Phage display identifies Affimer proteins that direct calcium carbonate polymorph formation.

A key factor in biomineralization is the use of organic molecules to direct the formation of inorganic materials. However, identification of molecules that can selectively produce the calcium carbonate polymorphs calcite or aragonite has proven extremely challenging. Here, we use a phage display approach to identify proteins - rather than the short peptides typically identified using this method - that can direct calcium carbonate formation.

Electrothermally-Driven Ultrafast Chemical Modulation of Multifunctional Nanocarbon Aerogels.

Ultrahigh-temperature Joule-heating of carbon nanostructures opens up unique opportunities for property enhancements and expanded applications. This study employs rapid electrical Joule-heating at ultrahigh temperatures (up to 3000 K within 60 s) to induce a transformation in nanocarbon aerogels, resulting in highly graphitic structures. These aerogels function as versatile platforms for synthesizing customizable metal oxide nanoparticles while significantly reducing carbon emissions compared to conventional furnace heating methods.

Activating a high-spin iron(II) complex to thermal spin-crossover with an inert non-isomorphous molecular dopant.

[Fe(bpp)][ClO] (bpp = 2,6-bis{pyrazol-1-yl}pyridine; monoclinic, 2/) is high-spin between 5-300 K, and crystallises with a highly distorted molecular geometry that lies along the octahedral-trigonal prismatic distortion pathway. In contrast, [Ni(bpp)][ClO] (monoclinic, 2) adopts a more regular, near-octahedral coordination geometry. Gas phase DFT minimisations (ω-B97X-D/6-311G**) of [M(bpp)] complexes show the energy penalty associated with that coordination geometry distortion runs as M = Fe (HS) ≈ Mn (HS) < Zn ≈ Co (HS) ≲ Cu ≪ Ni ≪ Ru (LS; HS = high-spin, LS = low-spin).

Investigation of the Dynamic Behaviour of H and D in a Kinetic Quantum Sieving System.

Porous organic cages (POCs) are nanoporous materials composed of discrete molecular units that have uniformly distributed functional pores. The intrinsic porosity of these structures can be tuned accurately at the nanoscale by altering the size of the porous molecules, particularly to an optimal size of 3.6 Å, to harness the kinetic quantum sieving effect.

Electrothermal Transformations within Graphene-Based Aerogels through High-Temperature Flash Joule Heating.

Flash Joule heating of highly porous graphene oxide (GO) aerogel monoliths to ultrahigh temperatures is exploited as a low carbon footprint technology to engineer functional aerogel materials. Aerogel Joule heating to up to 3000 K is demonstrated for the first time, with fast heating kinetics (∼300 K·min), enabling rapid and energy-efficient flash heating treatments. The wide applicability of ultrahigh-temperature flash Joule heating is exploited in a range of material fabrication challenges.

Universality of Hair as a Nucleant: Exploring the Effects of Surface Chemistry and Topography.

The ability to control crystal nucleation through the simple addition of a nucleating agent (nucleant) is desirable for a huge range of applications. However, effective nucleating agents are known for only a small number of systems, and many questions remain about the mechanisms by which they operate. Here, we explore the features that make an effective nucleant and demonstrate that the biological material hair-which naturally possesses a chemically and topographically complex surface structure-has excellent potential as an effective nucleating agent.

Electron transparent nanotubes reveal crystallization pathways in confinement.

The cylindrical pores of track-etched membranes offer excellent environments for studying the effects of confinement on crystallization as the pore diameter is readily varied and the anisotropic morphologies can direct crystal orientation. However, the inability to image individual crystals within the pores in this system has prevented many of the underlying mechanisms from being characterized. Here, we study the crystallization of calcium sulfate within track-etched membranes and reveal that oriented gypsum forms in 200 nm diameter pores, bassanite in 25-100 nm pores and anhydrite in 10 nm pores.

Serial small- and wide-angle X-ray scattering with laboratory sources.

Recent advances in X-ray instrumentation and sample injection systems have enabled serial crystallography of protein nanocrystals and the rapid structural analysis of dynamic processes. However, this progress has been restricted to large-scale X-ray free-electron laser (XFEL) and synchrotron facilities, which are often oversubscribed and have long waiting times. Here, we explore the potential of state-of-the-art laboratory X-ray systems to perform comparable analyses when coupled to micro- and millifluidic sample environments.

Positively Charged Additives Facilitate Incorporation in Inorganic Single Crystals.

