Automated tuning of a ring-assisted MZI-based interleaver for Kerr frequency combs.

We demonstrate a compact ring-assisted Mach-Zehnder interferometer (RAMZI)-based silicon photonic interleaver with a 400 GHz free spectral range (FSR), featuring flat passbands exceeding a spectral range of 50 nm. Additionally, we introduce a novel, to the best of our knowledge, add-on structure and tuning method enabling automated compensation for fabrication imperfections, precise shaping of the RAMZI flat-top passbands, and alignment with Kerr comb lines. Experimental results have shown successful interleaving of eight channels of distributed-feedback (DFB) lasers as well as a 200 GHz Kerr comb, both achieving an extinction ratio of approximately 20 dB.

Quantum state tomography in a third-order integrated optical parametric oscillator.

We measured the covariance matrix of the fields generated in an integrated third-order optical parametric oscillator operating above threshold. We observed up to (2.3 ± 0.

Unzipping hBN with ultrashort mid-infrared pulses.

Manipulating the nanostructure of materials is critical for numerous applications in electronics, magnetics, and photonics. However, conventional methods such as lithography and laser writing require cleanroom facilities or leave residue. We describe an approach to creating atomically sharp line defects in hexagonal boron nitride (hBN) at room temperature by direct optical phonon excitation with a mid-infrared pulsed laser from free space.

All-optical frequency division on-chip using a single laser.

The generation of spectrally pure microwave signals is a critical functionality in fundamental and applied sciences, including metrology and communications. Optical frequency combs enable the powerful technique of optical frequency division (OFD) to produce microwave oscillations of the highest quality. Current implementations of OFD require multiple lasers, with space- and energy-consuming optical stabilization and electronic feedback components, resulting in device footprints incompatible with integration into a compact and robust photonic platform.

Phonon-enhanced nonlinearities in hexagonal boron nitride.

Polar crystals can be driven into collective oscillations by optical fields tuned to precise resonance frequencies. As the amplitude of the excited phonon modes increases, novel processes scaling non-linearly with the applied fields begin to contribute to the dynamics of the atomic system. Here we show two such optical nonlinearities that are induced and enhanced by the strong phonon resonance in the van der Waals crystal hexagonal boron nitride (hBN).

Integrated femtosecond pulse generator on thin-film lithium niobate.

Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications, including optical atomic clocks, microwave photonics, spectroscopy, optical wave synthesis, frequency conversion, communications, lidar, optical computing and astronomy. The leading approaches for on-chip pulse generation rely on mode-locking inside microresonators with either third-order nonlinearity or with semiconductor gain. These approaches, however, are limited in noise performance, wavelength and repetition rate tunability .

Active tuning of dispersive waves in Kerr soliton combs.

Kerr soliton combs operate in the anomalous group-velocity dispersion regime through the excitation of dissipative solitons. The generated bandwidth is largely dependent on the cavity dispersion, with higher-order dispersion contributing to dispersive-wave (DW) generation that allows for power enhancement of the comb lines at the wings of the spectrum. However, the spectral position of the DW is highly sensitive to the overall cavity dispersion, and the inevitable dimension variations that occur during the fabrication process result in deviations in the DW emission wavelength.

Theory of χ-microresonator-based frequency conversion.

Microresonator-based platforms with ${\chi ^{(2)}}$ nonlinearities have the potential to perform frequency conversion at high efficiencies and ultralow powers with small footprints. The standard doctrine for achieving high conversion efficiency in cavity-based devices requires "perfect matching," that is, zero phase mismatch while all relevant frequencies are precisely at a cavity resonance, which is difficult to achieve in integrated platforms due to fabrication errors and limited tunabilities. In this Letter, we show that the violation of perfect matching does not necessitate a reduction in conversion efficiency.

Synchronization of nonsolitonic Kerr combs.

Synchronization is a ubiquitous phenomenon in nature that manifests as the spectral or temporal locking of coupled nonlinear oscillators. In the field of photonics, synchronization has been implemented in various laser and oscillator systems, enabling applications including coherent beam combining and high-precision pump-probe measurements. Recent experiments have also shown time-domain synchronization of Kerr frequency combs via coupling of two separate oscillators operating in the dissipative soliton [i.

Soliton-effect compression of picosecond pulses on a photonic chip.

We report soliton-effect pulse compression of low energy (∼25), picosecond pulses on a photonic chip. An ultra-low-loss, dispersion-engineered 40-cm-long waveguide is used to compress 1.2-ps pulses by a factor of 18, which represents, to our knowledge, the largest compression factor yet experimentally demonstrated on-chip.

Conversion efficiency of soliton Kerr combs.

We investigate the conversion efficiency (CE) of soliton modelocked Kerr frequency combs. Our analysis reveals three distinct scaling regimes of CE with the cavity free spectral range (FSR), which depends on the relative contributions of the coupling and propagation loss to the total cavity loss. Our measurements, for the case of critical coupling, verify our theoretical prediction over a range of FSRs and pump powers.

Nonlinear refractive index of solids in mid-infrared.

We measure the third-order nonlinear optical response of various dielectrics and semiconductors using the spectrally resolved two-beam coupling method at 2.3 µm, 3.5 µm, 4.

