Induced electric conductivity in organic polymers.

Poly(diphenylene phthalide) (PDP) belongs to the class of carbocyclic organic electroactive polymers, which exhibits electric conductive properties when an external electric field and/or mechanical stress is applied. In this work, the transport properties of thin-film layered lead-PDP-lead structures were experimentally studied in a wide temperature range. At sufficiently high temperatures, the current voltage characteristics are satisfactorily described in terms of the injection model of currents limited by the space charge.

Polyribosomes of circular topology are prevalent in mammalian cells.

Polyribosomes, the groups of ribosomes simultaneously translating a single mRNA molecule, are very common in both, prokaryotic and eukaryotic cells. Even in early EM studies, polyribosomes have been shown to possess various spatial conformations, including a ring-shaped configuration which was considered to be functionally important. However, a recent in situ cryo-ET analysis of predominant regular inter-ribosome contacts did not confirm the abundance of ring-shaped polyribosomes in a cell cytoplasm.

Ni Nanoparticles Stabilized by Hyperbranched Polymer: Does the Architecture of the Polymer Affect the Nanoparticle Characteristics and Their Performance in Catalysis?

Heat-up and hot-injection methods were employed to synthesize Ni nanoparticles (NPs) with narrow size distribution in the presence of hyperbranched pyridylphenylene polymer (PPP) as a stabilizing agent. It was shown that depending on the synthetic method, Ni NPs were formed either in a cross-linked polymer network or stabilized by a soluble hyperbranched polymer. Ni NPs were characterized by a combination of transmission electron microscopy (TEM), scanning TEM, thermogravimetric analysis, powder X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray analysis, and magnetic measurements.

Assembling of Metal-Polymer Nanocomposites in Irradiated Solutions of 1-Vinyl-1,2,4-triazole and Au(III) Ions: Features of Polymerization and Nanoparticles Formation.

Gold nanoparticles (AuNPs) stabilized with poly(1-vinyl-1,2,4-triazole) (PVT) have been synthesized via a one-pot manner in irradiated solutions of 1-vinyl-1,2,4-triazole (VT) and Au(III) ions. The transmission electron microscopy examinations have shown that the sizes of nanoparticles formed range from 1 to 11 nm and are affected by the ratio of VT to gold ions. To study the kinetics peculiarities of the VT polymerization and assembling of AuNPs, UV-Vis spectroscopy was used.

The Performance of Nonwoven PLLA Scaffolds of Different Thickness for Stem Cells Seeding and Implantation.

The 3D reconstruction of 100 μm- and 600 μm-thick fibrous poly-L/L-lactide scaffolds was performed by confocal laser scanning microscopy and supported by scanning electron microscopy and showed that the density of the fibers on the side adjacent to the electrode is higher, which can affect cell diffusion, while the pore size is generally the same. Bone marrow mesenchymal stem cells cultured in a 600 μm-thick scaffold formed colonies and produced conditions for cell differentiation. An in vitro study of stem cells after 7 days revealed that cell proliferation and hepatocyte growth factor release in the 600 μm-thick scaffold were higher than in the 100 μm-thick scaffold.

Influence of low-voltage discharge energy on the morphology of carbon nanostructures in induced benzene transformation.

The directions of the transformation of benzene induced by low-voltage discharges at various energies of pulsed discharges were revealed. This paper shows the dependencies of the morphology and other characteristics of nanostructures obtained in the induced transformation of benzene on the energy of pulsed discharges. Nanostructures with different morphologies are formed when the energy of the low-voltage discharges changes during the induced transformation of benzene in the liquid phase.

Parylene-based memristive crossbar structures with multilevel resistive switching for neuromorphic computing.

Currently, there is growing interest in wearable and biocompatible smart computing and information processing systems that are safe for the human body. Memristive devices are promising for solving such problems due to a number of their attractive properties, such as low power consumption, scalability, and the multilevel nature of resistive switching (plasticity). The multilevel plasticity allows memristors to emulate synapses in hardware neuromorphic computing systems (NCSs).

Ru@hyperbranched Polymer for Hydrogenation of Levulinic Acid to Gamma-Valerolactone: The Role of the Catalyst Support.

Hydrogenation of levulinic acid (LA) obtained from cellulose biomass is a promising path for production of γ-valerolactone (GVL)-a component of biofuel. In this work, we developed Ru nanoparticle containing nanocomposites based on hyperbranched pyridylphenylene polymer, serving as multiligand and stabilizing matrix. The functionalization of the nanocomposite with sulfuric acid significantly enhances the activity of the catalyst in the selective hydrogenation of LA to GVL and allows the reaction to proceed under mild reaction conditions (100 °C, 2 MPa of H) in water and low catalyst loading (0.

