Electrochemical functionalization at anodic conditions of multi-walled carbon nanotubes with chlorodiphenylphosphine.

Covalent functionalization of multi-walled carbon nanotubes (MWCNTs) and oxidized MWCNTs (o-MWCNTs) with chlorodiphenylphosphine (PhPCl) has been studied by cyclic voltammetry in organic medium. Depending the upper potential limit used in the electrochemical functionalization, different amount of phosphorus incorporation n is obtained, as result of the formation of radical species during the electrochemical oxidation of the PhPCl. The electrochemical oxidation of PhPCl promotes the covalent attachment of diphenylphosphine-like structure on the carbon nanotube surface.

Tuning graphene transistors through ad hoc electrostatics induced by a nanometer-thick molecular underlayer.

We report on the modulation of the electrical properties of graphene-based transistors that mirror the properties of a few nanometers thick layer made of dipolar molecules sandwiched in between the 2D material and the SiO dielectric substrate. The chemical composition of the films of quinonemonoimine zwitterion molecules adsorbed onto SiO has been explored by means of X-ray photoemission and mass spectroscopy. Graphene-based devices are then fabricated by transferring the 2D material onto the molecular film, followed by the deposition of top source-drain electrodes.

Functionalized TiO Nanorods on a Microcantilever for the Detection of Organophosphorus Chemical Agents in Air.

We report the fabrication of nanostructured microcantilevers employed as sensors for the detection of organophosphorus (OPs) vapors. These micromechanical sensors are prepared using a two-step procedure first optimized on a silicon wafer. TiO one-dimensional nanostructures are synthesized at a silicon surface by a solvothermal method and then grafted with bifunctional molecules having an oxime group known for its strong affinity with organophosphorus compounds.

Multilayer graphene functionalized through thermal 1,3-dipolar cycloadditions with imino esters: a versatile platform for supported ligands in catalysis.

Multilayer graphene (MLG), obtained by mild sonication of graphite in NMP or pyridine, was fully characterized via atomic force microscopy (AFM), transmission electron microscopy (TEM), Raman spectroscopy and X-ray photoemission spectroscopy (XPS). Then, it was functionalized via 1,3-dipolar cycloaddition with azomethine ylides generated by thermal 1,2-prototropy of various imino esters. The resulting MLG, containing substituted proline-based amine functions, was characterized by XPS and it showed high nitrogen loading, ranging from 0.

Mono- and polynuclear Ag(i) complexes of N-functionalized bis(diphenylphosphino)amine DPPA-type ligands: synthesis, solid-state structures and reactivity.

The reactivity of the N-functionalized DPPA-type ligands (PhP)N(p-Z)CH [Z = H (1a), SMe (1b), OMe (1c)] with AgBF was investigated and revealed an unexpected influence of the para substituent Z of the N-aryl ligand. In acetone, the mononuclear bis-chelated [Ag{(1a-1c)-P,P}]BF (2a·BF-2c·BF) and dinuclear bridged [Ag{μ-(1a-1c)-P,P}](BF) [3a·(BF)-3c·(BF)] complexes were obtained with a 1 : 2 and 1 : 1 AgBF/ligand molar ratio, respectively. While the molecular structures of 2a·BF and 2b·BF determined in the solid-state by X-ray diffraction revealed their mononuclear nature and the absence of cation/anion interaction, complexes 3b·(BF) and 3c·(BF) form 2D coordination polymers through intermolecular Ag-S or Ag-O interactions, respectively, involving the N-function of the respective DPPA-type ligand, and display direct interactions between one BF anion and both Ag(i) cations.

Functional Short-Bite Ligands: Synthesis, Coordination Chemistry, and Applications of N-Functionalized Bis(diaryl/dialkylphosphino)amine-type Ligands.

The aim of this review is to highlight how the diversity generated by N-substitution in the well-known short-bite ligand bis(diphenylphosphino)amine (DPPA) allows a fine-tuning of the ligand properties and offers a considerable scope for tailoring the properties and applications of their corresponding metal complexes. The various N-substituents include nitrogen-, oxygen-, phosphorus-, sulfur-, halogen-, and silicon-based functionalities and directly N-bound metals. Multiple DPPA-type ligands linked through an organic spacer and N-functionalized DRPA-type ligands, in which the PPh2 substituents are replaced by PR2 (R = alkyl, benzyl) groups, are also discussed.

