 μm decorated with noble metal nanoparticles.

Progress in the development of olfactory-based bioelectronic chemosensors.

Artificial chemosensory devices have a wide range of applications in industry, security, and medicine. The development of these devices has been inspired by the speed, sensitivity, and selectivity by which the olfactory system in animals can probe the chemical nature of the environment. In this review, we examine how molecular and cellular components of natural olfactory systems have been incorporated into artificial chemosensors, or bioelectronic sensors.

Salt-Mediated Au-Cu Nanofoam and Au-Cu-Pd Porous Macrobeam Synthesis.

Multi-metallic and alloy nanomaterials enable a broad range of catalytic applications with high surface area and tuning reaction specificity through the variation of metal composition. The ability to synthesize these materials as three-dimensional nanostructures enables control of surface area, pore size and mass transfer properties, electronic conductivity, and ultimately device integration. Au-Cu nanomaterials offer tunable optical and catalytic properties at reduced material cost.

Cellulose Nanofiber Biotemplated Palladium Composite Aerogels.

Noble metal aerogels offer a wide range of catalytic applications due to their high surface area and tunable porosity. Control over monolith shape, pore size, and nanofiber diameter is desired in order to optimize electronic conductivity and mechanical integrity for device applications. However, common aerogel synthesis techniques such as solvent mediated aggregation, linker molecules, sol⁻gel, hydrothermal, and carbothermal reduction are limited when using noble metal salts.

Directed assembly of bio-inspired hierarchical materials with controlled nanofibrillar architectures.

In natural systems, directed self-assembly of structural proteins produces complex, hierarchical materials that exhibit a unique combination of mechanical, chemical and transport properties. This controlled process covers dimensions ranging from the nano- to the macroscale. Such materials are desirable to synthesize integrated and adaptive materials and systems.

Evaluation of Silk Inverse Opals for "Smart" Tissue Culture.

Visually tracking the subtle aspects of biological systems in real time during tissue culture remains challenging. Herein, we demonstrate the use of bioactive, cytocompatible, and biodegradable inverse opals from silk as a multifunctional substrate to transduce both the optical information and cells during tissue culture. We show that these substrates can visually track substrate degradation in various proteases during tissue digestion and protein deposition during the growth of mesenchymal stem cells.

Doxorubicin loaded nanodiamond-silk spheres for fluorescence tracking and controlled drug release.

Nanoparticle (NP) based technologies have proved to be considerably beneficial for advances in biomedicine especially in the areas of disease detection, drug delivery and bioimaging. Over the last few decades, NPs have garnered interest for their exemplary impacts on the detection, treatment, and prevention of cancer. The full potential of these technologies are yet to be employed for clinical use.

Fluorescent Nanodiamond Silk Fibroin Spheres: Advanced Nanoscale Bioimaging Tool.

High resolution bioimaging is not only critical to the study of cellular structures and processes but it also has important applications in drug delivery and therapeutics. Fluorescent nanodiamonds (NDs) are excellent candidates for long-term bioimaging and tracking of biological structures at the nanoscale. Encapsulating NDs in natural biopolymers like silk fibroin (SF) widens their biomedical applications.

Transparent, Nanostructured Silk Fibroin Hydrogels with Tunable Mechanical Properties.

Silk fibroin from the caterpillar has been processed into many material forms, with potential applications in areas ranging from optoelectronics to tissue engineering. As a hydrogel, silk fibroin has been engineered as a substrate for the regeneration of soft tissues where hydration and mechanical compatibility are necessary. Current fabrication of silk fibroin hydrogels produces microstructured materials that lack transparency and limits the ability to fully exploit the hydrogel form.

Highly tunable elastomeric silk biomaterials.

Elastomeric, fully degradable and biocompatible biomaterials are rare, with current options presenting significant limitations in terms of ease of functionalization and tunable mechanical and degradation properties. We report a new method for covalently crosslinking tyrosine residues in silk proteins, via horseradish peroxidase and hydrogen peroxide, to generate highly elastic hydrogels with tunable properties. The tunable mechanical properties, gelation kinetics and swelling properties of these new protein polymers, in addition to their ability to withstand shear strains on the order of 100%, compressive strains greater than 70% and display stiffness between 200 - 10,000 Pa, covering a significant portion of the properties of native soft tissues.

All-water-based electron-beam lithography using silk as a resist.

Traditional nanofabrication techniques often require complex lithographic steps and the use of toxic chemicals. To move from the laboratory scale to large scales, nanofabrication should be carried out using alternative procedures that are simple, inexpensive and use non-toxic solvents. Recent efforts have focused on nanoimprinting and the use of organic resists (such as quantum dot-polymer hybrids, DNA and poly(ethylene glycol)), which still require, for the most part, noxious chemicals for processing.

Synthesis of silk fibroin micro- and submicron spheres using a co-flow capillary device.

A custom-made co-flow capillary device is used to synthesize monodisperse silk fibroin micro- and submicron-spheres with diameters tunable over a wide range of sizes. A model drug release is examined and control of degradation kinetics is obtained by changing sphere diameter.

Silk protein based hybrid photonic-plasmonic crystal.

We propose a biocompatible hybrid photonic platform incorporating a 3D silk inverse opal (SIO) crystal and a 2D plasmonic crystal formed on the top surface of the SIO. This hybrid photonic-plasmonic crystal (HPPC) structure simultaneously exhibits both an extraordinary transmission and a pseudo-photonic band-gap in its transmission spectrum. We demonstrate the use of the HPPC as a refractive index (RI) sensor.