Incorporation of guest additives within inorganic single crystals offers a unique strategy for creating nanocomposites with tailored properties. While anionic additives have been widely used to control the properties of crystals, their effective incorporation remains a key challenge. Here, we show that cationic additives are an excellent alternative for the synthesis of nanocomposites, where they are shown to deliver exceptional levels of incorporation of up to 70 wt % of positively charged amino acids, polymer particles, gold nanoparticles, and silver nanoclusters within inorganic single crystals.

Incorporation of nanogels within calcite single crystals for the storage, protection and controlled release of active compounds.

Nanocarriers have tremendous potential for the encapsulation, storage and delivery of active compounds. However, current formulations often employ open structures that achieve efficient loading of active agents, but that suffer undesired leakage and instability of the payloads over time. Here, a straightforward strategy that overcomes these issues is presented, in which protein nanogels are encapsulated within single crystals of calcite (CaCO).

Facile Synthesis of Electrically Conductive and Heatable Nanoparticle/Nanocarbon Hybrid Aerogels.

Joule heating studies on nanoparticle/nanocarbon hybrid aerogels have been reported, but systematic investigations on hydrotalcite-derived catalysts supported onto reduced graphene oxide (rGO) aerogels are rare. In this study, hydrotalcite-derived Cu-AlO nanoparticles were incorporated into a porous and multifunctional rGO aerogel support for fabricating electrically conducting Cu-AlO/rGO hybrid aerogels, and their properties were investigated in detail. The hybridization of Cu-AlO with a 3D nanocarbon support network imparts additional functionalities to the widely used functional inorganic nanoparticles, such as direct electrical framework heating and easy regeneration and separation of spent nanoparticles, with well-spaced nanoparticle segregation.

Tuning stable noble metal nanoparticles dispersions to moderate their interaction with model membranes.

Hypothesis: The properties of stable gold (Au) nanoparticle dispersions can be tuned to alter their activity towards biomembrane models.

Experiments: Au nanoparticle coating techniques together with rapid electrochemical screens of a phospholipid layer on fabricated mercury (Hg) on platinum (Pt) electrode have been used to moderate the phospholipid layer activity of Au nanoparticle dispersions. Screening results for Au nanoparticle dispersions were intercalibrated with phospholipid large unilamellar vesicle (LUV) interactions using a carboxyfluorescein (CF) leakage assay.

Pyrene Tags for the Detection of Carbohydrates by Label-Assisted Laser Desorption/Ionisation Mass Spectrometry*.

Matrix-assisted laser desorption/ionisation mass spectrometry (MALDI-MS) is widely used for the analysis of biomolecules. Label-assisted laser desorption/ionisation mass spectrometry (LALDI-MS) is a matrix-free variant of MALDI-MS, in which only analytes covalently attached to a laser desorption/ionisation (LDI) enhancer are detected. LALDI-MS has shown promise in overcoming the limitations of MALDI-MS in terms of sample preparation and MS analysis.

Ptychographic X-ray tomography reveals additive zoning in nanocomposite single crystals.

Single crystals containing nanoparticles represent a unique class of nanocomposites whose properties are defined by both their compositions and the structural organization of the dispersed phase in the crystalline host. Yet, there is still a poor understanding of the relationship between the synthesis conditions and the structures of these materials. Here ptychographic X-ray computed tomography is used to visualize the three-dimensional structures of two nanocomposite crystals - single crystals of calcite occluding diblock copolymer worms and vesicles.

Demonstration of Visible Light-Activated Photocatalytic Self-Cleaning by Thin Films of Perovskite Tantalum and Niobium Oxynitrides.

Metal oxynitrides adopting the perovskite structure have been shown to be visible light-activated photocatalysts, and therefore, they have potential as self-cleaning materials where surface organic pollutants can be removed by photomineralization. In this work, we establish a route for the deposition of thin films for seven perovskite oxynitrides, CaTaON, SrTaON, BaTaON, LaTaON, EuTaON, SrNbON, and LaNbON, on quartz and alumina substrates using dip-coating of a polymer gel to form an amorphous oxide precursor film, followed by ammonolysis. The initially deposited oxide films were annealed at 800 °C, followed by ammonolysis at temperatures from 850 to 1000 °C.

Hydroxyl-rich macromolecules enable the bio-inspired synthesis of single crystal nanocomposites.