Reversible switching of the coordination modes of a pyridine-functionalized quinonoid zwitterion; its di- and tetranuclear palladium complexes.

The coordination chemistry of a new functional quinonoid zwitterion (E)-3-oxo-4-((2-(pyridin-2-yl)ethyl)amino)-6-((2-(pyridin-2-yl)ethyl)iminio)cyclohexa-1,4-dienolate (2, H2L), in which a CH2CH2 spacer connects the N substituents of the quinonoid core with a pyridine group, was explored in Pd(II) chemistry. Different coordination modes have been observed, depending on the experimental conditions and the reagents. The reaction of H2L with [Pd(μ-Cl)(dmba)]2 (dmba = o-C6H4CH2NMe2-C,N) afforded the dinuclear complex [{PdCl(dmba)}2(H2L)] (3) in which H2L acts as a NPy,NPy bidentate ligand.

A comparative synthetic, magnetic and theoretical study of functional M₄Cl₄ cubane-type Co(II) and Ni(II) complexes.

We describe the synthesis, structures, and magnetochemistry of new M4Cl4 cubane-type cobalt(II) and nickel(II) complexes with the formula [M(μ3-Cl)Cl(HL·S)]4 (1: M = Co; 2: M = Ni), where HL·S represents a pyridyl-alcohol-type ligand with a thioether functional group, introduced to allow subsequent binding to Au surfaces. Dc and ac magnetic susceptibility data of 1 and 2 were modeled with a full spin Hamiltonian implemented in the computational framework CONDON 2.0.

Solvent-dependent reversible ligand exchange in nickel complexes of a monosulfide bis(diphenylphosphino)(N-thioether)amine.

The coordination chemistry of the DPPA-type functional phosphine bis(diphenylphosphino)(N-thioether)amine N(PPh2)2(CH2)3SMe () and its monosulfide derivative, (Ph2P)N{P(S)Ph2}(CH2)3SMe (1·S), towards Ni(II) precursors has been investigated. The crystal structures of N{P(S)Ph2}2(CH2)3SMe (1·S2), [NiCl2{(Ph2P)2N(CH2)3SMe-P,P}] (2), [NiCl2((Ph2P)N{P(S)Ph2}(CH2)3SMe-P,S)] (3), [Ni((Ph2P)N{P(S)Ph2}(CH2)3SMe-P,S)2]NiCl4 (3'), [Ni((Ph2P)N{P(S)Ph2}(CH2)3SMe-P,S)2](BF4)2 (4), and [Ni((Ph2P)NH{P(S)Ph2}-P,S)2]Cl2 (5) have been determined by single-crystal X-ray diffraction. In all of the complexes with the hybrid ligand 1·S, P,S-chelation to the Ni(II) center is observed.

Influence of a thioether function in short-bite diphosphine ligands on the nature of their silver complexes: structure of a trinuclear complex and of a coordination polymer.

New cationic Ag(I) complexes were prepared by reaction of AgBF4 with two thioether-functionalized bis(diphenylphosphino)amine ligands, Ph2PN(p-ArSMe)PPh2 (L1) and Ph2PN(n-PrSMe)PPh2 (L2), and compared with those obtained from the unfunctionalized ligands Ph2PN(Ph)PPh2 (L3) and Ph2PN(n-Bu)PPh2 (L4), respectively. The complex [Ag3(μ3-Cl)2(μ2-L1-P,P)3](BF4) (1·BF4) contains a triangular array of Ag centres supported by three bridging L1 ligands and two triply-bridging chlorides. In contrast, ligand L2 led to the coordination polymer [{Ag2(μ3-L2,-P,P,S)2(MeCN)2}{Ag2(μ2-L2-P,P)2(MeCN)2}(BF4)4]n (2) in which the tethered thioether group connects intermolecularly a Ag2 unit to the diphosphine bridging the other Ag2 unit.