Mixed glycerol and orange peel-based substrate for fed-batch microbial biodiesel production.

The aqueous extraction of orange peel waste (OPW), the byproduct of the juice extraction process generated annually in massive amounts (21 Mton), yields a carbohydrate-rich liquid fraction, termed orange peel extract (OPE). Several studies highlight that the combination of glycerol, a biodiesel byproduct, with carbohydrate mixtures might boost microbial lipid production. This study performed first a shaken flask screening of 15 oleaginous yeast strains based on their growth and lipid-producing abilities on OPE- and glycerol-based media.

Development of laboratory-scale sequential electrokinetic and biological treatment of chronically hydrocarbon-impacted soils.

This study focused on the remediation of a chronically diesel-polluted soil by combining an electrokinetic treatment with a variety of bioremediation approaches. Priority within the sequential treatment was given to electrokinetic remediation (EKR) since the application of natural attenuation (NA), biostimulation and site-specific bio-augmentation resulted in very low degradation performance for total petroleum hydrocarbons (TPH) and polycyclic hydrocarbons (PAH). The application of 20-day EKR (1.

Orange peel waste-based liquid medium for biodiesel production by oleaginous yeasts.

Orange peel waste (OPW), the primary byproduct of the juice extraction process, is annually generated in massive amounts (21 Mton), and its aqueous extraction in biorefining operations yields a liquid fraction, referred to as orange peel extract (OPE). Although OPE contains significant amounts of easily assimilable carbohydrates, such as fructose, glucose, and sucrose, no investigations have been conducted yet to assess its possible use in biodiesel production by oleaginous yeasts. Consequently, the objective of the present study was to assess whether OPE might act as the basis of a liquid medium for microbial lipid production.

Mechanisms of arsenic assimilation by plants and countermeasures to attenuate its accumulation in crops other than rice.

Arsenic is a ubiquitous metalloid in the biosphere, and its origin can be either geogenic or anthropic. Four oxidation states (-3, 0, +3 and + 5) characterize organic and inorganic As- compounds. Although arsenic is reportedly a toxicant, its harmful effects are closely related to its chemical form: inorganic compounds are most toxic, followed by organic ones and finally by arsine gas.

Time-Dependent Changes in Morphostructural Properties and Relative Abundances of Contributors in / Mixed Biofilms.

dual biofilms with bacteria are known to be involved in rock phosphate solubilization, endophytic colonization, and even in nitrogen fixation. Despite these relevant implications, no information is currently available on the architecture of -based dual biofilms. In addition to this, there is a limited amount of information regarding the estimation of the temporal changes in the relative abundances of the partners in such binary systems.

sp. nov., a halotolerant species isolated from olive brine.

A facultative halo-tolerant strain was isolated from olive brine waste, the effluent from the debittering process of table olives. Phenotypic and molecular characteristics showed clearly that the isolate represents a novel species. Based on the source of isolation, the new species has been named .

Preparation of Lignin Nanoparticles from Wood Waste for Wood Surface Treatment.

Lignin was isolated from wood wastes comprising Iroko sawdust (IR) and mixed sawdust from Iroko and Norway spruce (IRNS), furnished by a local wood houses producer. The respective acidolysis lignin fractions were structurally characterized using pyrolysis (Py)-GCMS, two-dimensional heteronuclear single quantum correlation nuclear magnetic resonance (2D HSQC NMR), Fourier-transform infrared FTIR and ultraviolet-visible (UV-VIS) spectroscopies, size exclusion chromatography, and standard wet-chemistry methods for Klason lignin and polysaccharides determination. The isolated lignin fractions were subsequently used for the preparation of lignin nanoparticles (LNPs) using a non-solvent method.

Production of lignin-modifying enzymes by Trametes ochracea on high-molecular weight fraction of olive mill wastewater, a byproduct of olive oil biorefinery.

The high-molecular weight fraction of olive mill wastewater (HMW-OMW), a byproduct of olive oil biorefinery, was used at the reactor level as the basal medium for production of laccase and Mn-dependent peroxidase (MnP) by Trametes ochracea. Three reactor systems, namely stirred tank reactors equipped with either Rushton turbines or marine impeller and draft tube (STR and STR-MD, respectively) and an air-lift reactor (ALR) were compared for this purpose. Although inocula were supplied as intact pellets, in both STR-based systems fungal growth evolved rapidly into a dispersed form while the ALR enabled the maintenance of the pellet growth mode.

Fungal Community Structure and As-Resistant Fungi in a Decommissioned Gold Mine Site.