Acidic macromolecules are traditionally considered key to calcium carbonate biomineralisation and have long been first choice in the bio-inspired synthesis of crystalline materials. Here, we challenge this view and demonstrate that low-charge macromolecules can vastly outperform their acidic counterparts in the synthesis of nanocomposites. Using gold nanoparticles functionalised with low charge, hydroxyl-rich proteins and homopolymers as growth additives, we show that extremely high concentrations of nanoparticles can be incorporated within calcite single crystals, while maintaining the continuity of the lattice and the original rhombohedral morphologies of the crystals.

Heterometallic Coordination Polymer Gels Supported by 2,4,6-Tris(pyrazol-1-yl)-1,3,5-triazine.

Complexes of type [M(tpt)]X (M = Fe, Co, Ni; tpt = 2,4,6-tri{pyrazol-1-yl}-1,3,5-triazine; X = BF or ClO ) crystallize in a cubic lattice, with the metal ion and ligand conformation showing unusual symmetry-imposed disorder. Addition of 1 equiv AgX to the corresponding preformed [M(tpt)]X salt in concentrated MeNO solution affords thixotropic gels. Gelation was not observed in analogous reactions using [Mn(tpt)][ClO], or from reactions in other, more donating solvents.

Observation of visible light activated photocatalytic degradation of stearic acid on thin films of tantalum oxynitride synthesized by aerosol assisted chemical vapour deposition.

UV activated photocatalysts deposited using chemical vapour deposition have found commercial success as self-cleaning coatings. However, only limited work has been conducted on the use of the more recently discovered visible light activated photocatalysis for this application. Tantalum oxynitride is an established visible light photocatalyst, and in this paper we have investigated the ability of thin films of tantalum oxynitride to photocatalytically degrade a model organic pollutant, stearic acid, and therefore assess the coatings potential for self-cleaning applications.

Fabrication of Hybrid Materials from Titanium Dioxide and Natural Phenols for Efficient Radical Scavenging against Oxidative Stress.

Oxidative stress caused by free radicals is one of the great threats to inflict intracellular damage. Here, we report a convenient approach to the synthesis, characterization, and evaluation of the radical activity of titanium-based composites. We have investigated the potential of natural antioxidants (curcumin, quercetin, catechin, and vitamin E) as radical scavengers and stabilizers.

Spatially Controlled Occlusion of Polymer-Stabilized Gold Nanoparticles within ZnO.

In principle, incorporating nanoparticles into growing crystals offers an attractive and highly convenient route for the production of a wide range of novel nanocomposites. Herein we describe an efficient aqueous route that enables the spatially controlled occlusion of gold nanoparticles (AuNPs) within ZnO crystals at up to 20 % by mass. Depending on the precise synthesis protocol, these AuNPs can be (i) solely located within a central region, (ii) uniformly distributed throughout the ZnO host crystal or (iii) confined to a surface layer.

Anionic block copolymer vesicles act as Trojan horses to enable efficient occlusion of guest species into host calcite crystals.

We report a versatile 'Trojan Horse' strategy using highly anionic poly(methacrylic acid)-poly(benzyl methacrylate) vesicles to incorporate two types of model payloads, either silica nanoparticles or an organic dye (fluorescein), within CaCO (calcite). Uniform occlusion of silica-loaded vesicles was confirmed by scanning electron microscopy, while thermogravimetry studies indicated extents of vesicle occlusion of up to 9.4% by mass (∼33% by volume).

Generation of ultra-stable Pickering microbubbles via poly alkylcyanoacrylates.

A range of solution conditions (pH, surfactant concentration and type) have been tested for the polymerization of alkyl cyanoacrylates (ethyl (ECA), butyl (BCA) and octyl (OCA)) into nanoparticles (NPs) potentially capable of stabilizing highly unstable microbubbles (MBs) of air in aqueous solutions. The optimum system was butyl cyanoacrylate (BCA) polymerized into PBCA particles at pH 4 in the presence of 1 wt.% Tyloxapol surfactant.

Phosphinecarboxamide as an unexpected phosphorus precursor in the chemical vapour deposition of zinc phosphide thin films.

This paper demonstrates the use of phosphinecarboxamide as a facile phosphorus precursor, which can be used alongside zinc acetate for the chemical vapour deposition (CVD) of adherent and crystalline zinc phosphide films. Thin films of Zn3P2 have a number of potential applications and phosphinecarboxamide is a safer and more efficient precursor than the highly toxic, corrosive and flammable phosphine used in previous CVD syntheses.