Filamentous marine Gram-positive Nocardiopsis dassonvillei biofilm as biocathode and its electron transfer mechanism.

This study investigated electrochemical characteristics of Gram-positive, Nocardiopsis dassonvillei B17 facultative bacterium in bioelectrochemical systems. The results demonstrated that anodic and cathodic reaction rates were catalyzed by this bacterium, especially by utilization of aluminium alloy as a substrate. Cyclic voltammogram results depicted an increase of peak current and surface area through biofilm development, confirming its importance on catalysis of redox reactions.

Ectoines production from biogas in pilot bubble column bioreactors and their subsequent extraction via bio-milking.

Despite the potential of biogas from waste/wastewater treatment as a renewable energy source, the presence of pollutants and the rapid decrease in the levelized cost of solar and wind power constrain the use of biogas for energy generation. Biogas conversion into ectoine, one of the most valuable bioproducts (1000 €/kg), constitutes a new strategy to promote a competitive biogas market. The potential for a stand-alone 20 L bubble column bioreactor operating at 6% NaCl and two 10 L interconnected bioreactors (at 0 and 6% NaCl, respectively) for ectoine production from biogas was comparatively assessed.

Microbial Electrochemically Assisted Treatment Wetlands: Current Flow Density as a Performance Indicator in Real-Scale Systems in Mediterranean and Northern European Locations.

A METland is an innovative treatment wetland (TW) that relies on the stimulation of electroactive bacteria (EAB) to enhance the degradation of pollutants. The METland is designed in a short-circuit mode (in the absence of an external circuit) using an electroconductive bed capable of accepting electrons from the microbial metabolism of pollutants. Although METlands are proven to be highly efficient in removing organic pollutants, the study of EAB activity in full-scale systems is a challenge due to the absence of a two-electrode configuration.

Elucidating the key environmental parameters during the production of ectoines from biogas by mixed methanotrophic consortia.

Anaerobic digestion (AD) is a robust biotechnology for the valorisation of organic waste into biogas. However, the rapid decrease in renewable electricity prices requires alternative uses of biogas. In this context, the engineering of innovative platforms for the bio-production of chemicals from CH has recently emerged.

Modeling and optimization strategies towards performance enhancement of microbial fuel cells.

Considering the complexity associated with bioelectrochemical processes, the performance of a microbial fuel cell (MFC) is governed by input operating parameters. For scaled-up applications, a MFC system needs to be modeled from engineering perspectives in terms of optimum operating conditions to get higher performance and energy recovery. Several conceptual numerical models to advanced computational simulation approaches have been developed to represent simple-form of a complex MFC system.

Innovative operational strategies in photosynthetic biogas upgrading in an outdoors pilot scale algal-bacterial photobioreactor.

Three innovative operational strategies were successfully evaluated to improve the quality of biomethane in an outdoors pilot scale photobioreactor interconnected to an external absorption unit: i) the use of a greenhouse during winter conditions, ii) a direct CO stripping in the photobioreactor via air stripping during winter conditions and iii) the use of digestate as make-up water during summer conditions. CO concentrations in the biomethane ranged from 0.4% to 6.

Bidirectional microbial electron transfer: Switching an acetate oxidizing biofilm to nitrate reducing conditions.

Up to date a few electroactive bacteria embedded in biofilms are described to catalyze both anodic and cathodic reactions in bioelectrochemical systems (i.e. bidirectional electron transfer).

Microbial characterization of anode-respiring bacteria within biofilms developed from cultures previously enriched in dissimilatory metal-reducing bacteria.

This work evaluated the use of a culture enriched in DMRB as a strategy to enrich ARB on anodes. DMRB were enriched with Fe(III) as final electron acceptor and then transferred to a potentiostatically-controlled system with an anode as sole final electron acceptor. Three successive iron-enrichment cultures were carried out.

Long-term continuous production of H2 in a microbial electrolysis cell (MEC) treating saline wastewater.

A biofilm-based 4 L two chamber microbial electrolysis cell (MEC) was continuously fed with acetate under saline conditions (35 g/L NaCl) for more than 100 days. The MEC produced a biogas highly enriched in H2 (≥90%). Both current (10.