Although large quantities of heavy metal laden wastes are released in an uncontrolled manner by gold mining activities with ensuing contamination of the surrounding areas, there is scant information on the mycobiota of gold-mine sites. Thus, the present study was aimed to describe the fungal community structure in three differently As- and Hg-polluted soils collected from the Pestarena decommissioned site by using Illumina® metabarcoding. Fungal richness was found to increase as the contamination level increased while biodiversity was not related to the concentrations of inorganic toxicants.

Impact of the Fenton-like treatment on the microbial community of a diesel-contaminated soil.

Fenton-like treatment (FLT) is an ISCO technique relying on the iron-induced HO activation in the presence of additives aimed at increasing the oxidant lifetime and maximizing iron solubility under natural soil pH conditions. The efficacy of FLT in the clean-up of hydrocarbon-contaminated soils is well established at the field-scale. However, a better assessment of the impact of the FLT on density, diversity and activity of the indigenous soil microbiota, might provide further insights into an optimal combination between FLT and in-situ bioremediation (ISB).

A sustainable use of Ricotta Cheese Whey for microbial biodiesel production.

The increasing demand of plant oils for biodiesel production has highlighted the need for alternative strategies based either on non-food crops or agro-industrial wastes that do not compete with food and feed production. In this context, the combined use of wastewater and oleaginous microorganisms could be a valuable production option. Ricotta cheese whey (RCW), one of the major byproducts of the dairy industry, is produced in very high and steadily increasing amounts and, due to its high organic load, its disposal is cost-prohibitive.

Bioremediation of long-term PCB-contaminated soil by white-rot fungi.

The objective of this work was to test the PCB-degrading abilities of two white-rot fungi, namely Pleurotus ostreatus and Irpex lacteus, in real contaminated soils with different chemical properties and autochthonous microflora. In addition to the efficiency in PCB removal, attention was given to other important parameters, such as changes in the toxicity and formation of PCB transformation products. Moreover, structural shifts and dynamics of both bacterial and fungal communities were monitored using next-generation sequencing and phospholipid fatty acid analysis.

Comparative assessment of fungal augmentation treatments of a fine-textured and historically oil-contaminated soil.

The removal of aged hydrophobic contaminants from fine-textured soils is a challenging issue in remediation. The objective of this study was to compare the efficacy of augmentation treatments to that of biostimulation in terms of total aliphatic hydrocarbon (TAH) and toxicity removal from a historically contaminated clay soil and to assess their impact on the resident microbial community. To this aim, Pleurotus ostreatus, Botryosphaeria rhodina and a combination of both were used as the inoculants while the addition of a sterilized lignocellulose mixture to soil (1:5, w/w) was used as a biostimulation approach.

Assessment of degradation potential of aliphatic hydrocarbons by autochthonous filamentous fungi from a historically polluted clay soil.

The present work was aimed at isolating and identifying the main members of the mycobiota of a clay soil historically contaminated by mid- and long-chain aliphatic hydrocarbons (AH) and to subsequently assess their hydrocarbon-degrading ability. All the isolates were Ascomycetes and, among them, the most interesting was Pseudoallescheria sp. 18A, which displayed both the ability to use AH as the sole carbon source and to profusely colonize a wheat straw:poplar wood chip (70:30, w/w) lignocellulosic mixture (LM) selected as the amendment for subsequent soil remediation microcosms.

Implications of polluted soil biostimulation and bioaugmentation with spent mushroom substrate (Agaricus bisporus) on the microbial community and polycyclic aromatic hydrocarbons biodegradation.

Different applications of spent Agaricus bisporus substrate (SAS), a widespread agro-industrial waste, were investigated with respect to the remediation of a historically polluted soil with Polycyclic Aromatic Hydrocarbons (PAH). In one treatment, the waste was sterilized (SSAS) prior to its application in order to assess its ability to biostimulate, as an organic amendment, the resident soil microbiota and ensuing contaminant degradation. For the other treatments, two bioaugmentation approaches were investigated; the first involved the use of the waste itself and thus implied the application of A.

Screening, isolation, and characterization of glycosyl-hydrolase-producing fungi from desert halophyte plants.

Fungal strains naturally occurring on the wood and leaves of the salt-excreting desert tree Tamarix were isolated and characterized for their ability to produce cellulose- and starch-degrading enzymes. Of the 100 isolates, six fungal species were identified by ITS1 sequence analysis. No significant differences were observed among taxa isolated from wood samples of different Tamarix species, while highly salt-tolerant forms related to the genus Scopulariopsis (an anamorphic ascomycete) occurred only on the phylloplane of T.

Pleurotus ostreatus biofilms exhibit higher tolerance to toxicants than free-floating counterparts.