Mono- and Bimetallic Nanoparticles Stabilized by an Aromatic Polymeric Network for a Suzuki Cross-Coupling Reaction.

This work addresses the Suzuki cross-coupling between 4-bromoanisole (BrAn) and phenylboronic acid (PBA) in an environmentally benign ethanol-water solvent catalysed by mono- (Pd) and bimetallic (PdAu, PdCu, PdZn) nanoparticles (NPs) stabilised within hyper-cross-linked polystyrene (HPS) bearing tertiary amino groups. Small Pd NPs of about 2 nm in diameters were formed and stabilized by HPS independently in the presence of other metals. High catalytic activity and complete conversion of BrAn was attained at low Pd loading.

Chemical Composition Control at the Substrate Interface as the Key for FeSe Thin-Film Growth.

The strong fascination exerted by the binary compound of FeSe demands reliable engineering protocols and more effective approaches toward inducing superconductivity in FeSe thin films. Our study addresses the peculiarities in pulsed laser deposition that determine FeSe thin-film growth and focuses on the film/substrate interface, which has only been considered hypothetically in the past literature. The FeSe/MgO interface has been assumed (1) to be clean and (2) to obey lattice-matching epitaxy.

Challenges for Pulsed Laser Deposition of FeSe Thin Films.

Anti-PbO-type FeSe shows an advantageous dependence of its superconducting properties with mechanical strain, which could be utilized as future sensor functionality. Although superconducting FeSe thin films can be grown by various methods, ultrathin films needed in potential sensor applications were only achieved on a few occasions. In pulsed laser deposition, the main challenges can be attributed to such factors as controlling film stoichiometry (i.

Synthesis, structure and properties of layered PrMoO-based oxymolybdates doped with Mg.

Undoped and Mg-doped PrMoO oxymolybdate polycrystals and single crystals have been prepared by solid-state reactions and flux growth. The compounds have been characterized by powder X-ray diffraction, energy-dispersive spectroscopy, inductively coupled plasma mass spectrometry, scanning transmission electron microscopy, single crystal X-ray structure analysis, differential scanning calorimetry and thermogravimetry. The (MgO)(PrO)(MoO) (x + y + z = 1) solid solution series has been shown to extend to x = 0.

Superconductivity and Shubnikov - de Haas effect in polycrystalline CdAs thin films.

In this study we observed the reproducible superconducting state in CdAs thin films without any external stimuli. Comparison with our previous results reveals similar qualitative behavior for films synthesized by different methods, while the difference in the values of the critical parameters clearly shows the possibility to control this state. The X-ray diffraction measurements demonstrate the presence of the tetragonal CdAs crystal phase in studied films.

Magnetic properties of biofunctionalized iron oxide nanoparticles as magnetic resonance imaging contrast agents.

One of the future applications of magnetic nanoparticles is the development of new iron-oxide-based magnetic resonance imaging (MRI) negative contrast agents, which are intended to improve the results of diagnostics and complement existing Gd-based contrast media. Iron oxide nanoparticles designed for use as MRI contrast media are precisely examined by a variety of methods: powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, Mössbauer spectroscopy and zero-field nuclear magnetic resonance (ZF-NMR) spectroscopy. TEM and XRD measurements reveal a spherical shape of the nanoparticles with an average diameter of 5-8 nm and a cubic spinel-type crystal structure of space group -3.

Microstructure and superconducting properties of high-rate PLD-derived GdBaCuO coated conductors with BaSnO and BaZrO pinning centers.

The microstructure of GdBaCuO based on superconducting tapes with BaSnO and BaZrO artificial pinning centers formed by high-rate pulse laser deposition in SuperOx Japan was studied by scanning/transmission electron microscopy. The artificial pinning centers have adopted columnar morphology with average diameter of about 8 nm (BaSnO-doped sample) and 6.5 nm (BaZrO-doped sample) and density of 500 μm for the both samples.

Protective Dps-DNA co-crystallization in stressed cells: an in vitro structural study by small-angle X-ray scattering and cryo-electron tomography.

Under severe or prolonged stress, bacteria produce a nonspecific DNA-binding protein (Dps), which effectively protects DNA against damaging agents both in vitro and in vivo by forming intracellular biocrystals. The phenomenon of protective crystallization of DNA in living cells has been intensively investigated during the last two decades; however, the results of studies are somewhat contradictory, and up to now, there has been no direct determination of a Dps-DNA crystal structure. Here, we report the in vitro analysis of the vital process of Dps-DNA co-crystallization using two complementary structural methods: synchrotron small-angle X-ray scattering in solution and cryo-electron tomography.

Novel type of hollow hydrogel microspheres with magnetite and silver nanoparticles.

