A look underneath the SiO2/4H-SiC interface after N2O thermal treatments.

The electrical compensation effect of the nitrogen incorporation at the SiO2/4H-SiC (p-type) interface after thermal treatments in ambient N2O is investigated employing both scanning spreading resistance microscopy (SSRM) and scanning capacitance microscopy (SCM). SSRM measurements on p-type 4H-SiC areas selectively exposed to N2O at 1150 °C showed an increased resistance compared to the unexposed ones; this indicates the incorporation of electrically active nitrogen-related donors, which compensate the p-type doping in the SiC surface region. Cross-sectional SCM measurements on SiO2/4H-SiC metal/oxide/semiconductor (MOS) devices highlighted different active carrier concentration profiles in the first 10 nm underneath the insulator-substrate interface depending on the SiO2/4H-SiC roughness.

Nanoscale electro-structural characterisation of ohmic contacts formed on p-type implanted 4H-SiC.

This work reports a nanoscale electro-structural characterisation of Ti/Al ohmic contacts formed on p-type Al-implanted silicon carbide (4H-SiC). The morphological and the electrical properties of the Al-implanted layer, annealed at 1700°C with or without a protective capping layer, and of the ohmic contacts were studied using atomic force microscopy [AFM], transmission line model measurements and local current measurements performed with conductive AFM.The characteristics of the contacts were significantly affected by the roughness of the underlying SiC.

Near-surface processing on AlGaN/GaN heterostructures: a nanoscale electrical and structural characterization.

The effects of near-surface processing on the properties of AlGaN/GaN heterostructures were studied, combining conventional electrical characterization on high-electron mobility transistors (HEMTs), with advanced characterization techniques with nanometer scale resolution, i.e., transmission electron microscopy, atomic force microscopy (AFM) and conductive atomic force microscopy (C-AFM).