The MBEC(TM)-High Throughput Assay based on the Calgary Biofilm Device was used to produce and to characterize Pleurotus ostreatus biofilms. Hydroxyapatite coating of pegs was required to enable biofilm attachment; biofilm amounts and homogeneity of distribution were markedly improved upon removal of non-sessile biomass after 48 h from inoculation. Scanning electron microscopy showed surface-associated and multi-layered growth stabilized by the presence of an extracellular matrix (ECM).

Characterization of Pleurotus ostreatus biofilms by using the calgary biofilm device.

The adequacy of the Calgary biofilm device, often referred to as the MBEC system, as a high-throughput approach to the production and subsequent characterization of Pleurotus ostreatus biofilms was assessed. The hydroxyapatite-coating of pegs was necessary to enable biofilm attachment, and the standardization of vegetative inocula ensured a uniform distribution of P. ostreatus biofilms, which is necessary for high-throughput evaluations of several antimicrobials and exposure conditions.

Addition of maize stalks and soybean oil to a historically PCB-contaminated soil: effect on degradation performance and indigenous microbiota.

Objective of this study was to assess the single or combined effect of a plant oil and a lignocellulosic waste, namely soybean oil (SO) and maize stalks (MS), respectively, on resident microbiota and bioremediation performances of a soil historically contaminated by medium to highly chlorinated PCBs. Higher concentrations of both biphenyl- and chlorobenzoate-degrading cultivable bacteria were found in the MS-amended microcosms (MSM) than the non amended or SO-amended ones after 30 d incubation at 28°C. Fungal growth, instead, was strikingly stimulated in the microcosms that had undergone concomitant MS and SO supplementation (MS-SOM).

Effect of additives on enzyme-catalyzed polymerization of phenols and aromatic amines.

Among biological approaches to the removal of aromatic amines and phenols from wastewater, the so-called enzyme-catalyzed polymerization and precipitation (ECPP) process relies on the use of oxidoreductases acting via radical mechanisms and characterized by a rather relaxed substrate specificity, such as laccase, tyrosinase and peroxidases. The main technical constraints of ECPP processes are due to a variety of enzyme deactivation phenomena occurring during catalysis and to the incomplete removal of oxidation products from solution. In order to put ECPP into practice, these drawbacks have to be either counteracted or minimized.

Bioaugmentation of a historically contaminated soil by polychlorinated biphenyls with Lentinus tigrinus.

Background: Several species belonging to the ecological group of white-rot basidiomycetes are able to bring about the remediation of matrices contaminated by a large variety of anthropic organic pollutants. Among them, polychlorobiphenyls (PCBs) are characterized by a high recalcitrance due to both their low bioavailability and the inability of natural microbial communities to degrade them at significant rates and extents. Objective of this study was to assess the impact of a maize stalk-immobilized Lentinus tigrinus CBS 577.

Development and testing of a novel lab-scale direct steam-injection apparatus to hydrolyse model and saline crop slurries.

In this work, a novel laboratory-scale direct steam-injection apparatus (DSIA) was developed to overcome the main drawback of the conventional batch-driven lab rigs, namely the long time needed to heat fiber slurry from room to reaction temperatures greater than 150 °C. The novel apparatus mainly consisted of three units: (i) a mechanically-stirred bioreactor where saturated steam at 5-30 bar can be injected; (ii) an automatic on-off valve to flash suddenly the reaction medium after a prefixed reaction time; (iii) a cyclone separator to recover the reacted slurry. This system was tested using 0.

An efficient PAH-degrading Lentinus (Panus) tigrinus strain: effect of inoculum formulation and pollutant bioavailability in solid matrices.

This study comparatively investigated the PAH degradation ability of Lentinus tigrinus and Irpex lacteus in a historically polluted soil and creosote-impregnated shavings. With this regard, the effect of type of inoculum carrier (i.e.

Inoculum carrier and contaminant bioavailability affect fungal degradation performances of PAH-contaminated solid matrices from a wood preservation plant.

The objective of the study was to investigate the impact of chopped wheat straw (CWS), ground corn cobs (GCC) and commercial pellets (CP), as inoculum carriers, on both growth and polycyclic aromatic hydrocarbons (PAH) degradation performances of Dichomitus squalens, Pleurotus ostreatus and Coprinus comatus. A historically-contaminated soil (HCS) and creosote-treated shavings (CTS) from the Sobeslav wood preservation plant, characterized by different relative abundances of the PAH bioavailable fractions, were used to assess the contaminated matrix effect and its interaction with both carrier and fungal strain. In HCS, best results were obtained with CP-immobilized P.