A novel type of microcontainers based on hollow silver alginate microspheres and magnetite nanoparticles is reported as development of recently published technology. Magnetite nanoparticles were incorporated by two methods - co-precipitation with porous calcium carbonate during template formation and adsorption onto CaCO particles or microcontainers' shell. Amount of magnetite loaded and microshells size (4.

High-temperature magnetism and microstructure of a semiconducting ferromagnetic (GaSb) (MnSb) alloy.

We have studied the properties of relatively thick (about 120 nm) magnetic composite films grown by pulsed laser deposition using the eutectic compound (GaSb)(MnSb) as target for sputtering. For the studied films we have observed ferromagnetism and an anomalous Hall effect above room temperature, confirming the presence of spin-polarized carriers. Electron microscopy, atomic and magnetic force microscopy results suggest that the films under study have a homogenous columnar structure in the bulk while MnSb inclusions accumulate near the surface.

Evidence of extended cation solubility in atomic layer deposited nanocrystalline BaTiO thin films and its strong impact on the electrical properties.

Thin films of ≈50 nm thickness with Ba/Ti-ratios ranging from 0.8 to 1.06 were prepared by depositing alternating layers of Ba(OH)2 and TiO2.

Combination of Functional Nanoengineering and Nanosecond Laser Texturing for Design of Superhydrophobic Aluminum Alloy with Exceptional Mechanical and Chemical Properties.

Industrial application of metallic materials is hindered by several shortcomings, such as proneness to corrosion, erosion under abrasive loads, damage due to poor cold resistance, or weak resistance to thermal shock stresses, etc. In this study, using the aluminum-magnesium alloy as an example of widely spread metallic materials, we show that a combination of functional nanoengineering and nanosecond laser texturing with the appropriate treatment regimes can be successfully used to transform a metal into a superhydrophobic material with exceptional mechanical and chemical properties. It is demonstrated that laser chemical processing of the surface may be simultaneously used to impart multimodal roughness and to modify the composition and physicochemical properties of a thick surface layer of the substrate itself.

Formation of BiFeO from a Binary Oxide Superlattice Grown by Atomic Layer Deposition.

We report on the growth of polycrystalline BiFeO thin films on SiO /Si(001) and Pt(111) substrates by atomic layer deposition using the precursors ferrocene, triphenyl-bismuth, and ozone. By growing alternating layers of Fe O and Bi O , we employ a superlattice approach and demonstrate an efficient control of the cation stoichiometry. The superlattice decay and the resulting formation of polycrystalline BiFeO films are studied by in situ X-ray diffraction, in situ X-ray photoelectron spectroscopy, and transmission electron microscopy.

Silver Alginate Hydrogel Micro- and Nanocontainers for Theranostics: Synthesis, Encapsulation, Remote Release, and Detection.

We have designed multifunctional silver alginate hydrogel microcontainers referred to as loaded microcapsules with different sizes by assembling them via a template assisted approach using natural, highly porous calcium carbonate cores. Sodium alginate was immobilized into the pores of calcium carbonate particles of different sizes followed by cross-linking via addition of silver ions, which had a dual purpose: on one hand, the were used as a cross-linking agent, albeit in the monovalent form, while on the other hand they have led to formation of silver nanoparticles. Monovalent silver ions, an unusual cross-linking agent, improve the sensitivity to ultrasound, lead to homogeneous distribution of silver nanoparticles.

Size-Dependent Structure Relations between Nanotubes and Encapsulated Nanocrystals.

The structural organization of compounds in a confined space of nanometer-scale cavities is of fundamental importance for understanding the basic principles for atomic structure design at the nanolevel. Here, we explore size-dependent structure relations between one-dimensional PbTe nanocrystals and carbon nanotube containers in the diameter range of 2.0-1.

Fabrication and mechanical properties of composite based on β-chitin and polyacrylic acid.

Squid β-chitin has been exfoliated in aqueous acrylic acid (AA), after which a composite film of chitin microfibrils in polyacrylic acid (PAA) has been prepared by in situ polymerization of the AA. The segregated chitin fibrils in the composite are 4-6nm in diameter, with an aspect ratio >250. After drying cast films of the composites containing 1, 2 and 3% (w/w) chitin at 140°C for four hours, there was a dramatic resistance to swelling in water, in that the dried films showed only small changes in shape and properties after four hours immersed in water.

Impact of Salt Co- and Counterions on Rheological Properties and Structure of Wormlike Micellar Solutions.

Rheological properties of aqueous solutions of long-tailed cationic surfactant erucyl bis-(hydroxyethyl)methylammonium chloride (EHAC) were examined as a function of concentration C of different inorganic salts (KCl, CaCl, and LaCl) at a fixed surfactant concentration of 0.6 wt %. The structural evolution of micelles was followed by small-angle neutron scattering and cryogenic transmission electron microscopy.