Specific and efficient electrochemical selection of Geoalkalibacter subterraneus and Desulfuromonas acetoxidans in high current-producing biofilms.

Two different saline sediments were used to inoculate potentiostatically controlled reactors (a type of microbial bioelectrochemical system, BES) operated in saline conditions (35 gNaCl l(-1)). Reactors were fed with acetate or a mixture of acetate and butyrate at two pH values: 7.0 or 5.

High current density via direct electron transfer by the halophilic anode respiring bacterium Geoalkalibacter subterraneus.

In this study the characterization of Geoalkalibacter subterraneus is presented, which is a novel halophilic anode respiring bacterium (ARB) previously selected and identified in a potentiostatically controlled bioelectrochemical system (BES) inoculated with sediments from a salt plant. Pure culture electroactive biofilms of Glk. subterraneus were grown during chronoamperometric batch experiments at a graphite electrode poised at +200 mV (vs.

Electron transfer and biofilm formation of Shewanella putrefaciens as function of anode potential.

Shewanellaceae are among the most widely studied electroactive microorganisms. In this report, we studied the influence of the applied electrode potential on the anodic current production of Shewanella putrefaciens NCTC 10695 under anoxic conditions. Furthermore, we used cyclic voltammetry (CV) and confocal laser scanning microscopy (CLSM) to investigate the microbial electron transfer and biofilm formation.

Electroactive mixed culture derived biofilms in microbial bioelectrochemical systems: the role of pH on biofilm formation, performance and composition.

The pH-value played a crucial role for the development and current production of anodic microbial electroactive biofilms. It was demonstrated that only a narrow pH-window, ranging from pH 6 to 9, was suitable for growth and operation of biofilms derived from pH-neutral wastewater. Any stronger deviation from pH neutral conditions led to a substantial decrease in the biofilm performance.

Cyclic voltammetric analysis of the electron transfer of Shewanella oneidensis MR-1 and nanofilament and cytochrome knock-out mutants.

Shewanella is frequently used as a model microorganism for microbial bioelectrochemical systems. In this study, we used cyclic voltammetry (CV) to investigate extracellular electron transfer mechanisms from S. oneidensis MR-1 (WT) and five deletion mutants: membrane bound cytochrome (∆mtrC/ΔomcA), transmembrane pili (ΔpilM-Q, ΔmshH-Q, and ΔpilM-Q/ΔmshH-Q) and flagella (∆flg).

Effect of inhibition treatment, type of inocula, and incubation temperature on batch H2 production from organic solid waste.

Two types of induction treatments (heat-shock pretreatment, HSP, and acetylene, Ac), inocula (meso and thermophilic) and incubation temperatures (37 and 55 degrees C) were tested according to a full factorial design 2(3) with the aim of assessing their effects on cumulative H(2) production (P(H), mmol H(2)/mini-reactor), initial H(2) production rate (R(i,H), micromol H(2)/(g VS(i) x h)), lag time (T(lag), h), and metabolites distribution when fermenting organic solid waste with an undefined anerobic consortia in batch mini-reactors. Type of inocula did not have a significant effect on P(H), T(lag), and R(i,H) except for organic acids production: mini-reactors seeded with thermophilic inocula had the highest organic acid production. Concerning the induction treatment, it was found that on the average Ac only affected in a positive way the P(H) and T(lag).

Improvement of biohydrogen production from solid wastes by intermittent venting and gas flushing of batch reactors headspace.

Headspace of batch minireactors was intermittently vented and gas flushed with N2 in order to enhance H2 production (PH) by anaerobic consortia degrading organic solid wastes. Type of inocula (meso and thermophilic), induction treatment (heat-shock pretreatment, HSP, and acetylene, Ac), and incubation temperature (37 and 55 degrees C) were studied by means of a factorial design. On average, it was found that mesophilic incubation had the most significant positive effect on PH followed by treatment with Ac, although the units with the best performance (high values of PH, initial hydrogen production rate, and short lag time) were those HSP-induced units incubated at 37 degrees C (type of inocula was not significant).