Demonstration of chip-based coupled degenerate optical parametric oscillators for realizing a nanophotonic spin-glass.

The need for solving optimization problems is prevalent in various physical applications, including neuroscience, network design, biological systems, socio-economics, and chemical reactions. Many of these are classified as non-deterministic polynomial-time hard and thus become intractable to solve as the system scales to a large number of elements. Recent research advances in photonics have sparked interest in using a network of coupled degenerate optical parametric oscillators (DOPOs) to effectively find the ground state of the Ising Hamiltonian, which can be used to solve other combinatorial optimization problems through polynomial-time mapping.

Near-Degenerate Quadrature-Squeezed Vacuum Generation on a Silicon-Nitride Chip.

Squeezed states are a primary resource for continuous-variable (CV) quantum information processing. To implement CV protocols in a scalable and robust way, it is desirable to generate and manipulate squeezed states using an integrated photonics platform. In this Letter, we demonstrate the generation of quadrature-phase squeezed states in the radio-frequency carrier sideband using a small-footprint silicon-nitride microresonator with a dual-pumped four-wave-mixing process.

Performance scaling of a 10-GHz solid-state laser enabling self-referenced CEO frequency detection without amplification.

A simple and compact straight-cavity laser oscillator incorporating a cascaded quadratic nonlinear crystal and a semiconductor saturable absorber mirror (SESAM) can deliver stable femtosecond modelocking at high pulse repetition rates >10 GHz. In this paper, we experimentally investigate the influence of intracavity dispersion, pump brightness, and cavity design on modelocking with high repetition rates, and use the resulting insights to demonstrate a 10.4-GHz straight-cavity SESAM-modelocked Yb:CALGO laser delivering 108-fs pulses with 812 mW of average output power.

Raman lasing and soliton mode-locking in lithium niobate microresonators.

The recent advancement in lithium-niobite-on-insulator (LNOI) technology is opening up new opportunities in optoelectronics, as devices with better performance, lower power consumption and a smaller footprint can be realised due to the high optical confinement in the structures. The LNOI platform offers both large and nonlinearities along with the power of dispersion engineering, enabling brand new nonlinear photonic devices and applications for the next generation of integrated photonic circuits. However, Raman scattering and its interaction with other nonlinear processes have not been extensively studied in dispersion-engineered LNOI nanodevices.

Ionization-assisted refocusing of femtosecond Gaussian beams.

Ionization occurs ubiquitously in intense laser-matter interaction and often leads to rapid decrease in laser intensity via plasma defocusing, shortening the effective interaction length of desired high-field processes. Refocusing of pulses may compensate for this adverse effect. However, it typically relies on Kerr-induced self-focusing and requires sufficiently high power.

Observation of Arnold Tongues in Coupled Soliton Kerr Frequency Combs.

We demonstrate various regimes of synchronization in systems of two coupled cavity soliton-based Kerr frequency combs. We show subharmonic, harmonic, and harmonic-ratio synchronization of coupled microresonators, and reveal their dynamics in the form of Arnold tongues, structures that are ubiquitous in nonlinear dynamical systems. Our experimental results are well corroborated by numerical simulations based on coupled Lugiato-Lefever equations.

Turn-key, high-efficiency Kerr comb source.

We demonstrate an approach for automated Kerr comb generation in the normal group-velocity dispersion (GVD) regime. Using a coupled-ring geometry in silicon nitride, we precisely control the wavelength location and splitting strength of avoided mode crossings to generate low-noise frequency combs with pump-to-comb conversion efficiencies of up to 41%, which is the highest reported to date for normal-GVD Kerr combs. Our technique enables on-demand generation of a high-power comb source for applications such as wavelength-division multiplexing in optical communications.

Chip-based frequency comb sources for optical coherence tomography.

Optical coherence tomography (OCT) is a powerful interferometric imaging technique widely used in medical fields such as ophthalmology, cardiology and dermatology. Superluminescent diodes (SLDs) are widely used as light sources in OCT. Recently integrated chip-based frequency combs have been demonstrated in numerous platforms and the possibility of using these broadband chip-scale combs for OCT has been raised extensively over the past few years.

Microfluidic mid-infrared spectroscopy via microresonator-based dual-comb source.

Over the past decade, microresonator-based soliton combs based on photonic integration have broadened the scope of applications in sensing, ranging, and imaging. The large comb line spacing on the order of hundreds of gigahertz allows for rapid acquisition of absorption spectra in the condensed matter phase without aliasing via a dual-comb interferometer. We present a proof-of-principle demonstration of high-throughput label-free microresonator-based dual-comb spectroscopy in a microfluidic chip that dynamically probes the linear absorption of liquid acetone in the mid-infrared wavelength regime.

Supercontinuum generation in angle-etched diamond waveguides.

We experimentally demonstrate on-chip supercontinuum generation in the visible region in angle-etched diamond waveguides. We measure an output spectrum spanning 670-920 nm in a 5-mm-long waveguide using 100-fs pulses with 187 pJ of incident pulse energy. Our fabrication technique, combined with diamond's broad transparency window, offers a potential route toward broadband supercontinuum generation in the UV domain.